Notice of Intent to Sole Source Fourier Transfer Spectrometer Service
ID: NB686010-25-01361Type: Special Notice
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYUS

NAICS

Electronic and Precision Equipment Repair and Maintenance (811210)

PSC

MAINT/REPAIR/REBUILD OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT (J066)

Original Source

https://sam.gov/opp/c4972df1dd464ab3959f9824fe997a15/view
Timeline
    Description

    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to negotiate a sole-source contract with Bruker Scientific, LLC for maintenance services on a Fourier Transform Spectrometer (FTS) at its Boulder, Colorado facility. The contractor will be responsible for performing essential tasks such as HeNe laser alignment and interferometer re-alignment during a two-day onsite visit, ensuring the operational status of the FTS, and addressing any internal signal issues. This maintenance is crucial for obtaining accurate reflectance measurements that contribute to primary radiometric standards and solar irradiance measurements, supporting ongoing research in applied physics. Interested parties that can meet these requirements must submit their capabilities in writing to the primary contact, Lisa Stevens, at lisa.stevens@nist.gov by the specified deadline, with an estimated award date of June 30, 2025.

    Point(s) of Contact
    Lisa Stevens
    (252) 422-2097
    lisa.stevens@nist.gov
    Files
    Title
    Posted
    NB686010-25-01361 Statement of Work.pdf
    The Federal Government seeks qualified contractors to provide maintenance and re-alignment services for the Fourier Transform Spectrometer (FTS) at NIST's Boulder, CO facility. The FTS is vital for obtaining reflectance measurements for high-absorptance samples contributing to primary radiometric standards and solar irradiance measurements. The contractor will be required to perform specific tasks, including HeNe laser alignment and interferometer re-alignment, over a two-day onsite visit. Key requirements include ensuring the operational status and proper positioning of the laser, running diagnostics on the FTS, and addressing any internal signal issues. The contractor’s technicians must be trained, and they will perform work within a secure NIST environment, adhering to safety regulations and security protocols for campus access. Payments will be made after successful installation and acceptance of the completed work, with additional conditions outlined for invoicing. This initiative illustrates the government’s investment in maintaining critical scientific equipment to support ongoing research and standard development in applied physics environments.
    Similar Opportunities
    Sole Source Justification - Far-Infrared Dual Frequency Comb System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a Far-Infrared Dual Frequency Comb System through a sole source justification. This procurement aims to acquire specialized laboratory equipment and supplies that are critical for advancing research and development in precision measurement and metrology. The system is essential for various scientific applications, including spectroscopy and telecommunications, where high precision is required. Interested parties can reach out to Daniel Kent at daniel.kent@nist.gov or call 303-497-6533 for further information regarding this opportunity.
    Combined Sources Sought/Notice of Intent to Sole Source: Repair Keysight model 5227A Vector-Network-Analyzer
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to noncompetitively acquire repair services for a Keysight model 5227A Vector-Network-Analyzer. The repair is critical due to the analyzer's failure to output microwaves at certain frequencies, which hinders essential measurements for the CHIPS project, impacting the characterization of magnetic materials. Keysight Technologies is the sole provider capable of performing these repairs due to proprietary components and procedures, and the acquisition must be completed within the current fiscal year to meet project timelines. Interested parties should direct inquiries to Cielo Ibarra at cielo.ibarra@nist.gov by December 12, 2025, and responses to the notice are due by December 23, 2025, at 5:00 PM ET.
    Sources Sought Notice for Mid-IR Optical Frequency Comb
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), has issued a Sources Sought Notice for Mid-IR Optical Frequency Comb Systems to support its CHIPS Metrology Program's Grand Challenge 1. NIST requires three systems for applications in broadband spectroscopy, spectral reference databases, and new laser diagnostics in semiconductor processes, along with an additional system to fill a critical gap in long-wave infrared spectroradiometry and molecular spectroscopy for the space, defense, and satellite industries. Interested vendors are invited to provide information regarding their capabilities, including product specifications, customization options, and available services, while ensuring that proprietary information is not disclosed. Responses should be submitted via email to Forest Crumpler at forest.crumpler@nist.gov, as NIST seeks to gather market insights to inform future procurement decisions.
    Sources Sought Notice for CHIPS R&D Optical frequency comb, Control electronics
