Custom Silicon Carbide Transistors
ID: NIST-FY25-CHIPS-0095Type: Sources Sought
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

COMBINATION AND MISCELLANEOUS INSTRUMENTS (6695)

Original Source

https://sam.gov/opp/9c518032e6c04acf9ddf588fedc387fe/view
Timeline
    Description

    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking responses for the design and fabrication of custom silicon carbide transistors on pre-diced 5 x 5 mm² substrates. The primary objective is to develop transistors that will enhance research into quantum-based magnetic field sensors, specifically aimed at improving SWAP-C optimization across various applications. The transistors must be fabricated using NIST-provided substrates and adhere to strict specifications, including the ability to withstand a voltage of 20 V for 10 minutes without failure. Interested parties should direct their inquiries to Cielo Ibarra at cielo.ibarra@nist.gov, with questions due by July 21, 2025. This notice is a sources sought notice and does not constitute a request for proposals or a commitment to award a contract.

    Point(s) of Contact
    Cielo Ibarra
    cielo.ibarra@nist.gov
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Custom Silicon Carbide Transistors
    Currently viewing
    Sources Sought
    Similar Opportunities
    Custom Magneto-resistive Sensors
    Commerce, Department Of
    The National Institute of Standards and Technology (NIST) is seeking responses to a Sources Sought Notice for the fabrication of custom magneto-resistive sensors. These sensors are intended for use in a scanning magnetic microscope being developed for the CHIPS Metrology Project, specifically for acquiring 3D thermal images in semiconductor packages. The procurement requires sensors that meet specific technical specifications, including a frequency range from DC to 100 kHz, field sensitivity parameters, and operational conditions, with a minimum delivery of 100 sensors. Interested parties should respond to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov, with their capabilities and relevant experience by the deadline of December 12, 2025, for any questions regarding the notice.
    CHIPS R&D Electrical/thermal TEM holder – Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a specialized electrical/thermal transmission electron microscope (TEM) holder system and compatible microelectromechanical system (MEMS)-based chips for advanced semiconductor research. This procurement aims to enhance measurement capabilities critical for evaluating the readiness of next-generation semiconductors by detecting early-stage indicators of material degradation and device failure under operational conditions. The TEM holder and associated equipment will support NIST's mission to improve manufacturing processes and assess advanced materials in semiconductor production, particularly focusing on two-dimensional and wide bandgap semiconductors. Interested vendors should respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Probes
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice for the procurement of five 220 GHz on-wafer probes to support its CHIPS program. The probes are essential for manufacturing on-wafer standards for S-parameters and power measurements up to 330 GHz, with the goal of providing known permittivity measurements for on-wafer traceability. Interested vendors are encouraged to submit their capabilities and relevant product information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, as this notice is for market research purposes and does not constitute a commitment to award a contract.
    Motorized Positioners
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking responses to a Sources Sought notice for the procurement of motorized positioners to enhance their wafer probing systems. The specific requirements include two motorized linear translation stages: one horizontal with a travel range of at least 75 mm and a minimum incremental movement of 20 nm, and one vertical with a travel range of at least 20 mm, also with a minimum incremental movement of 20 nm. These positioners are critical for characterizing high-frequency microelectronic devices under the CHIPS Act program, supporting advancements in semiconductor technology. Interested vendors should submit their responses, including company details and capabilities, to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov, by the deadline for questions on December 12, 2025. This notice is for market research purposes only and does not constitute a request for proposals or a commitment to award a contract.
    Combined Sources Sought/Notice of Intent to Sole Source: Sub-THz VNA Extenders and Amplifier
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to noncompetitively acquire Sub-THz VNA extenders and a high-power amplifier to support its CHIPS program focused on high-frequency transistor characterization. The procurement includes specific requirements for WR6.5, WR5.1, and WR3.4 VNA waveguide extenders, as well as a D-band waveguide amplifier, all of which are critical for developing a unique microelectronic measurement setup essential for semiconductor testing. This equipment is vital for enhancing measurement capabilities and accelerating the development of next-generation microelectronic devices. Interested vendors must respond by December 23, 2025, with their capabilities and relevant information to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov.
    Sources Sought Notice for CHIPS R&D Data Acquisition System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice for a Data Acquisition System (DAQ) to support its CHIPS Metrology program. This procurement aims to identify potential sources capable of providing a DAQ system that can measure resistance and temperature changes in advanced packaging materials during accelerated aging experiments, which are critical for assessing the long-term reliability of semiconductor chips. The DAQ system will play a vital role in enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, ultimately contributing to improved design efficiency and cost savings. Interested manufacturers should respond with detailed information about their products and capabilities to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Sources Sought Notice for CHIPS R&D Optical frequency comb, Control electronics
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is conducting a Sources Sought Notice to identify potential sources for a Mid-Infrared Femtosecond Laser Source, Femtosecond Laser Control Electronics, and an Ultrastable Laser System as part of its CHIPS Metrology Program. The objective is to enhance measurement science critical to semiconductor manufacturing processes, particularly in plasma etching, by acquiring advanced optical frequency comb diagnostics. This procurement is vital for improving the correlation between reactor inputs and etching outcomes, thereby facilitating the development of next-generation plasma etching processes. Interested manufacturers are encouraged to submit their capabilities and relevant product information to Tracy Retterer at tracy.retterer@nist.gov or Donald Collie at donald.collie@nist.gov, with responses preferred before the closing date, as this notice is for market research purposes only and does not guarantee a contract award.
    Sources Sought Notice for two (2) CMOS Cameras
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking potential sources for two scientific CMOS cameras through a sources sought notice (NIST-SS26-CHIPS-24). These cameras are integral to the Digital Twins for Atomic Layer Deposition Processes Project, aimed at developing and validating digital twin models for atomic layer deposition processes by enabling high-sensitivity and high-speed absorption tomographic measurements. Key technical specifications include a back-illuminated scientific CMOS sensor, high quantum efficiency, global shutter capability, and a minimum frame readout rate of 100 frames per second. Interested vendors should submit their responses, including company information and product details, by December 15, 2025, to Elizabeth Timberlake at elizabeth.timberlake@nist.gov or Donald Collie at donald.collie@nist.gov, with submissions not exceeding 20 pages.
    Atomic Force Microscope for use in a Scanning Electron Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a compact Atomic Force Microscope (AFM) intended for use in conjunction with a Scanning Electron Microscope (SEM). This procurement is part of the CHIPS Act initiative aimed at enhancing metrology research and development to support semiconductor manufacturing, with a focus on improving device reliability through advanced measurement technologies. The AFM will facilitate live imaging and analysis of two-dimensional materials, crucial for understanding device performance and failure mechanisms, thereby streamlining the fabrication and optimization processes for next-generation semiconductor devices. Interested vendors should contact Cielo Ibarra at cielo.ibarra@nist.gov and submit their responses by the specified deadlines, ensuring they include relevant company information and capabilities.
    CHIPS R&D: Extreme Thermal Cycling Chamber– Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Extreme Thermal Cycling Chamber to support its CHIPS Metrology program, which focuses on the reliability of materials used in advanced semiconductor packaging. The chamber must meet specific technical requirements, including a temperature range of -100 °C to 200 °C and a cycling rate of at least 70 °C/min, to facilitate accelerated aging experiments on polymeric components. This procurement is critical for enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, and interested vendors are encouraged to respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.