X-Ray Inspection System
ID: W912GY24Q0028Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK SIAD CONTR OFFHERLONG, CA, 96113-5000, USA

NAICS

Irradiation Apparatus Manufacturing (334517)

PSC

PHYSICAL PROPERTIES TESTING AND INSPECTION (6635)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/cdf3aee9761a4e8b833dba6a15b6dd60/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of an X-Ray Inspection System to be utilized at the Sierra Army Depot in Herlong, California. The system must meet specific technical requirements, including a tunnel size capable of scanning objects up to 59 inches by 70.9 inches, a conveyor system with a weight capacity of at least 1,200 kg, and advanced imaging capabilities such as HDMI connectivity and image recall for previous scans. This procurement is critical for ensuring regulatory and safety compliance in various operational contexts, with the solicitation anticipated to be released on October 1, 2024. Interested small businesses are encouraged to contact Justin Lyu at justin.y.lyu.civ@army.mil or 520-671-7843 for further details, and must be registered with the System for Award Management (SAM) to submit proposals.

    Point(s) of Contact
    Justin Lyu
    (520) 671-7843
    (530) 827-4722
    justin.y.lyu.civ@army.mil
    Tracy Worrell
    (571) 588-9463
    (530) 827-4722
    tracy.e.worrell.civ@army.mil
    Files
    Title
    Posted
    X-Ray Inspection System Specification_10 SEP 2024.docx
    The document outlines the desired specifications for an X-Ray Inspection System, aimed at supporting government procurement efforts. Key characteristics include a tunnel size capable of scanning objects up to 59 inches x 70.9 inches and a conveyor system that can handle a weight of at least 1,200 kg, with bi-directional motion controls. The system must also connect to external monitors via HDMI, offer image recall for at least 10 previous scans, and operate on a power supply of 220 VAC. Technical requirements mandate a minimum steel penetration of 28 mm and a wire resolution of at least 38 AWG. Additionally, the X-Ray generator must sustain a 100% duty cycle, ensure radiation dosage below 0.1 mR per exam, and maintain leakage under 0.5 mR per hour. This specification serves as part of a broader government request for proposals (RFP), facilitating the acquisition of advanced inspection technology necessary for regulatory and safety compliance in various operational contexts. The thorough detailing emphasizes critical performance metrics to ensure the system’s efficiency and safety in governmental operations.
    Lifecycle
    Title
    Type
    X-Ray Inspection System
    Currently viewing
    Presolicitation
    Similar Opportunities
    X-Ray Inspection System
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking sources for the procurement of an X-Ray Inspection System for the Sierra Army Depot (SIAD) in Herlong, California. The system must meet stringent specifications, including a tunnel size capable of scanning objects up to 59 inches by 70.9 inches, a conveyor that can handle a minimum weight of 1200 kg, and advanced safety features such as low radiation exposure and a steel penetration capability of at least 28 mm. This procurement is crucial for enhancing inspection processes and ensuring operational efficiency within military operations. Interested parties are encouraged to submit their company capability statements, including socioeconomic status and relevant identifiers, to the primary contact, Justin Lyu, at justin.y.lyu.civ@army.mil, as this is a Sources Sought Notice intended for market research only, with no solicitation currently available.
    X-Ray Baggage Scanner
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of an X-Ray Baggage Scanner under a combined synopsis/solicitation format. This opportunity is set aside for small businesses and aims to acquire commercial products or services that enhance security and detection capabilities. The X-Ray Baggage Scanner will play a crucial role in ensuring safety and security at various military installations and operations. Interested vendors should direct inquiries to Marketplace Support at 1.877.933.3243 or via email at MarketplaceSupport@unisonglobal.com, as proposals are being requested without a formal written solicitation being issued.
    PKAA Vehicle & Cargo X-Ray Insp System
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the procurement and installation of a Vehicle & Cargo X-Ray Inspection System at F.E. Warren Air Force Base in Wyoming. The project requires a high-capacity scanner capable of processing 120 trucks per hour, integrating advanced imaging technologies, and ensuring compliance with stringent performance metrics, including third-party certification for density and resolution. This initiative is crucial for enhancing security infrastructure and operational efficiency at military installations. Interested contractors must submit their written quotations by September 30, 2024, and direct any inquiries to SrA Kyra Niece at kyra.niece@us.af.mil or Arthur W. Makekau at arthur.makekau@us.af.mil.
    ATOS Q 12M SCANNER FOR THE WATERVLIET ARSENAL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for the procurement of an ATOS Q 12M scanner for the Watervliet Arsenal in New York. The contract encompasses the delivery, installation, and training for the scanner, which is essential for high-precision 3D scanning applications in manufacturing and engineering processes. This procurement emphasizes the integration of advanced technology while adhering to stringent environmental regulations, including compliance with hazardous waste management and pollution prevention laws. Interested small businesses must submit their proposals by October 7, 2024, and can direct inquiries to Amanda Robinson at amanda.p.robinson2.civ@army.mil or by phone at 518-266-4931.
