Optical Table
ID: 1333ND25QNB030101-1Type: Combined Synopsis/Solicitation
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

LABORATORY EQUIPMENT AND SUPPLIES (6640)

Original Source

https://sam.gov/opp/f6b816e8e5a144ce91d2ef9bdb19c097/view
Timeline
    Description

    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking quotations for the procurement of a 60" x 72" x 12" optical table to support semiconductor research under the Chips Act. This optical table will be utilized with a Super High Resolution Darkfield Scattering-Confocal Raman Microscope, which is crucial for detecting nanoparticles at low concentrations, thereby addressing global semiconductor supply chain challenges. The contractor is required to deliver the optical table, including shipping, installation, and a one-year warranty, within 60 days of order, with installation to include unpacking, setup, and demonstration. Interested vendors must submit their quotations by March 4, 2025, and direct inquiries to Jenna Bortner at jenna.bortner@nist.gov or Donald Collie at donald.collie@nist.gov, ensuring compliance with all outlined specifications and federal regulations.

    Point(s) of Contact
    Jenna Bortner
    jenna.bortner@nist.gov
    Donald Collie
    donald.collie@nist.gov
    Files
    Title
    Posted
    Amendment 1.pdf
    The Department of Commerce's National Institutes of Standards and Technology (NIST) released Amendment 0001 for RFQ Number 1333ND25QNB030101-1. This amendment addresses specific inquiries about the lab's location and project specifications, extending the response deadline to March 11, 2025, at 12:00 PM ET. The laboratory for the project is located in Building 217, Lab C112, accessible at street level without the need for an elevator. Additionally, the amendment clarifies the requirement for both passive tuned mass damping and active damping in the project. Interested parties must direct further questions and quotations via email to the designated contacts, ensuring inclusion of the Contracting Officer in all responses for consideration. This document is part of NIST's acquisition management efforts, aimed at facilitating contractor engagement for specific scientific projects.
    CSS Optical Table.pdf
    The document outlines a solicitation (RFQ) for an optical table, identified by solicitation number 1333ND25QNB030101-1, issued under simplified acquisition procedures as per FAR guidelines. It includes a request for quotations from vendors and specifies submission requirements, such as the need for registration in the System for Award Management (SAM) and completion of various certifications. The solicitation emphasizes full and open competition and outlines evaluation criteria focusing on technical capability, relevant experience, and pricing. Offerors must describe their product's technical specifications, provide evidence of prior relevant work, and submit a detailed price quotation. The due date for quotations is set for March 4, 2025. Additional provisions include Buy American requirements and restrictions against certain telecommunications equipment. The solicitation stresses communication with designated contracting officials for any inquiries, clearly emphasizing the importance of compliance with outlined specifications and submission protocols.
    Statement of Work.pdf
    The National Institute of Standards and Technology (NIST) is procuring a 60" x 72" x 12" optical table to support semiconductor research under the Chips Act. This optical table will accommodate a Super High Resolution Darkfield Scattering-Confocal Raman Microscope aimed at detecting nanoparticles at exceptionally low concentrations. The project addresses global semiconductor supply chain challenges by enhancing measurement methodologies vital for R&D in material and production methods. The contractor must deliver one new optical table, including shipping, installation, and a one-year warranty, adhering to specified technical requirements that ensure high vibration isolation and rigidity. Delivery is required within 60 days of order, with installation including unpacking, setup, and demonstration. The document outlines payment terms contingent upon successful installation and performance testing, as well as stringent cybersecurity requirements aligned with federal regulations. All contractor personnel must comply with NIST's safety and security protocols during installation. This procurement highlights NIST's commitment to advancing metrology capabilities in semiconductor manufacturing through precise infrastructure investments.
    Lifecycle
    Title
    Type
    Optical Table
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    CHIPS Enclosure
    Buyer not available
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking qualified contractors to provide laboratory equipment as part of its CHIPS program, which focuses on developing permittivity measurement standards. The procurement includes the delivery and installation of two metric optical tables, two imperial laminar flow enclosures, acrylic panels, thermoelectric chillers, and additional optical tables and frames, all of which are critical for enhancing microwave materials research. Interested offerors must submit a firm-fixed-price quotation by March 14, 2025, including a technical proposal and past performance documentation, with evaluations prioritizing technical capability over price. For further inquiries, interested parties can contact Tracy Retterer at tracy.retterer@nist.gov or Forest Crumpler at forest.crumpler@nist.gov.
    Thin-Film Lithium Niobate (TFLN) Photonic Chips
    Buyer not available
    The National Institute of Standards and Technology (NIST), part of the Department of Commerce, is seeking qualified contractors to procure Thin-Film Lithium Niobate (TFLN) photonic chips to support its research in quantum communications and networking. The procurement involves both design support and chip fabrication, requiring contractors to provide a design manual and process development kit (PDK) for custom designs, followed by the fabrication of seven chips based on approved specifications within a ten-month period post-award. This initiative is crucial for advancing NIST's capabilities in quantum technology, with deliverables expected within two weeks after fabrication and an inspection process to ensure compliance with NIST standards. Interested parties must submit their quotations by March 12, 2025, with questions accepted until March 5, 2025; for further inquiries, contact Collin Randall at collin.randall@nist.gov or Lauren P. Roller at lauren.roller@nist.gov.
    Notice of Intent To Sole Source With Evident Scientific for Repair Services and Software Upgrade for Olympus LEXT OLS4100 microscope
    Buyer not available
