Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Overt Security Features
ID: 2031ZA25N00004Type: Special Notice
Overview

Buyer

TREASURY, DEPARTMENT OF THEBUREAU OF ENGRAVING AND PRINTINGOFFICE OF THE CHIEF PROCUREMENT OFFICERWASHINGTON, DC, 20228, USA

NAICS

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology) (541715)

PSC

GENERAL SCIENCE AND TECHNOLOGY R&D SERVICES; GENERAL SCIENCE AND TECHNOLOGY; APPLIED RESEARCH (AJ12)

Original Source

https://sam.gov/opp/935149d6e7244e59926bbd6fd6fac7cb/view
Timeline
    Description

    The Department of the Treasury's Bureau of Engraving and Printing (BEP) has issued a Request for Information (RFI) focused on gathering innovative technologies and materials for overt security features on future U.S. currency. The RFI aims to identify effective counterfeit deterrents that can be easily authenticated by the public without the need for external devices, under various lighting conditions. This initiative is crucial for enhancing the security of U.S. currency against traditional printing and digital reproduction methods. Interested parties are invited to submit preliminary samples and a brief technical description by October 9, 2025, to the designated BEP R&D lead, Kevin Ibershoff, at kevin.ibershoff@bep.gov, or Falcon Albino at falcon.albino@bep.gov. Please note that the government will not compensate for any response costs, and submitted information will assist in assessing potential requirements for future solicitations.

