Notice of Intent to Sole Source for Test Vehicle to Study Reliability of Materials Used in Advanced Packaging of Semiconductor Chips
ID: ACQ0042379Type: Special Notice
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

LABORATORY EQUIPMENT AND SUPPLIES (6640)

Original Source

https://sam.gov/opp/801c54b0490844b6a25379256211066d/view
Timeline
    Description

    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to noncompetitively acquire 200 Advanced Test Vehicles to study the reliability of materials used in the advanced packaging of semiconductor chips. This procurement is part of the CHIPS Metrology program, focusing on the evaluation of polymeric components such as underfill epoxies and thermal interface materials, with specific requirements for design capabilities, embedded sensors, and modular testing processes. The acquisition is justified under FAR 13.106-1(b), following market research that identified The Research Foundation for The State University of New York as the only suitable provider. Interested parties are encouraged to respond with their capabilities to potentially compete for this contract, and inquiries can be directed to Nina Lin at nina.lin@nist.gov or Donald Collie at donald.collie@nist.gov.

    Point(s) of Contact
    Nina Lin
    nina.lin@nist.gov
    Donald Collie
    donald.collie@nist.gov
    Files
    Title
    Posted
    NOI SS Test Vehicle for Reliability Study.docx
    The federal notice ACQ0042379 from NIST announces the intent to noncompetitively acquire 200 Advanced Test Vehicles to study reliability in advanced semiconductor packaging materials. This initiative supports the CHIPS Metrology program, focusing on polymeric components like underfill epoxies and thermal interface materials. Key specifications include stringent design and layout capabilities, embedded resistivity-based sensors, and requirements for modularity and testing processes. The acquisition is justified under FAR 13.106-1(b) and involves market research conducted by NIST, which identified only The Research Foundation for The State University of New York as a suitable provider. Interested sources are invited to respond to this notice with their capabilities and necessary details to potentially compete for the contract. This approach highlights the government's need for specialized materials testing services in the semiconductor industry.
    Similar Opportunities
    Sources Sought Notice for CHIPS R&D Data Acquisition System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice for a Data Acquisition System (DAQ) to support its CHIPS Metrology program. This procurement aims to identify potential sources capable of providing a DAQ system that can measure resistance and temperature changes in advanced packaging materials during accelerated aging experiments, which are critical for assessing the long-term reliability of semiconductor chips. The DAQ system will play a vital role in enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, ultimately contributing to improved design efficiency and cost savings. Interested manufacturers should respond with detailed information about their products and capabilities to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Notice of Intent to Noncompetitively Acquire CHIPS R&D On-axis TEM tomography Holder
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to noncompetitively acquire an on-axis transmission electron microscopy (TEM) tomography holder to support its CHIPS atom probe tomography project in Boulder, Colorado. This specialized equipment is crucial for analyzing wire-based specimens used in the CAMECA Invizo 6000 atom probe microscope, which plays a significant role in the characterization of materials relevant to semiconductor manufacturing. The acquisition is based on market research indicating that Fischione Instruments is the only vendor capable of providing a compatible holder that meets NIST's stringent requirements. Interested parties who believe they can fulfill these requirements are encouraged to contact Tracy Retterer at tracy.retterer@nist.gov or Forest Crumpler at forest.crumpler@nist.gov with relevant information by the specified response date.
    CHIPS R&D: Extreme Thermal Cycling Chamber– Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Extreme Thermal Cycling Chamber to support its CHIPS Metrology program, which focuses on the reliability of materials used in advanced semiconductor packaging. The chamber must meet specific technical requirements, including a temperature range of -100 °C to 200 °C and a cycling rate of at least 70 °C/min, to facilitate accelerated aging experiments on polymeric components. This procurement is critical for enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, and interested vendors are encouraged to respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Electrochemical Liquid TEM Holder System with Heating/Cooling - Combined Sources Sought Notice and Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Electrochemical Liquid TEM Holder System with Heating/Cooling through a combined sources sought notice and notice of intent to sole source. This acquisition is part of the CHIPS R&D Metrology Grant Challenge Project 7.03, aimed at developing thermodynamic datasets and measurement platforms for critical material recovery from microelectronic waste. The system must be compatible with Thermo Fisher Scientific TEMs and X-ray scattering beamlines, featuring integrated electrochemical and temperature control capabilities, along with specific design requirements and comprehensive support services. Interested vendors should contact Nina Lin at nina.lin@nist.gov or Donald Collie at donald.collie@nist.gov for further details, as market research has indicated that Protochips, Inc. is the only capable source for this procurement.