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to procure repair services and a software upgrade for an Olympus LEXT OLS4100 microscope, which is critical for research in graphene quantum Hall devices. Due to a recent failure, expedited service is required to resume investigations into epitaxial graphene material fabrication, and market research indicates that only Evident Scientific has the necessary capabilities, including OEM replacement parts and proprietary calibration knowledge. This sole-source acquisition is essential for maintaining the functionality of equipment vital to NIST's Quantum Measurements Division, and interested parties are invited to express their interest and capability by March 13, 2025, although no formal solicitation will be issued. For further inquiries, interested parties may contact Ranae M. Armstrong at ranae.armstrong@nist.gov or Donald Collie at donald.collie@nist.gov.
    Beamline 7 Monochromator
    Buyer not available
    The Department of Commerce, through the National Institute of Standards and Technology (NIST), is seeking information from qualified vendors regarding the procurement of a new Extreme Ultraviolet (EUV) monochromator for its Synchrotron Ultraviolet Radiation Facility (SURF III) located in Gaithersburg, Maryland. The monochromator is intended to enhance metrology services by operating effectively within the 6 nm to 35 nm wavelength range, with specific requirements for installation under ultrahigh vacuum conditions and performance metrics such as minimum resolving power and adjustable exit slits. This initiative is crucial for advancing the capabilities of metrology equipment to meet the needs of industry, academia, and government, ensuring compliance with safety standards related to radiation exposure. Interested vendors should contact Elizabeth Timberlake at elizabeth.timberlake@nist.gov for further details and are encouraged to submit their responses in accordance with the outlined guidelines, ensuring registration in the System for Award Management (SAM).
    Sources Sought Notice for EUV Reflectometer for SURF III
    Buyer not available
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for an EUV Reflectometer intended for use in laboratory settings at their facility in Gaithersburg, Maryland. This procurement aims to acquire advanced measurement instruments that will enhance precision in scientific research, focusing on specific sample orientations and detector functionalities as outlined in the associated schematic figures. The reflectometer will play a crucial role in capturing data essential for various experimental needs, emphasizing the importance of detailed engineering specifications. Interested vendors can reach out to Jenna Bortner at jenna.bortner@nist.gov or Forest Crumpler at forest.crumpler@nist.gov for further information regarding this opportunity.
    Solicitation - 25 GHz Spectrum Analyzer
    Buyer not available
    The National Institute of Standards and Technology (NIST) is seeking proposals for a 25 GHz Signal and Spectrum Analyzer to support critical frequency comb research. The procurement requires a single analyzer capable of operating within a frequency range of 10 kHz to 25 GHz, with specific performance criteria including a minimum resolution bandwidth of 1 Hz and the ability to demodulate analog AM and PM signals. This equipment is essential for advancing telecommunications research and ensuring high accuracy in microwave signal characterization. Interested vendors must submit their quotations by email by 5:00 PM MT on March 7, 2025, and can direct inquiries to Daniel Kent at daniel.kent@nist.gov or by phone at 303-497-6533.
    CMOS Cameras
    Buyer not available
    The National Institute of Standards and Technology (NIST) is soliciting quotations for the procurement of three ZWO ASI461MM Pro USB 3.0 cooled monochrome cameras, specifically targeting small businesses. These cameras are essential for NIST's neutron imaging program, offering high-resolution imaging capabilities with a 101.99 megapixel array, which is critical for maintaining spatial resolution in various imaging applications. Interested vendors must submit their proposals electronically by March 5, 2025, detailing their technical capabilities, pricing, and terms in separate volumes, with the contract awarded to the lowest-priced, technically acceptable offeror. For further inquiries, interested parties can contact Joni L. Laster at joni.laster@nist.gov or 301-975-6205.
    Holographic Particle Analyzer
    Buyer not available
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is planning to negotiate a sole-source procurement for a Holographic Particle Analyzer from Spheryx, Inc., based in New York, NY. This specialized instrument is crucial for NIST’s Bioprocess Measurement Group, which is dedicated to characterizing particle sizes and concentrations in biotherapeutics, providing comprehensive measurements of particle size and index of refraction. The xSight Particle Analyzer, capable of measuring particles in a dynamic size range of 500 nm to 10 µm, significantly enhances particle measurement capabilities in biomanufacturing and particle metrology. Interested parties that can meet the requirements may submit responses until March 7, 2025, and should contact Tish Walker at latish.walker@nist.gov for further information.
    Ferrovac UHV Wobble Sticks
    Buyer not available
    The National Institute of Standards and Technology (NIST) is seeking proposals from small businesses for the procurement of Ferrovac ultra-high vacuum (UHV) wobble sticks, essential for positioning samples and probes in its scanning probe microscopy labs. The procurement specifically requests two models of dual shaft manipulators, one with a 250 mm travel length and another with a 150 mm travel length, totaling four units, all of which must be compatible with existing laboratory equipment. Proposals must be submitted electronically by 11:00 AM Eastern Time on March 5, 2025, and will be evaluated based on technical capability and pricing, with awards going to the lowest priced, technically acceptable offer. Interested vendors can contact Joni L. Laster at joni.laster@nist.gov or 301-975-6205 for further information.
    Combined Sources Sought Notice and Notice of Intent to Sole Source for Dual-Sensor Spectroradiometers
    Buyer not available
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is issuing a Combined Sources Sought Notice and Notice of Intent to Sole Source for Dual-Sensor Spectroradiometers. This procurement aims to identify potential sources capable of providing advanced spectroradiometers that are critical for various analytical applications in laboratory settings. The equipment is essential for precise measurements in the field of analytical laboratory instrument manufacturing, which supports NIST's mission to promote innovation and industrial competitiveness. Interested vendors should reach out to Nina Lin at nina.lin@nist.gov or Tracy Retterer at Tracy.retterer@nist.gov for further information regarding this opportunity, which will take place in Gaithersburg, Maryland.