Oily Water Separator Renew Services
ID: 52000RFQ250012222Type: Special Notice
Overview

Buyer

HOMELAND SECURITY, DEPARTMENT OFUS COAST GUARDSFLC PROCUREMENT BRANCH 1(00080)NORFOLK, VA, 23510, USA

NAICS

All Other Miscellaneous General Purpose Machinery Manufacturing (333998)

PSC

TECHNICAL REPRESENTATIVE- SHIP AND MARINE EQUIPMENT (L020)

Original Source

https://sam.gov/opp/0d96ebc1e81f4155b8cdae3406e38ef9/view
Timeline
    Description

    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking to procure an oily water separator system for the Coast Guard Cutter Seneca, as the current unit is inoperable and too costly to repair. The procurement involves the provision and installation of a new oily water separator, which is crucial for managing oily waste and ensuring compliance with environmental regulations while at sea. The selected vendor will be responsible for operational testing in collaboration with Coast Guard engineering supervision, with the project scheduled to commence on September 1, 2025, at the vessel's location in Portsmouth, Virginia. Interested parties must respond in writing to Jacqueline D. Handley by April 4, 2025, with specific company information and capabilities, while noting that pricing information should not be included in the response.

    Point(s) of Contact
    Jacqueline D. Handley
    jacqueline.D.Handley@uscg.mil
    Patricia Fremming
    Patricia.M.Fremming@uscg.mil
    Files
    Title
    Posted
    SENECA OWS_SOW.docx
    The U.S. Coast Guard Cutter (CGC) Seneca has requested a new oily water separator system for the engine room due to the current unit being inoperable and deemed too costly to repair. This system is essential for the management of oily waste, enabling the vessel to efficiently pump out dirty oil and maintain bilge cleanliness while at sea. The scope of work includes the provision and installation of a new oily water separator, as dictated by OEM references and standards. The vendor selected must complete the unit's operational testing in collaboration with the Coast Guard's engineering supervision. This project is scheduled to start with repairs and personnel training on September 1. The work will take place at CGC Seneca's location in Portsmouth, VA, under the oversight of the designated Contracting Officer Technical Representative, LT Cody Tecson. The underlying purpose of this Request for Proposal (RFP) is to ensure compliance with environmental regulations by facilitating proper oily waste management aboard the vessel.
    Lifecycle
    Title
    Type
    Oily Water Separator Renew Services
    Currently viewing
    Special Notice
    Similar Opportunities
    PARTS KIT SEAL REPLACEMENT
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking quotations for a Parts Kit Seal Replacement, which includes a Servo Box Repair Kit essential for the maintenance of 210 A Class vessels. The procurement requires three kits from Propulsion Systems Inc, with strict adherence to packaging, marking, and delivery requirements to ensure compliance and prevent damage during transit. This opportunity is critical for maintaining the operational readiness of the Coast Guard's fleet, and interested vendors must submit their quotes by November 21, 2025, at 10:00 AM EST, while ensuring they meet all specified requirements, including registration with the System for Award Management (SAM). For inquiries, vendors can contact Yvette R. Johnson at YVETTE.R.JOHNSON@USCG.MIL.
    Defense Maritime Solutions - Wartsila Shaft & Rudder Seal Kits for Various Class Vessel's across Coast Guard
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is preparing to solicit proposals for the supply of Defense Maritime Solutions (DMS) OEM shaft and rudder seal kits for various class vessels. This procurement is limited to the original equipment manufacturer (OEM) or its authorized distributors, who will need to provide a cover letter, past performance questionnaire, proposed technical concept, and pricing as part of their submission. These seal kits are critical components for ensuring the operational integrity and safety of maritime vessels. Interested parties can reach out to William Zittle at william.r.zittle@uscg.mil or 410-762-6485, or Mark Cap at mark.cap@uscg.mil or 206-815-1521 for further information, although no responses are required at this time.
    FILTER AY-LUB OIL
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard's Surface Forces Logistics Center, is seeking quotes for the supply of FILTER AY-LUB OIL (part number RG192119HFS-G) with a delivery deadline set for October 16, 2025. Vendors are required to provide these specific gear lube oil filters, ensuring compliance with strict packaging and marking standards as outlined in military specifications, to guarantee safe delivery and proper identification. This procurement is critical for maintaining operational readiness and efficiency within the Coast Guard's fleet. Interested vendors must submit their quotes by July 24, 2025, and must be registered in SAM.gov to be eligible for consideration. For further inquiries, vendors can contact Stephanie Garity at stephanie.a.garity@uscg.mil or Daniel J. Nieves at daniel.j.nieves@uscg.mil.
    Imtra Wipers and parts
