Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) Lase
ID: W911QX19Q0193Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC-APG ADELPHIADELPHI, MD, 20783-1197, USA

PSC

INSTRUMENTS AND LABORATORY EQPT (66)

Original Source

https://sam.gov/opp/958da7c54d44e2d25115e75953e3044d/view
Timeline
    Description

    Neodymium-doped Yttrium Aluminum Garnet (Nd) Laser is being procured by the DEPT OF DEFENSE, DEPT OF THE ARMY. This laser is typically used for various applications such as medical procedures, scientific research, and industrial manufacturing. The procurement notice, titled "Neodymium-doped Yttrium Aluminum Garnet (Nd) Laser," is a Combined Synopsis/Solicitation. The place of performance is at the U.S. Army Research Laboratory in ABERDEEN PROVING GROUND, MD. The solicitation number is W911QX-19-Q-0193, and the response date is five business days after posting. The laser is required to be delivered within four months after contract award. The evaluation criteria for this procurement include technical specifications, past performance, and price. For more information, contact Alberta R. Stadtler at alberta.r.stadtler.civ@mail.mil or 301-394-1080.

    Point(s) of Contact
    Alberta R. StadtlerContract Specialist
    (301) 394-1080
    alberta.r.stadtler.civ@mail.mil
    Lifecycle
    Title
    Type
    Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) Lase
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Maintenance and Repair Services on the Candela VBeam Perfecta Laser
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking maintenance and repair services for the Candela VBeam Perfecta Laser, with the procurement managed by the W40M MRCO PACIFIC office. This opportunity is categorized as a sole source justification, indicating that the services are required for specialized medical, dental, and veterinary equipment, which is crucial for maintaining operational readiness and effectiveness in medical facilities. The place of performance for this contract is located in Fairbanks, Alaska, and interested parties can reach out to Tina Koike at tina.w.koike.civ@health.mil or by phone at 808-438-5131 for further details. The specific funding amount and key deadlines have not been disclosed in the available information.
    Advanced Laser Services VA Loma Linda HealthCare Systems
    Veterans Affairs, Department Of
    The Department of Veterans Affairs is seeking qualified vendors to provide Advanced Laser Services for the VA Loma Linda Health Care System in California. The procurement aims to identify Service-Disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, and other small businesses capable of supplying KTP/CO2/VBeam laser services, including the provision and maintenance of laser equipment, trained technicians, and emergency service availability. This initiative is crucial for supporting surgical procedures within the healthcare system, ensuring high-quality patient care. Interested parties must submit a capabilities statement by December 23, 2025, and should be registered in the System for Award Management (SAM) and, if applicable, the Department of Veterans Affairs Center for Veterans Enterprise VetBiz Registry. For further inquiries, contact Jordan Alonzo at jordan.alonzo@va.gov or call 505-767-6094.
    W065--SURGERY LASER SERVICES
    Veterans Affairs, Department Of
    The Department of Veterans Affairs, specifically the Network Contracting Office 15, is seeking qualified businesses to provide Surgical Laser Services at the Kansas City VA Medical Center. The procurement aims to secure comprehensive surgical laser support, including the provision of various laser equipment, accessories, and qualified technician services on an as-needed basis over a five-year ordering period. Surgical lasers are critical for precision ablation in complex surgical procedures, and the required equipment includes systems such as the Lumenis Pulse 120H Holmium Laser and several CO₂ laser systems, among others. Interested firms must respond in writing with their capabilities and are required to be registered in SAM.gov, comply with the Buy American statute, and provide an authorized service provider letter from the OEM. For further inquiries, contact Betty Flores at veronica.flores@va.gov or call 913-946-1167.
    Production Capabilities to produce Advanced Multi-Purpose (AMP) Eye safe Laser Range Finder (ELRFs)
    Dept Of Defense
    The Department of Defense, through the U.S. Army Contracting Command – Detroit Arsenal (ACC-DTA), is conducting a market survey to identify potential sources for the production of 20 Advanced Multi-Purpose (AMP) Eye-safe Laser Range Finders (ELRFs) intended for the M1A2T Abrams Tank. This opportunity seeks manufacturers with relevant experience and capabilities to produce these specialized devices, emphasizing the need for detailed capability statements that outline production processes, quality verification, and past performance. The AMP ELRFs are critical for enhancing the operational effectiveness of the Abrams Tank, ensuring precision and safety in various combat scenarios. Interested parties are encouraged to submit their tailored capability statements via email to Terrie D. Legette within 60 days of the notice, as this is a request for information only and not a solicitation for a contract.
