Sources Sought Notice for CHIPS R&D Data Acquisition System
ID: NIST-SS26-CHIPS-50Type: Sources Sought
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

LABORATORY EQUIPMENT AND SUPPLIES (6640)

Original Source

https://sam.gov/workspace/contract/opp/5632884857a64e529c1aeb6c96b70253/view
Timeline
    Description

    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice for a Data Acquisition System (DAQ) to support its CHIPS Metrology program. This procurement aims to identify potential sources capable of providing a DAQ system that can measure resistance and temperature changes in advanced packaging materials during accelerated aging experiments, which are critical for assessing the long-term reliability of semiconductor chips. The DAQ system will play a vital role in enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, ultimately contributing to improved design efficiency and cost savings. Interested manufacturers should respond with detailed information about their products and capabilities to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.

    Point(s) of Contact
    Tracy Retterer
    Tracy.retterer@nist.gov
    Donald Collie
    donald.collie@nist.gov
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Sources Sought Notice for CHIPS R&D Data Acquisition System
    Currently viewing
    Sources Sought
    Similar Opportunities
    CHIPS R&D: Extreme Thermal Cycling Chamber– Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Extreme Thermal Cycling Chamber to support its CHIPS Metrology program, which focuses on the reliability of materials used in advanced semiconductor packaging. The chamber must meet specific technical requirements, including a temperature range of -100 °C to 200 °C and a cycling rate of at least 70 °C/min, to facilitate accelerated aging experiments on polymeric components. This procurement is critical for enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, and interested vendors are encouraged to respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Sources Sought Notice for CHIPS R&D Optical frequency comb, Control electronics
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting a Sources Sought Notice to identify potential sources for a Mid-Infrared Femtosecond Laser Source, Femtosecond Laser Control Electronics, and an Ultrastable Laser System as part of its CHIPS Metrology Program. The objective is to enhance measurement science critical to semiconductor manufacturing processes, particularly in plasma etching, by acquiring advanced optical frequency comb diagnostics. This procurement is vital for improving the correlation between reactor inputs and etching outcomes, thereby facilitating the development of next-generation plasma etching processes. Interested manufacturers are encouraged to submit their capabilities and relevant product information to Tracy Retterer at tracy.retterer@nist.gov or Donald Collie at donald.collie@nist.gov, with responses preferred before the closing date, as this notice is for market research purposes only and does not guarantee a contract award.
    High-Performance 3D Digital Image Correlation (DIC) System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information on potential sources for a High-Performance 3D Digital Image Correlation (DIC) System. This system is intended for precise, in-situ measurement of displacement and strain under various thermal and mechanical loading conditions, which is crucial for developing advanced testing methodologies and accurate failure prediction models in electronic packaging. The DIC system will play a vital role in addressing new failure mechanisms in 3D integrated devices, supporting the CHIPS Metrology program's objectives. Interested parties should contact Nina Lin at nina.lin@nist.gov for further details, and responses to this sources sought notice should be submitted promptly, as there is no solicitation available at this time.
    CHIPS R&D Electrical/thermal TEM holder – Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a specialized electrical/thermal transmission electron microscope (TEM) holder system and compatible microelectromechanical system (MEMS)-based chips for advanced semiconductor research. This procurement aims to enhance measurement capabilities critical for evaluating the readiness of next-generation semiconductors by detecting early-stage indicators of material degradation and device failure under operational conditions. The TEM holder and associated equipment will support NIST's mission to improve manufacturing processes and assess advanced materials in semiconductor production, particularly focusing on two-dimensional and wide bandgap semiconductors. Interested vendors should respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Sources Sought Notice for Coupled Device Detector Camera System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information from qualified vendors regarding a Coupled Device Detector Camera System through a sources sought notice (NIST-SS26-CHIPS-25). This procurement aims to support the CHIPS RF Waveform and Rapid Frequency Comb Diagnostics for Plasma Etching Project, which focuses on enhancing plasma etching efficiencies via in situ optical diagnostics. The required system includes an intensified electron multiplication charge coupled device (IEMCCD) camera with specific technical specifications, including ultra-low noise, high gain, and fast optical emission spectroscopy capabilities. Interested parties should provide detailed company information, product specifications, and performance capabilities, and may contact Elizabeth Timberlake at elizabeth.timberlake@nist.gov or Donald Collie at donald.collie@nist.gov for further inquiries.
    Environmental test chamber
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information from qualified vendors regarding the procurement of an Environmental Test Chamber and a Water Recirculation System as part of a Sources Sought Notice (NIST-SS26-CHIPS-29). The Environmental Test Chamber must meet specific requirements, including a workspace of over 1.5 cubic feet, a temperature range of -35°C to +175°C, and humidity control between 10%-95% RH, among other technical specifications, to support metrology research for semiconductor device manufacturing. This procurement is crucial for evaluating materials used in semiconductor devices, thereby enhancing device reliability and performance. Interested parties should submit their responses, including company information and product specifications, to Junee Johnson at junee.johnson@nist.gov, as this notice is for market research purposes and no solicitation is currently available.
    Atomic Force Microscope for use in a Scanning Electron Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a compact Atomic Force Microscope (AFM) intended for use in conjunction with a Scanning Electron Microscope (SEM). This procurement is part of the CHIPS Act initiative aimed at enhancing metrology research and development to support semiconductor manufacturing, with a focus on improving device reliability through advanced measurement technologies. The AFM will facilitate live imaging and analysis of two-dimensional materials, crucial for understanding device performance and failure mechanisms, thereby streamlining the fabrication and optimization processes for next-generation semiconductor devices. Interested vendors should contact Cielo Ibarra at cielo.ibarra@nist.gov and submit their responses by the specified deadlines, ensuring they include relevant company information and capabilities.
    Optical Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of an Optical Microscope. The primary objective is to support the NIST CHIPS Metrology R&D program, which focuses on nondestructive defect detection metrology for semiconductor advanced packaging, requiring a microscope capable of various imaging modes and equipped with advanced features for precision measurements. This procurement is critical for enhancing the accuracy of defect detection in semiconductor failure analysis, with a focus on characterizing defects through precise optical measurements. Interested vendors should submit their capabilities and relevant information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, while noting that this notice does not constitute a commitment to award a contract.
    Custom Magneto-resistive Sensors
    Commerce, Department Of
    The National Institute of Standards and Technology (NIST) is seeking responses to a Sources Sought Notice for the fabrication of custom magneto-resistive sensors. These sensors are intended for use in a scanning magnetic microscope being developed for the CHIPS Metrology Project, specifically for acquiring 3D thermal images in semiconductor packages. The procurement requires sensors that meet specific technical specifications, including a frequency range from DC to 100 kHz, field sensitivity parameters, and operational conditions, with a minimum delivery of 100 sensors. Interested parties should respond to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov, with their capabilities and relevant experience by the deadline of December 12, 2025, for any questions regarding the notice.
    Sources Sought Notice for Mid-IR Optical Frequency Comb
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), has issued a Sources Sought Notice for Mid-IR Optical Frequency Comb Systems to support its CHIPS Metrology Program's Grand Challenge 1. NIST requires three systems for applications in broadband spectroscopy, spectral reference databases, and new laser diagnostics in semiconductor processes, along with an additional system to fill a critical gap in long-wave infrared spectroradiometry and molecular spectroscopy for the space, defense, and satellite industries. Interested vendors are invited to provide information regarding their capabilities, including product specifications, customization options, and available services, while ensuring that proprietary information is not disclosed. Responses should be submitted via email to Forest Crumpler at forest.crumpler@nist.gov, as NIST seeks to gather market insights to inform future procurement decisions.