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking quotations for various Imtra wiper parts essential for the operation of the 45’ Response Boat Medium (RBM). The procurement includes specific items such as controllers, pumps, and nozzles, all manufactured by Imtra Corporation, which is the sole source due to the lack of technical data for equivalent products. This acquisition is critical for maintaining the operational readiness of the Coast Guard's fleet, and interested vendors must ensure they are registered with SAM.gov and comply with specific packaging and delivery requirements. Quotations are due by January 30, 2026, and inquiries can be directed to Michael Fitzer at Michael.G.Fitzer@uscg.mil or Cynthia A. Matthews at cynthia.a.matthews@uscg.mil.
    52000QR260001486 USCGC JOHN WITHERSPOON HULL CLEANING AND ZINC RENEWAL
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified small businesses to provide underwater hull inspection, cleaning, and zinc renewal services for the CGC JOHN WITHERSPOON. The procurement requires trained personnel to conduct thorough inspections and cleaning of the vessel's hull, coating system, and associated components, along with the replacement of zinc anodes, including 12 additional stern tube zincs not covered in standard procedures. This maintenance is critical for ensuring the operational readiness and longevity of the vessel and is scheduled to take place between February 10 and March 10, 2026, at USCG Base Ketchikan, Alaska. Interested vendors must submit their quotes by January 8, 2025, and can reach out to the primary contacts, Timothy Ford and Joshua Miller, via email for further inquiries.
    ACTUATOR,GOVERNOR
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is soliciting quotations for the inspection, repair, and potential overhaul of a Woodward Inc. engine generator regulator used on the CGC Polar Star. Bidders are required to submit a firm fixed price quote that includes inspection fees and shipping, adhering to OEM procedures and quality assurance standards, with the contract awarded to the lowest-priced, technically acceptable offeror. This procurement is critical for maintaining the operational readiness of the Coast Guard's fleet, ensuring that essential equipment is functioning reliably. Quotes are due by December 19, 2026, at 11:00 am EST, and interested parties should direct any questions to Stephanie Garity at stephanie.a.garity@uscg.mil by December 19, 2025.
    USCGC GEORGE COBB DS FY 26
    Homeland Security, Department Of
    The Department of Homeland Security, through the U.S. Coast Guard, is seeking proposals from qualified contractors for dockside repair services for the USCGC GEORGE COBB (WLM 564) as part of the FY 2026 maintenance schedule. This procurement, identified by RFQ70Z08526QIBCT0011, requires a Firm Fixed Price Definitive Contract and emphasizes the importance of technical capability and past performance over price in the evaluation process. The scope of work includes various repair and maintenance tasks, such as fire prevention, inspection of hydraulic systems, and cleaning of exhaust piping, all critical for maintaining the operational readiness of the vessel. Interested parties must submit their proposals via email by January 9, 2026, with an anticipated award date of February 17, 2026. For further inquiries, contact Ou Saephanh at Ou.T.Saephanh@uscg.mil or Sandra Martinez at Sandra.A.Martinez@uscg.mil.
    open inspect and report CORE ASSEMBLY,FLUID
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors to perform the opening, inspection, reporting, and overhaul of two Core Assembly Fluid units, identified by stock number 4420-01-496-9702 and part number N03877. The procurement requires the use of genuine parts from American Precision Industries Inc. and mandates a thorough refurbishment process to restore the units to their original operating specifications, including pressure and production tests to ensure performance. Interested vendors must submit their quotes by November 24, 2025, to Eric Goldstein at Eric.I.Goldstein@uscg.mil, with the total estimated cost for the overhaul not to exceed $21,080, and compliance with various federal regulations and certifications is required.
    52000QR260001642 USCGC FLORENCE FINCH HULL CLEANING
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors for the hull cleaning and zinc renewal of the USCGC FLORENCE FINCH, scheduled to take place from January 13-16, 2026. The contractor will be responsible for cleaning the vessel's underwater body, renewing bolt-on zinc anodes, and ensuring thorough cleaning of underwater surfaces while adhering to specified maintenance procedures. This procurement is crucial for maintaining the operational readiness and longevity of the vessel, which is vital for Coast Guard missions. Interested vendors must submit their firm-fixed price quotations by January 8, 2026, and can direct inquiries to Timothy Ford or Joshua Miller via the provided email addresses.
    DRYDOCK: USCGC SWORDFISH & OSPREY DD FY26
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified small businesses to perform drydock repairs for the USCGC SWORDFISH and USCGC OSPREY as part of a combined award for fiscal year 2026. The procurement includes extensive maintenance and repair work, such as ultrasonic testing of hull plating, preservation of underwater bodies, and mechanical overhauls, with specific performance periods set for each vessel: March 26, 2026, to May 19, 2026, for the SWORDFISH and September 15, 2026, to November 17, 2026, for the OSPREY. This opportunity is critical for maintaining the operational readiness and safety of the Coast Guard's fleet, ensuring compliance with environmental and safety standards. Interested contractors should contact Taylor Cregan at Taylor.S.Cregan@uscg.mil or LaToya Sorrell at Latoya.N.Sorrell@uscg.mil, with offers due by December 16, 2025, following the amendments to the solicitation.