Combined Synopsis/Solicitation: X-ray Photoelectron Spectroscopy (XPS) System with additional tools
ID: 1333ND25QNB030154Type: Combined Synopsis/Solicitation
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

SEMICONDUCTOR DEVICES AND ASSOCIATED HARDWARE (5961)

Set Aside

No Set aside used (NONE)

Original Source

https://sam.gov/opp/e60c12632ddd45cca46d2092c2a65568/view
Timeline
    Description

    The National Institute of Standards and Technology (NIST) is seeking quotations for the procurement of an X-ray Photoelectron Spectroscopy (XPS) System to enhance its CHIPS Metrology Program, which is crucial for improving semiconductor manufacturing processes. The requirements include the delivery, installation, and validation of a complete XPS system that operates under ultra-high vacuum conditions and supports various analytical capabilities, including Hard X-ray Photoelectron Spectroscopy (HAXPES). This procurement is vital for advancing research in semiconductor technology and ensuring compliance with federal standards, with a focus on technical capability and prior experience during the evaluation process. Interested vendors must submit their firm-fixed-price quotes electronically and ensure they are registered in the System for Award Management (SAM) by the submission deadline, with further inquiries directed to Nina Lin at nina.lin@nist.gov or Tracy Retterer at Tracy.retterer@nist.gov.