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting a Sources Sought Notice to identify potential sources for a Mid-Infrared Femtosecond Laser Source, Femtosecond Laser Control Electronics, and an Ultrastable Laser System as part of its CHIPS Metrology Program. The objective is to enhance measurement science critical to semiconductor manufacturing processes, particularly in plasma etching, by acquiring advanced optical frequency comb diagnostics. This procurement is vital for improving the correlation between reactor inputs and etching outcomes, thereby facilitating the development of next-generation plasma etching processes. Interested manufacturers are encouraged to submit their capabilities and relevant product information to Tracy Retterer at tracy.retterer@nist.gov or Donald Collie at donald.collie@nist.gov, with responses preferred before the closing date, as this notice is for market research purposes only and does not guarantee a contract award.
    Combined Sources Sought/Notice of Intent to Sole Source: Sub-THz VNA Extenders and Amplifier
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to noncompetitively acquire Sub-THz VNA extenders and a high-power amplifier to support its CHIPS program focused on high-frequency transistor characterization. The procurement includes specific requirements for WR6.5, WR5.1, and WR3.4 VNA waveguide extenders, as well as a D-band waveguide amplifier, all of which are critical for developing a unique microelectronic measurement setup essential for semiconductor testing. This equipment is vital for enhancing measurement capabilities and accelerating the development of next-generation microelectronic devices. Interested vendors must respond by December 23, 2025, with their capabilities and relevant information to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov.
    Combined Sources Sought/Notice of Intent to Sole Source: Pump Suppression Module
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to noncompetitively acquire a Pump Suppression Module essential for a new Brillouin Light Scattering (BLS) spectrometer as part of its CHIPS project. This module is critical for accurately measuring magnetic materials parameters, which directly supports advancements in magnetic random-access memories (MRAM) and enhances the semiconductor industry's product reliability and performance. The procurement is intended to be fulfilled by Light Machinery, Inc., the only vendor identified that meets the stringent specifications required for the module, including a suppression capability of at least 60 dB and high transmission rates. Interested parties must submit their responses by August 1, 2025, to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov.
    Sources Sought Notice for Continuous Wave Parametric Oscillator (CW OPO) Laser System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information regarding a Continuous Wave Parametric Oscillator (CW OPO) Laser System to fulfill specific technical requirements. The desired system must include a pump laser, signal and idler laser outputs with defined tunable ranges and power, control electronics compatible with U.S. power and Windows PCs, as well as a high-accuracy wavelength meter and stabilization controls. This procurement is crucial for advancing analytical laboratory capabilities, and interested vendors are encouraged to submit their company details, equipment specifications, and service offerings by email to Forest Crumpler at forest.crumpler@nist.gov by October 31, 2022. This notice serves as market research and does not constitute a solicitation or commitment to award a contract.
    Notice of Intent to Noncompetitively Acquire CHIPS R&D On-axis TEM tomography Holder
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), intends to noncompetitively acquire an on-axis transmission electron microscopy (TEM) tomography holder to support its CHIPS atom probe tomography project in Boulder, Colorado. This specialized equipment is crucial for analyzing wire-based specimens used in the CAMECA Invizo 6000 atom probe microscope, which plays a significant role in the characterization of materials relevant to semiconductor manufacturing. The acquisition is based on market research indicating that Fischione Instruments is the only vendor capable of providing a compatible holder that meets NIST's stringent requirements. Interested parties who believe they can fulfill these requirements are encouraged to contact Tracy Retterer at tracy.retterer@nist.gov or Forest Crumpler at forest.crumpler@nist.gov with relevant information by the specified response date.
    Optical Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of an Optical Microscope. The primary objective is to support the NIST CHIPS Metrology R&D program, which focuses on nondestructive defect detection metrology for semiconductor advanced packaging, requiring a microscope capable of various imaging modes and equipped with advanced features for precision measurements. This procurement is critical for enhancing the accuracy of defect detection in semiconductor failure analysis, with a focus on characterizing defects through precise optical measurements. Interested vendors should submit their capabilities and relevant information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, while noting that this notice does not constitute a commitment to award a contract.
    Sole Source Justification Field Emission Scanning Electron Microscope (FESEM)
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a Sole Source Field Emission Scanning Electron Microscope (FESEM) through a Justification for Other Than Full and Open Competition (JOFOC). This procurement is essential for advancing NIST's capabilities in laboratory equipment and supplies, particularly in high-resolution imaging and analysis. The justification for this sole source acquisition will be publicly available within 14 days of the contract award, and the opportunity will remain open for 30 days in accordance with federal regulations. Interested parties can reach out to Nina Lin at nina.lin@nist.gov or Forest Crumpler at forest.crumpler@nist.gov for further inquiries.