Carbolite-Gero GLO 10/11-1G annealing furnace
ID: 89243325QFE000482Type: Solicitation
Overview

Buyer

ENERGY, DEPARTMENT OFENERGY, DEPARTMENT OFNATIONAL ENERGY TECHNOLOGY LABORATORYMORGANTOWN, WV, 26507, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

INDUSTRIAL FURNACES, KILNS, LEHRS, AND OVENS (4430)
Timeline
    Description

    The Department of Energy, specifically the National Energy Technology Laboratory, is seeking proposals for the procurement of a Carbolite-Gero GLO 10/11-1G annealing furnace. This solicitation aims to acquire a specialized industrial furnace that is crucial for analytical laboratory applications, particularly in the manufacturing of laboratory instruments. The procurement is significant as it supports research and development efforts in energy technologies. Interested vendors can reach out to Anissa M. Beasinger at Anissa.Beasinger@netl.doe.gov or call 412-596-0069 for further details regarding the solicitation process.

    Point(s) of Contact
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Similar Opportunities
    Phenom XL G3 SEM or equivalent
    Energy, Department Of
    The Department of Energy, through UT-Battelle LLC, is seeking proposals for the procurement of a Phenom XL G3 Scanning Electron Microscope (SEM) or an equivalent domestic model. This equipment is essential for the Enrichment Science and Engineering Division, which requires advanced microscopy capabilities for analytical purposes, including high magnification and elemental analysis. Proposals must be submitted by December 18, 2025, with a focus on the lowest priced, technically acceptable offer, and interested parties should direct inquiries to Brittany Waring at waringbc@ornl.gov. The procurement is not set aside for small businesses, and the NAICS code for this opportunity is 334516.
    Integrated Biorefinery Facility North High Bay Revitalization Custom Equipment
    Energy, Department Of
    The Department of Energy's National Renewable Energy Laboratory (NREL) is seeking proposals for the "Integrated Biorefinery Facility North High Bay Revitalization Custom Equipment" project, aimed at enhancing biomass conversion and waste carbon utilization technologies. The project requires the design, fabrication, and commissioning of specialized process equipment, including a Hydroprocessor and a Distillation Column, with a production capacity of approximately one barrel per day, emphasizing operational flexibility and process safety. This initiative is critical for advancing renewable technologies for commercial deployment, with an estimated funding range of $750,000 to $3.5 million and a performance period extending through March 30, 2027. Interested parties must submit their proposals by 5:00 PM Mountain Time on December 17, 2025, and can direct inquiries to Todd Labosky at Todd.Labosky@nrel.gov.
    Raman Spectrometer
    Energy, Department Of
    The Department of Energy's National Renewable Energy Laboratory (NREL) is seeking proposals for the procurement of a high-resolution Raman Spectrometer, aimed at enhancing its energy systems research capabilities. This solicitation, identified as RFQ Number 2026027058, requires a fully integrated confocal Raman microscope with specific technical specifications, including multiple gratings, a multichannel CCD detector, and high-temperature reaction capabilities, among others. The Raman Spectrometer is crucial for analyzing the phase and molecular structure of catalysts, which is essential for the development of advanced catalytic materials. Proposals are due by January 2, 2026, at 5 PM Mountain Time, and interested vendors must ensure their submissions include all required documentation, including SAM registration and compliance with the Buy American Act. For further inquiries, potential offerors can contact Janelle DiGregorio at Janelle.DiGregorio@nrel.gov.
    Request for Proposal PR408353 Continuous Wave Laser Welder Station
    Energy, Department Of
    The Department of Energy, through UT-Battelle, LLC, is soliciting proposals for a Continuous Wave Laser Welder Station under Request for Proposal PR408353, with offers due by December 19, 2025. The procurement aims to acquire a single unit that meets specific technical specifications outlined in the attached documents, which include detailed requirements for the laser station's components and capabilities. This equipment is crucial for advanced welding applications at the Oak Ridge National Laboratory, enhancing operational efficiency and precision in research and development projects. Interested vendors should direct inquiries to Kevin Nelson at nelsonkr@ornl.gov or Terri Cleveland at clevelandtd@ornl.gov, and ensure compliance with all proposal requirements, including representations and certifications, as detailed in the solicitation documents.
    Orbitrap Excedion Pro MS System
    Energy, Department Of