    Point(s) of Contact
    Nina Lin
    nina.lin@nist.gov
    Tracy Retterer
    Tracy.retterer@nist.gov
    Files
    Title
    Posted
    Amendment 01 Q and A 6-13-25.docx
    The document is an amendment to the solicitation 1333ND25QNB030154 for an X-ray photoelectron spectroscopy (XPS) system, issued on June 13, 2025, by the National Institute of Standards and Technology (NIST). Its primary goal is to address inquiries from potential bidders regarding the project. Key points include the clarification that tariff exemptions for semiconductor tools must be verified through customs classifications, and bidders are instructed to include a Not-To-Exceed (NTE) amount for potential tariffs in their price quotes. Additionally, it specifies that while three large specimen holders are referenced, only one is intended for use at a time within the XPS system, with the additional holders available for sample preparation and transfer functions. This amendment aims to ensure clarity in the solicitation process and facilitate a transparent bidding environment for interested parties.
    Combined Synopsis Solicitation1333ND25QNB030154.docx
    The National Institute of Standards and Technology (NIST) has issued a combined synopsis and solicitation for a Request for Quotation (RFQ) regarding the acquisition of an X-ray Photoelectron Spectroscopy (XPS) System. This procurement is governed under simplified acquisition procedures according to FAR 13.5, and aims to support NIST's Metrology Program within its Materials Measurement Science Division. The RFQ number 1333ND25QNB030154 outlines the requirement for a complete XPS system inclusive of delivery, installation, and training, with options for extended service contracts and warranties. Offerors must provide firm-fixed-price quotes and demonstrate compliance with the detailed Statement of Work (SOW) attached to the RFQ. The procurement is open to all businesses, without size restrictions, although NAICS code 334516 applies. A crucial aspect of evaluation emphasizes technical capability and prior experience, where non-price factors are prioritized over price. Offerors are required to submit their quotations electronically and must be registered in the System for Award Management (SAM) at the time of submission. The document includes various provisions, clauses, and instructions necessary for compliance, decision criteria for awarding the contract, and provisions for potential protests related to the procurement process.
    Self_Attestation_Common_Form_FINAL_508c.pdf
    The Secure Software Development Attestation Form, issued by the Department of Homeland Security's Cybersecurity and Infrastructure Security Agency (CISA), aims to ensure that software utilized by federal agencies is developed securely. This form stems from the Federal Information Security Modernization Act (FISMA) and Executive Order 14028, which emphasize the need for enhanced cybersecurity in software supply chains. Software producers must self-attest to specific secure practices when developing software released after September 14, 2022, or when significant changes are made to existing software. The form outlines requirements for secure environments, trusted source code supply chains, and vulnerability management. If a producer fails to provide an attestation, agencies may still use the software if they document non-compliance areas and implement mitigating strategies. Signed by the CEO or authorized designee, the attestation confirms adherence to established security practices. The process ensures that federal agencies only engage with software that meets specified security standards, reflecting a strong commitment to cybersecurity across government operations. This initiative supports broader federal goals for secure software development, promoting accountability among vendors in safeguarding national cybersecurity frameworks.
    Statement of Work.docx
    The NIST requires a new X-ray Photoelectron Spectroscopy (XPS) system to enhance its CHIPS Metrology Program, aiming to improve semiconductor manufacturing processes. The contractor's responsibilities include delivering, installing, and validating the XPS system, which must meet specific requirements, including capabilities for ultra-high vacuum operation, small area spectroscopy, and Hard X-ray Photoelectron Spectroscopy (HAXPES). The system will support various research projects, allowing evaluation of surface compositions and chemical properties of materials. The project comprises multiple line item contracts (CLINs), including the apparatus itself, maintenance services, and uninterruptible power supply, with an option for additional analytical components. Deliverables must follow a strict timeline, including site preparation, installation, and training of NIST staff on system operation. The document outlines warranties, service contracts, and cybersecurity requirements to ensure operational integrity and compliance with federal standards. Overall, this solicitation highlights the U.S. government's commitment to advancing research in semiconductor technology through robust measurement science capabilities.
    Lifecycle
    Title
    Type
    Combined Synopsis/Solicitation: X-ray Photoelectron Spectroscopy (XPS) System with additional tools
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Atomic Force Microscope for use in a Scanning Electron Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a compact Atomic Force Microscope (AFM) intended for use in conjunction with a Scanning Electron Microscope (SEM). This procurement is part of the CHIPS Act initiative aimed at enhancing metrology research and development to support semiconductor manufacturing, with a focus on improving device reliability through advanced measurement technologies. The AFM will facilitate live imaging and analysis of two-dimensional materials, crucial for understanding device performance and failure mechanisms, thereby streamlining the fabrication and optimization processes for next-generation semiconductor devices. Interested vendors should contact Cielo Ibarra at cielo.ibarra@nist.gov and submit their responses by the specified deadlines, ensuring they include relevant company information and capabilities.
    Sources Sought Notice for CHIPS R&D Data Acquisition System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice for a Data Acquisition System (DAQ) to support its CHIPS Metrology program. This procurement aims to identify potential sources capable of providing a DAQ system that can measure resistance and temperature changes in advanced packaging materials during accelerated aging experiments, which are critical for assessing the long-term reliability of semiconductor chips. The DAQ system will play a vital role in enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, ultimately contributing to improved design efficiency and cost savings. Interested manufacturers should respond with detailed information about their products and capabilities to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Optical Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of an Optical Microscope. The primary objective is to support the NIST CHIPS Metrology R&D program, which focuses on nondestructive defect detection metrology for semiconductor advanced packaging, requiring a microscope capable of various imaging modes and equipped with advanced features for precision measurements. This procurement is critical for enhancing the accuracy of defect detection in semiconductor failure analysis, with a focus on characterizing defects through precise optical measurements. Interested vendors should submit their capabilities and relevant information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, while noting that this notice does not constitute a commitment to award a contract.
