Request for Information (RFI): Optimized Machining Parameters for AerMet 100
ID: FA8684-AM100Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8684 AFLCMC RODKWRIGHT PATTERSON AFB, OH, 45433-7120, USA

NAICS

Other Aircraft Parts and Auxiliary Equipment Manufacturing (336413)

PSC

SUPPORT- PROFESSIONAL: ENGINEERING/TECHNICAL (R425)

Original Source

https://sam.gov/workspace/contract/opp/e8bc5e371b80487fb95120e9a1bcc719/view
Timeline
    Description

    The Department of the Air Force is issuing a Request for Information (RFI) to gather insights on optimized machining parameters for AerMet 100, a high-strength alloy critical for aerospace applications. The objective of this RFI is to identify current industry capabilities and solutions that can enhance manufacturing efficiency, reduce waste, and ensure consistent high-quality output, particularly for landing gear components. The USAF is seeking information on company capabilities, recommended machining parameters, tooling solutions, and cost estimates, with responses due by December 22, 2025, and questions accepted until December 8, 2025. Interested parties can contact Randolph Hildebrandt Jr. at randolph.hildebrandt.2@us.af.mil or Andrew Gross at andrew.gross.4@us.af.mil for further details.

    Point(s) of Contact
    Randolph Hildebrandt Jr
    randolph.hildebrandt.2@us.af.mil
    Andrew Gross
    andrew.gross.4@us.af.mil
    Files
    Title
    Posted
    REQUEST FOR INFORMATION AerMet 100.pdf
    The United States Air Force (USAF) Rapid Sustainment Office (RSO) has issued a Request for Information (RFI) for optimized machining parameters for AerMet 100, a high-strength alloy crucial for aerospace applications. The RFI, numbered FA8684-AM100, seeks industry expertise to develop and document standardized machining parameters to address current challenges like tool wear, extended machining times, and inconsistent surface quality. The goal is to enhance manufacturing efficiency, reduce waste, and ensure high-quality output for landing gear parts and other platforms. The USAF is requesting information on company capabilities, recommended machining parameters, tooling solutions, material analysis, testing methodologies, standardization experience, collaboration potential, and cost estimates. Responses are due by December 22, 2025, with questions due by December 8, 2025.
    Lifecycle
    Title
    Type
    Request for Information (RFI): Optimized Machining Parameters for AerMet 100
    Currently viewing
    Sources Sought
    Similar Opportunities
    REQUEST FOR INFORMATION - Large Caliber Penetrators
    Buyer not available
    The Department of Defense, through the Air Force Life Cycle Management Center (AFLCMC), is conducting a Request for Information (RFI) to identify industry capabilities for developing a Large Caliber Penetrator, specifically focusing on maturing a tailkit (TK) design, development, and flight testing to demonstrate system accuracy. The initiative aims to gather insights into technological, manufacturing, and business capabilities within the industrial base to inform the development of a material solution that meets operational objectives. This procurement is critical for enhancing the USAF's munitions capabilities, particularly in GPS-denied environments, and involves the production of three to five prototypes for flight testing. Interested vendors are encouraged to submit white papers detailing their capabilities by December 12, 2025, with questions due by November 25, 2025. For further inquiries, contact Mandi Johnson at mandi.johnson.4@us.af.mil or Christy Cross at christy.cross.2@us.af.mil.
    F-100 Tube Assembly, Metal
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency, is seeking proposals for the procurement of F-100 Tube Assembly, Metal, designated as a Critical Safety Item. The requirement includes a total of 12 units, with an estimated Request for Proposal (RFP) issue date of September 5, 2025, and a close date of October 6, 2025, for delivery by December 31, 2026. This assembly is crucial for aircraft engine operations, and the government intends to negotiate with a limited number of sources, primarily RTX Corporation, due to the specialized nature of the item. Interested parties should direct inquiries to Jeremy Bryant at jeremy.bryant@us.af.mil or call 405-855-7112, and all proposals submitted within 45 days will be considered.
    Request for Information (RFI) F-15SA Diminishing Manufacturing Sources and Material Shortages (DMSMS) Analysis Tool Survey
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is conducting a Request for Information (RFI) to identify potential sources for a Diminishing Manufacturing Sources and Material Shortages (DMSMS) analysis tool for the Royal Saudi Air Force's F-15SA aircraft. The objective is to procure a system that can proactively and reactively identify DMSMS issues, recommend viable resolutions, and integrate these solutions into a software tool that will be utilized by U.S. Government Country managers supporting the RSAF. This tool is crucial for managing obsolescence, correcting technical order errors, and facilitating coordination with government engineers and Foreign Military Sales (FMS) partners. Interested contractors must submit their capability surveys detailing their experience and qualifications by December 16, 2025, to the primary contact, Anthony Brzezicki, at anthony.brzezicki.2@us.af.mil or by phone at 478-497-5532.
    HOUSING, ANTIFRICTIO