    Optical Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of an Optical Microscope. The primary objective is to support the NIST CHIPS Metrology R&D program, which focuses on nondestructive defect detection metrology for semiconductor advanced packaging, requiring a microscope capable of various imaging modes and equipped with advanced features for precision measurements. This procurement is critical for enhancing the accuracy of defect detection in semiconductor failure analysis, with a focus on characterizing defects through precise optical measurements. Interested vendors should submit their capabilities and relevant information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, while noting that this notice does not constitute a commitment to award a contract.
    Atomic Force Microscope for use in a Scanning Electron Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a compact Atomic Force Microscope (AFM) intended for use in conjunction with a Scanning Electron Microscope (SEM). This procurement is part of the CHIPS Act initiative aimed at enhancing metrology research and development to support semiconductor manufacturing, with a focus on improving device reliability through advanced measurement technologies. The AFM will facilitate live imaging and analysis of two-dimensional materials, crucial for understanding device performance and failure mechanisms, thereby streamlining the fabrication and optimization processes for next-generation semiconductor devices. Interested vendors should contact Cielo Ibarra at cielo.ibarra@nist.gov and submit their responses by the specified deadlines, ensuring they include relevant company information and capabilities.
    Sources Sought Notice for CHIPS R&D Optical frequency comb, Control electronics
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting a Sources Sought Notice to identify potential sources for a Mid-Infrared Femtosecond Laser Source, Femtosecond Laser Control Electronics, and an Ultrastable Laser System as part of its CHIPS Metrology Program. The objective is to enhance measurement science critical to semiconductor manufacturing processes, particularly in plasma etching, by acquiring advanced optical frequency comb diagnostics. This procurement is vital for improving the correlation between reactor inputs and etching outcomes, thereby facilitating the development of next-generation plasma etching processes. Interested manufacturers are encouraged to submit their capabilities and relevant product information to Tracy Retterer at tracy.retterer@nist.gov or Donald Collie at donald.collie@nist.gov, with responses preferred before the closing date, as this notice is for market research purposes only and does not guarantee a contract award.
    Combined Sources Sought Notice and Notice of Intent to Sole Source for Sparce Scanning Device
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is conducting a sources sought notice to identify potential sources for a compressed sensing scan generator, which is critical for advancing imaging and measurement solutions in integrated circuit (IC) overlay metrology. The procurement aims to enhance the speed and accuracy of image acquisition for semiconductor manufacturing processes, utilizing artificial intelligence and advanced image processing techniques. This initiative is part of the CHIPS R&D Program, which focuses on improving measurement capabilities essential for IC production. Interested vendors are encouraged to respond with their capabilities and relevant product information to the primary contact, Nina Lin, at nina.lin@nist.gov, by the specified deadline, as the government intends to issue a sole source award to Panoscientific, LLC if no other capable sources are identified.
    Commercial semi-automatic probe stations
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of a commercial semi-automatic probe station. This equipment is essential for conducting reliability testing on silicon carbide field effect transistors (FETs), which are increasingly used in high-power semiconductor applications across various industries, including electric vehicles and energy storage. The probe station must meet specific technical requirements, including the capability to probe 300 mm wafers, accommodate small pad sizes, and include features such as a heated wafer chuck and a digital microscope. Interested vendors should submit their responses, including company details and relevant experience, to Cielo Ibarra at cielo.ibarra@nist.gov by December 12, 2025, for consideration in NIST's market research efforts.
    High-Performance 3D Digital Image Correlation (DIC) System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information on potential sources for a High-Performance 3D Digital Image Correlation (DIC) System. This system is intended for precise, in-situ measurement of displacement and strain under various thermal and mechanical loading conditions, which is crucial for developing advanced testing methodologies and accurate failure prediction models in electronic packaging. The DIC system will play a vital role in addressing new failure mechanisms in 3D integrated devices, supporting the CHIPS Metrology program's objectives. Interested parties should contact Nina Lin at nina.lin@nist.gov for further details, and responses to this sources sought notice should be submitted promptly, as there is no solicitation available at this time.