    Sources Sought Notice for Xray Tomography Software
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking potential sources for X-ray computed tomography (XCT) simulation software through a sources sought notice (NIST-SS26-CHIPS-26). This software is vital for the NIST CHIPS Metrology R&D program's nondestructive defect detection metrology project, which aims to enhance the accuracy and efficiency of semiconductor failure analysis by generating simulated data sets for XCT defect detection. Key requirements for the software include the ability to simulate various X-ray sources, utilize 3D surface meshes, simulate scattering effects, and output radiographs in standard image formats, among other capabilities. Interested parties must respond with detailed company information and product specifications by December 15, 2025, and can contact Elizabeth Timberlake at elizabeth.timberlake@nist.gov or Donald Collie at donald.collie@nist.gov for further inquiries.
    CHIPS R&D Electrical/thermal TEM holder – Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a specialized electrical/thermal transmission electron microscope (TEM) holder system and compatible microelectromechanical system (MEMS)-based chips for advanced semiconductor research. This procurement aims to enhance measurement capabilities critical for evaluating the readiness of next-generation semiconductors by detecting early-stage indicators of material degradation and device failure under operational conditions. The TEM holder and associated equipment will support NIST's mission to improve manufacturing processes and assess advanced materials in semiconductor production, particularly focusing on two-dimensional and wide bandgap semiconductors. Interested vendors should respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Sources Sought Notice for Coupled Device Detector Camera System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information from qualified vendors regarding a Coupled Device Detector Camera System through a sources sought notice (NIST-SS26-CHIPS-25). This procurement aims to support the CHIPS RF Waveform and Rapid Frequency Comb Diagnostics for Plasma Etching Project, which focuses on enhancing plasma etching efficiencies via in situ optical diagnostics. The required system includes an intensified electron multiplication charge coupled device (IEMCCD) camera with specific technical specifications, including ultra-low noise, high gain, and fast optical emission spectroscopy capabilities. Interested parties should provide detailed company information, product specifications, and performance capabilities, and may contact Elizabeth Timberlake at elizabeth.timberlake@nist.gov or Donald Collie at donald.collie@nist.gov for further inquiries.
    Electrochemical Liquid TEM Holder System with Heating/Cooling - Combined Sources Sought Notice and Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Electrochemical Liquid TEM Holder System with Heating/Cooling through a combined sources sought notice and notice of intent to sole source. This acquisition is part of the CHIPS R&D Metrology Grant Challenge Project 7.03, aimed at developing thermodynamic datasets and measurement platforms for critical material recovery from microelectronic waste. The system must be compatible with Thermo Fisher Scientific TEMs and X-ray scattering beamlines, featuring integrated electrochemical and temperature control capabilities, along with specific design requirements and comprehensive support services. Interested vendors should contact Nina Lin at nina.lin@nist.gov or Donald Collie at donald.collie@nist.gov for further details, as market research has indicated that Protochips, Inc. is the only capable source for this procurement.
    Combined Sources Sought Notice and Notice of Intent to Sole Source for Sparce Scanning Device
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is conducting a sources sought notice to identify potential sources for a compressed sensing scan generator, which is critical for advancing imaging and measurement solutions in integrated circuit (IC) overlay metrology. The procurement aims to enhance the speed and accuracy of image acquisition for semiconductor manufacturing processes, utilizing artificial intelligence and advanced image processing techniques. This initiative is part of the CHIPS R&D Program, which focuses on improving measurement capabilities essential for IC production. Interested vendors are encouraged to respond with their capabilities and relevant product information to the primary contact, Nina Lin, at nina.lin@nist.gov, by the specified deadline, as the government intends to issue a sole source award to Panoscientific, LLC if no other capable sources are identified.
    Sources Sought Notice for Mid-IR Optical Frequency Comb
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), has issued a Sources Sought Notice for Mid-IR Optical Frequency Comb Systems to support its CHIPS Metrology Program's Grand Challenge 1. NIST requires three systems for applications in broadband spectroscopy, spectral reference databases, and new laser diagnostics in semiconductor processes, along with an additional system to fill a critical gap in long-wave infrared spectroradiometry and molecular spectroscopy for the space, defense, and satellite industries. Interested vendors are invited to provide information regarding their capabilities, including product specifications, customization options, and available services, while ensuring that proprietary information is not disclosed. Responses should be submitted via email to Forest Crumpler at forest.crumpler@nist.gov, as NIST seeks to gather market insights to inform future procurement decisions.
    Sole Source Justification Field Emission Scanning Electron Microscope (FESEM)
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a Sole Source Field Emission Scanning Electron Microscope (FESEM) through a Justification for Other Than Full and Open Competition (JOFOC). This procurement is essential for advancing NIST's capabilities in laboratory equipment and supplies, particularly in high-resolution imaging and analysis. The justification for this sole source acquisition will be publicly available within 14 days of the contract award, and the opportunity will remain open for 30 days in accordance with federal regulations. Interested parties can reach out to Nina Lin at nina.lin@nist.gov or Forest Crumpler at forest.crumpler@nist.gov for further inquiries.