    The Department of Energy, through the Oak Ridge National Laboratory (ORNL), is seeking proposals for the procurement of an Orbitrap Excedion Pro MS System for its Biosciences Division. This advanced analytical instrument is crucial for chemical analysis and will be utilized in various laboratory applications, enhancing the laboratory's capabilities. The Request for Proposal (RFP) No. 433924 outlines specific technical requirements, compliance standards, and proposal submission guidelines, with offers due by December 18, 2025. Interested vendors should direct inquiries to Morgan Hale at halemt@ornl.gov or call 615-519-9527, and are encouraged to review the attached Bill of Materials and Terms and Conditions for further details.
    Request for Proposal PR418462 Solenoid Magnets - FY26
    Energy, Department Of
    The Department of Energy, through UT-Battelle, LLC, is soliciting proposals for the delivery of ten (10) Solenoid Stack Assemblies to support a funded project at the Oak Ridge National Laboratory (ORNL) in Tennessee. The procurement aims to acquire these assemblies based on specified technical requirements and cost-effectiveness, with detailed specifications provided in the associated documents. The Solenoid Stack Assemblies are critical components for various applications within the laboratory's research initiatives. Proposals are due by December 17, 2025, and interested parties should direct inquiries to the primary contact, Kevin Nelson, at nelsonkr@ornl.gov or by phone at 865-341-3520.
    Levante IR fs optical parametric oscillator (OPO) & Installation, No Equivalents or Substitutions
    Energy, Department Of
    The Department of Energy, through Brookhaven National Laboratory (BNL), is seeking quotes for a Levante IR fs optical parametric oscillator (OPO) and its installation, with no equivalents or substitutions allowed. The procurement aims to acquire this advanced optical instrument, which is crucial for extending the wavelength coverage of Coherent’s fs laser sources, thereby enhancing research capabilities at the laboratory. Interested vendors must provide an all-inclusive price that covers freight, tariffs, and handling fees, and must comply with specific requirements outlined in the attached terms and conditions, including insurance and SAM registration. Quotes are due by the specified deadline, and interested parties should contact Malen Valencia at mvalencia@bnl.gov for further inquiries.
    BSA RFI-PVD Tool
    Energy, Department Of
    The Department of Energy, through Brookhaven National Laboratory (BNL), is seeking information from companies regarding their capabilities to provide a magnetron sputter deposition system for quantum device fabrication. This Request for Information (RFI) outlines the need for a highly flexible, ultrahigh vacuum (UHV) system that can perform both reactive and non-reactive sputtering with precise process control, including specific requirements for components such as a UHV sputtering chamber, integrated vacuum pumping system, and a substrate stage capable of high-temperature heating. The procurement is crucial for advancing quantum technology research, and interested vendors must submit their responses electronically by 5:00 PM Eastern Time on December 24, 2025, to Aaron Hagler at ahagler@bnl.gov, with the subject line “BSA RFI-471842.”
    Electrical Steel Coils
    Energy, Department Of
    The Department of Energy, through the Fermi National Accelerator Laboratory (Fermilab), is soliciting proposals for the procurement of Non-Grain Oriented Electrical Steel (NGOES) Coils, specifically requiring a total of 35,175 pounds of this material. The NGOES is critical for the fabrication of PIP-II ORBUMP magnet cores, necessitating compliance with stringent specifications regarding chemical and magnetic properties, as outlined in the associated technical documents. Proposals must be submitted by December 23, 2025, at 1:00 PM CT, with the contract period extending through December 1, 2026. Interested vendors should direct inquiries to Sharon Duchaj at sduchaj@fnal.gov or call 630-840-8693 for further details.
    Walk-in Oven Building 128
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for the procurement of a walk-in oven for Building 128 at the Anniston Army Depot. This requirement is part of a total small business set-aside under the North American Industry Classification System Code 333994, which pertains to Industrial Process Furnace and Oven Manufacturing. The successful vendor will be responsible for delivering a product that meets the specifications outlined in the Statement of Work, which is crucial for the operational needs of the depot. Interested parties must submit their proposals electronically through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module by the closing date of January 5, 2026, at 10:00 AM CST, and all inquiries should be directed to Crystal Hodges at crystal.l.hodges8.civ@army.mil by December 15, 2025.