    Weapons Generation Facility - Rapiscan ORION 920DX
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking proposals from qualified small businesses for the procurement of two RAPISCAN ORION 920DX X-ray Inspection Systems for the Weapons Generation Facility at F.E. Warren Air Force Base in Wyoming. The contractor will be responsible for furnishing, delivering, installing, and training Security Forces personnel on the operation and maintenance of the systems, which are critical for enhancing security at the facility's Entry Control Point. This procurement is a Total Small Business Set-Aside and is justified as a brand name only requirement due to specific security protocols that necessitate TSA-approved systems. Interested vendors must submit their quotes by September 23, 2024, at 11:00 AM MT, and can contact Kamary Williams at kamary.williams@us.af.mil or Lou Bustillo at marialourdes.bustillo@us.af.mil for further information.
    Semi- Preventative Maintenance Service on the X-Ray Machine and Enclosure
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command at the Corpus Christi Army Depot, is seeking sources for semi-preventative maintenance services on an X-Ray machine and enclosure. The contract requires the contractor to perform two maintenance visits per year, ensuring the X-Ray system's optimal functionality, which is critical for safety evaluations in aviation and weapons systems. Interested parties must submit their responses, including organizational details, to the Contract Specialist, Terry B. Clark, via email by 12:00 p.m. Central Standard Time on September 24, 2024. This opportunity is part of market research to determine procurement methods and may lead to small business set-asides or full and open competition.
    Panoramic X-Ray Machine
    Active
    Dept Of Defense
    The Department of Defense, specifically the Kentucky Army National Guard (KYARNG), is seeking proposals for the procurement of a new Panoramic X-Ray machine along with the associated Romexis 3D Imaging Software. This acquisition aims to enhance dental medical readiness support for service members, addressing current limitations in dental x-ray capabilities during Physical Health Assessments. The Panoramic X-Ray machine is critical for conducting comprehensive dental screenings and treatment diagnoses, ensuring that soldiers receive the necessary medical support. Interested vendors must submit their proposals by September 23, 2024, and can direct inquiries to Jeffery T. Valentine at jeffery.T.Valentine.civ@army.mil or Stephen D. Ramsey at stephen.d.ramsey4.civ@army.mil for further information.
    INDUSTRIAC S9X3000 & 450 kV CR NDT and INDUSTRIAC 3MPX002400 PM & Repair Services
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is planning to issue a service contract for maintenance and repair services related to the INDUSTRIAC S9X3000 & 450 kV CR NDT equipment located at Letterkenny Army Depot in Chambersburg, Pennsylvania, and the INDUSTRIAC 3MVX002400 X-Ray Machine at Crane Army Ammunition Activity in Indiana. The contract aims to ensure the operational readiness of these critical pieces of equipment through preventative maintenance, timely repairs, and staff training, which are essential for supporting military operations and adhering to safety standards. This procurement is a 100% Small Business Set-aside, with a solicitation number W911N2-24-R-0028 expected to be released around August 21, 2024, and proposals due by September 3, 2024. Interested parties should contact Kevin Duffy at kevin.a.duffy4.civ@army.mil for further inquiries and must be registered in the System for Award Management (SAM) to submit proposals.
    X-RAY MAINTENANCE & REPAIR SERVICES
    Active
    Dept Of Defense
    The Defense Threat Reduction Agency (DTRA) is seeking qualified service providers to deliver maintenance and repair services for Rapiscan Orion X-Ray machines, specifically models 928DX and 922DX, at its facilities in Fort Belvoir, Virginia, and Kirtland Air Force Base, New Mexico. The contractor will be responsible for providing repairs, preventative maintenance, and annual radiation certification in accordance with operational manuals and regulatory requirements. These X-Ray systems play a critical role in supporting DTRA's mission to counter weapons of mass destruction and improvised threat networks. Interested vendors should submit their capability statements, including relevant company information, to the primary contacts John E. Anderson III and Jude Osudoh by email, with responses limited to seven pages. This request is for market research purposes only and does not guarantee a contract award.
    M870A4 Semitrailer, Lowbed, Construction Equipment Transporter (SLCET) 40-Ton
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the M870A4 Semitrailer, Lowbed, Construction Equipment Transporter (SLCET) with a capacity of 40 tons. This procurement is set aside for small businesses and aims to fulfill the Army's requirements for transporting construction equipment effectively. The RFP closing date has been extended to September 23, 2024, at 1 PM EST, and interested parties should note that certain pricing details and eligibility requirements have been clarified in the associated RFP document. For further inquiries, potential bidders can contact Mike Daubenmeyer at michael.f.daubenmeyer.civ@army.mil or Danial A. Davidson at daniel.a.davidson12.civ@army.mil, with the latter also reachable by phone at 571-588-9401.