    NDT Modernization
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command-Rock Island, is seeking proposals from qualified small businesses for the modernization of Non-Destructive Testing (NDT) systems at the Rock Island Arsenal. The procurement aims to enhance the capabilities of the NDT lab through the installation of new linear accelerators and X-ray tubes, while ensuring compliance with national safety standards such as OSHA, ASTM, and ANSI. This modernization is critical for maintaining operational efficiency and readiness within the Joint Manufacturing and Technology Center (RIAJMTC). Interested vendors must submit their bids by December 20, 2024, and can direct inquiries to Brandy Huesmann at brandy.m.huesmann.civ@army.mil or Ashley Moore at ashley.m.moore85.civ@army.mil.
    Interferometry Laser - Combined Sources Sought Notice and Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is conducting a sources sought notice for a tunable laser, specifically a 780 nm laser, as part of its CHIPS R&D Program. The laser is required for mass sensing experiments related to atomic layer deposition processes critical in semiconductor manufacturing, aiming to enhance measurement capabilities and optimize fabrication yields. NIST intends to issue a sole source award to Toptica Photonics Inc if no other capable sources are identified, with responses due to the primary contact, Nina Lin, at nina.lin@nist.gov. This procurement is essential for meeting project milestones by early FY26, and interested parties are encouraged to respond with detailed capabilities and specifications.
    Handheld X-Ray Fluorescence for ERDC GSL
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army's Engineer Research and Development Center (ERDC), is seeking quotes for a Handheld X-Ray Fluorescence (XRF) device designed for detecting elemental concentrations in soils and sediment deposits. The procurement requires a lightweight and compact device with specific technical specifications, including a Gold anode, a Silicon Drift Detector, and capabilities for data analysis and report generation. This equipment is crucial for environmental assessments and material analysis, ensuring accurate and efficient data collection in the field. Interested vendors must submit their offers by December 3, 2025, to the designated contacts, Angela Stokes and David Ammermann, with delivery expected by March 16, 2026, to Vicksburg, Mississippi.
    Raman Spectrometer
    Energy, Department Of
    The Department of Energy's National Renewable Energy Laboratory (NREL) is seeking proposals for the procurement of a high-resolution Raman Spectrometer, aimed at enhancing its energy systems research capabilities. This solicitation, identified as RFQ Number 2026027058, requires a fully integrated confocal Raman microscope with specific technical specifications, including multiple gratings, a multichannel CCD detector, and high-temperature reaction capabilities, among others. The Raman Spectrometer is crucial for analyzing the phase and molecular structure of catalysts, which is essential for the development of advanced catalytic materials. Proposals are due by January 2, 2026, at 5 PM Mountain Time, and interested vendors must ensure their submissions include all required documentation, including SAM registration and compliance with the Buy American Act. For further inquiries, potential offerors can contact Janelle DiGregorio at Janelle.DiGregorio@nrel.gov.
    H999--Laser Safety Officer Base 4 Option Years Small Business Set-Aside
    Veterans Affairs, Department Of
    The Department of Veterans Affairs is seeking a qualified contractor to provide Laser Safety Officer (LSO) services for the Eastern Colorado VA Healthcare System and the PFC Floyd K. Lindstrom VA Clinic. This procurement is a small business set-aside Request for Quote (RFQ) that requires a Certified Medical Laser Safety Officer (CMLSO) to manage laser hazards, conduct safety evaluations, provide staff education, and ensure compliance with relevant regulations, including ANSI Z136.3-2005 standards. The contract includes a base year and four option years, emphasizing the importance of maintaining safety protocols in healthcare environments. Quotes are due by December 26, 2025, and should be submitted via email to Jeremy Ferrer at jeremy.ferrer@va.gov, with evaluations based on technical capability, past performance, and price.
    Sources Sought Notice for Continuous Wave Parametric Oscillator (CW OPO) Laser System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information regarding a Continuous Wave Parametric Oscillator (CW OPO) Laser System to fulfill specific technical requirements. The desired system must include a pump laser, signal and idler laser outputs with defined tunable ranges and power, control electronics compatible with U.S. power and Windows PCs, as well as a high-accuracy wavelength meter and stabilization controls. This procurement is crucial for advancing analytical laboratory capabilities, and interested vendors are encouraged to submit their company details, equipment specifications, and service offerings by email to Forest Crumpler at forest.crumpler@nist.gov by October 31, 2022. This notice serves as market research and does not constitute a solicitation or commitment to award a contract.