    Point(s) of Contact
    Kevin Ibershoff
    kevin.ibershoff@bep.gov
    Falcon Albino
    falcon.albino@bep.gov
    Files
    Title
    Posted
    2031ZA25N00004- RFI Overt Security Features.pdf
    The Department of the Treasury’s Bureau of Engraving and Printing (BEP) issued a Request for Information (RFI) aimed at gathering innovative technologies and materials for overt security features on future U.S. currency. The RFI, which does not constitute a contract solicitation, invites submissions by October 9, 2025, for technologies that provide effective counterfeit deterrence against traditional printing and digital reproduction. Respondents are encouraged to propose novel features that do not require external devices for verification and are easy for the public to authenticate under various lighting conditions. Interested parties must submit preliminary samples and a brief technical description to the designated BEP R&D lead. The government will not compensate for any response costs, and submitted information will assist in assessing potential requirements for subsequent solicitations. Respondents should avoid including proprietary information and are advised that responses will not be returned. This RFI reflects the BEP's interest in enhancing the security of U.S. currency through advanced, publicly accessible authentication methods.
    Similar Opportunities
    Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Hidden Machine-Readable Security Features
    Active
    Treasury, Department Of The
    The Bureau of Engraving and Printing (BEP) within the U.S. Department of the Treasury is issuing a Request for Information (RFI) to explore advancements in hidden machine-readable security features for U.S. currency. This initiative aims to gather insights on innovative technologies or materials that can effectively deter counterfeiting, with a focus on features that are discreet, difficult to replicate, and resilient against unauthorized duplication. The information collected will inform potential future solicitations, although this RFI does not obligate the government to award contracts or provide feedback. Interested parties are encouraged to submit preliminary samples and technical descriptions by October 9, 2025, and can reach out to Kevin Ibershoff or Falcon Albino via email for further inquiries.
    Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Device Assisted Security Features
    Active
    Treasury, Department Of The
    The Department of the Treasury's Bureau of Engraving and Printing (BEP) has issued a Request for Information (RFI) focused on researching and developing device-assisted security features for U.S. currency. The BEP is seeking innovative counterfeit deterrent technologies that are not currently available in commercial markets and can be authenticated by the public using low-cost devices, such as optical filters and cell phones. This initiative is part of the government's ongoing efforts to enhance the security of U.S. currency against counterfeiting threats. Interested parties are encouraged to submit preliminary samples and technical descriptions by October 9, 2025, and should direct inquiries to Kevin Ibershoff or Falcon Albino via their provided email addresses.
    Color Shifting Ink
    Active
    Treasury, Department Of The
    The Department of the Treasury, specifically the Bureau of Engraving and Printing (BEP), is seeking information from potential contractors capable of supplying Color Shifting, Non-heatset Intaglio Currency Ink with embedded security features for U.S. paper currency production. This Sources Sought/Request for Information (RFI) aims to identify existing materials or those requiring minor modifications that meet the BEP's production criteria, emphasizing the importance of security in currency manufacturing. Interested parties must submit their company information, capabilities, budgetary cost estimates, and a reference list of current customers by 5:00 PM Eastern Time on December 10, 2024, with the understanding that this notice does not constitute a solicitation for proposals or bids. For further inquiries, respondents can contact Jacqueline Ambala at jacqueline.ambala@bep.gov or Susan DelaCruz at susan.delacruz@bep.gov.
    Presolicitation Notice for Currency Paper
    Active
    Treasury, Department Of The
    The Bureau of Engraving and Printing (BEP), part of the U.S. Department of the Treasury, is seeking contractors for the procurement of distinctive currency paper and various security papers. The contract requires the production of both distinctive and non-distinctive banknote paper, as well as test papers, all adhering to specific material specifications and security requirements. This procurement is critical for the manufacturing of U.S. currency, ensuring compliance with the Conte Amendment, which mandates that currency paper be produced in the United States and restricts foreign ownership of suppliers. Interested contractors must demonstrate adequate manufacturing capacity and security infrastructure, and they can contact Wesley Rankins at wesley.rankins@bep.gov for further details. The timeline for responses and adherence to federal procurement regulations will be emphasized throughout the process.
    Manufacturing Connected Worker Platform Service
    Active
    Treasury, Department Of The
    The Bureau of Engraving and Printing (BEP), part of the Department of the Treasury, is seeking information from vendors regarding the development of a Manufacturing Connected Worker Platform Service aimed at enhancing workforce efficiency in manufacturing environments. The platform will be cloud-based, utilizing Amazon Web Services (AWS) GovCloud infrastructure, and is intended to facilitate knowledge sharing among employees, reduce onboarding time, and standardize production practices while ensuring compliance with cybersecurity standards. This initiative is crucial for modernizing BEP's manufacturing processes and improving overall operational effectiveness. Interested vendors must submit their responses to the Request for Information (RFI) by November 15, 2024, with inquiries directed to Paula Branch at proc.apmo.mr@irs.gov and Sharilyn Cook at sharilyn.cook@bep.gov.
    Rigging Boards
    Active
    Treasury, Department Of The
    The Department of the Treasury, Bureau of Engraving and Printing (BEP), is preparing to issue a Request for Quotes (RFQ) for the procurement of Rigging Boards, also known as press boards. These boards are essential for under-packing in press riggings on impression cylinders of high-speed, sheet-fed rotary I-10 and Super Orlof Intaglio (SOI) presses, which are used in the printing of United States currency and other security items at BEP's Eastern Currency Facility in Washington, DC, and the Western Currency Facility in Fort Worth, Texas. The solicitation is anticipated to be posted on SAM.gov by November 19, 2024, and interested parties can reach out to Susan DelaCruz at susan.delacruz@bep.gov or Jacqueline Ambala at jacqueline.ambala@bep.gov for further information.
    Rigging Boards
    Active
    Treasury, Department Of The
    The Department of the Treasury, Bureau of Engraving and Printing (BEP), is preparing to issue a Request for Quotes (RFQ) for the procurement of Rigging Boards, also known as press boards. These boards are essential for under-packing in press riggings on impression cylinders of high-speed, sheet-fed rotary I-10 and Super Orlof Intaglio (SOI) presses, which are used in the printing of United States currency and other security items at the BEP's Eastern Currency Facility in Washington, DC, and the Western Currency Facility in Fort Worth, Texas. The anticipated contract will be a Firm Fixed Price (FFP) Blanket Purchase Agreement (BPA), with the solicitation expected to be posted on SAM.gov by November 19, 2024. Interested vendors can reach out to Susan DelaCruz at susan.delacruz@bep.gov or Jacqueline Ambala at jacqueline.ambala@bep.gov for further information.
    Intent to Award Sole Source
    Active
    Treasury, Department Of The
    The Department of the Treasury, specifically the Bureau of Engraving and Printing (BEP), intends to award a sole-source contract for the acquisition of Original Equipment Manufacturer (OEM) spare parts necessary for currency manufacturing. The required spare parts, which include various components such as traction ropes, check valves, and filter elements, are proprietary to Buhler Group, and no other sources can supply these specific items. This procurement is critical as BEP lacks the capabilities to produce these parts in-house, ensuring the continuity of operations in currency production. Interested parties who believe they can provide the required spare parts must submit a capability statement by 4:00 PM EDT on November 22, 2024, to William Corley II at william.corleyII@bep.gov.
    Copper Plated Zinc Penny Planchettes
    Active
    Treasury, Department Of The
    The Department of the Treasury, specifically the United States Mint, is conducting a Sources Sought notice to identify potential suppliers for copper-plated zinc (CPZ) one-cent planchettes. The procurement aims to manufacture circulating, uncirculated, and proof CPZ planchettes, which are essential for producing coins compatible with existing currency used in vending, banking, and commerce. Interested parties are invited to submit their organizational capabilities and relevant documentation by December 31, 2024, to the primary contacts Amalee Elayyan at amalee.elayyan@usmint.treas.gov and James Bacinski at james.bacinski@usmint.treas.gov, as this market research will inform future procurement methods.
    Verification Tool - Seeking a Two-Factor Authentication (2FA) Security Method/Tool to Confirm Government Identity for Special Agents and Support-Personnel who Routinely Make Face-to-Face Contacts with the Public.
    Active
    Treasury, Department Of The
    The Department of the Treasury, specifically the Internal Revenue Service (IRS) Criminal Investigation division, is seeking information regarding a two-factor authentication (2FA) tool designed to verify the identity of Special Agents during public interactions. The objective is to enhance security and trust by allowing the public to confirm the authenticity of Special Agents through a verification process that may involve a government website and matching codes. This initiative is critical as Special Agents frequently engage with the public in sensitive situations, and a reliable verification method could significantly improve operational integrity. Interested vendors are encouraged to submit their responses to the Request for Information (RFI) by November 18, 2024, at 4:00 PM EST, and should include their contact information and proprietary data handling instructions. For further inquiries, vendors may contact Harlan Daar at harlan.daar@ci.irs.gov or Allen Pride at allen.Pride@ci.irs.gov.