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Oklahoma City, is soliciting proposals for the procurement of "Housing, Antifriction" (NSN: 2840-00-343-7601 NZ), a critical safety item for the F100 engine. Bidders must submit quotes for both Bid A, which requires a First Article Test, and Bid B, which does not, with specific deliverables outlined for each bid type, including test plans and production units. This procurement is vital for maintaining the operational integrity of military aircraft, and the contract is not set aside for small businesses. Interested parties should note that the deadline for submitting proposals has been extended to December 8, 2025, at 3:00 PM CST, and can reach out to the primary contact, 423 SCMS Workflow, at 423scms.workflow@us.af.mil for further inquiries.
    Spares Procurement
    Buyer not available
    The Department of Defense, through the United States Air Force, is conducting market research for the procurement of "LEVER, REMOTE CONTROL" with NSN 3040-01-267-7734NZ and Part Number 4067415. This Sources Sought Synopsis aims to identify potential sources capable of manufacturing, inspecting, testing, and shipping an estimated requirement of 1,500 units, while also considering supply chain management and nonrecurring engineering costs. The procurement is crucial for maintaining operational readiness and support for Air Force equipment, and interested parties must submit a Source Approval Request (SAR) package along with business information by November 29, 2025. For further inquiries, potential vendors can contact Nathan R. Sholund at nathan.sholund@us.af.mil or Gregory Howard at gregory.howard.9@us.af.mil.
    Spares Procurement for the F100/ Lever, -Remote Control
    Buyer not available
    The Department of Defense, specifically the United States Air Force, is seeking potential sources for the procurement of "LEVER,-REMOTE CONTROL" (NSN: 3040-01-267-7735NZ, P/N: 4067419) with an estimated requirement of 1,500 units. Interested businesses must be capable of providing all necessary labor, materials, facilities, and equipment for the manufacturing, inspection, testing, preservation, packaging, and shipping of the item, as well as managing supply chain logistics and addressing nonrecurring engineering costs. This procurement is critical for maintaining operational readiness and support for Air Force operations. Responses to this Sources Sought Synopsis are due by December 29, 2025, and interested parties should contact Nathan R. Sholund at nathan.sholund@us.af.mil or Emma Taylor at emma.taylor.7@us.af.mil for further information.
    FD2030-25-01565
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is seeking suppliers for specific airframe structural components under the contract titled FD2030-25-01565. The procurement involves two National Stock Numbers (NSNs): 1560-01-522-0552FG and 1560-01-522-1614FG, with associated top drawings and revisions dated April 11, 2025, and February 21, 2023, respectively. These components are critical for the maintenance and operation of military aircraft, ensuring their reliability and performance. Interested vendors should refer to the solicitation information for further details and contact Ronald S. Ladd for inquiries once the solicitation is approved and available for quotes.
    Brake Temperature Monitoring System
    Buyer not available
    The Department of Defense, specifically the Air Force Life Cycle Management Center (AFLCMC), is conducting market research through a Request for Information (RFI) for a Fixed Wing Brake Temperature Monitoring System (BTMS). The objective is to identify potential sources capable of providing engineering services to design, install, and integrate a low-cost, non-invasive BTMS for HC/AC/MC-J aircraft, which must include digital temperature readouts and overheat alerts while being compliant with Night Vision Imagery System standards. This system is critical for enhancing aircraft safety and operational efficiency, with installation and integration expected to be completed by March 2026. Interested contractors are encouraged to respond by December 22, 2025, and should direct inquiries to Philip Earthly at philip.earthly.1@us.af.mil. Please note that this RFI is for information and planning purposes only, and the government will not reimburse any expenses incurred in response to this request.
    GEARBOX,LANDING
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Ogden, Utah, is soliciting proposals for three units of the Gearbox, Landing (NSN: 1620-00-617-9123) specifically for C-130 aircraft, primarily aimed at Foreign Military Sales (FMS) customers. The procurement emphasizes compliance with AS9100 quality standards, the Buy American Act, and various military standards for packaging and marking, including MIL-STD-130 and MIL-STD-2073-1E. This opportunity is critical for maintaining the operational readiness of military aircraft and ensuring compliance with national defense requirements. Interested contractors must submit their proposals by December 17, 2025, and can reach out to Richard Dunlap at richard.dunlap.2@us.af.mil or call 385-591-8306 for further information.
    C-130J LONGERON ASSEMBLY, FUSELAGE
    Buyer not available
    The Department of Defense, through the Department of the Air Force, is soliciting quotes for the procurement of a Longerons Assembly, Fuselage, Part Number 342986-6L, with a quantity of one unit required. This procurement is critical due to its urgency related to flight and safety deficiencies, necessitating delivery to Hill Air Force Base, Utah, by January 30, 2026. The opportunity is set aside for small businesses under the NAICS code 336412, and interested vendors must submit their quotes by December 29, 2025, while also adhering to specific instructions for accessing technical drawings and compliance with military packaging standards. For further inquiries, potential bidders can contact Brad Wood at bradley.wood.11@us.af.mil or Arthur Gumushyan at arthur.gumushyan@us.af.mil.