Materials and services for the installation and replacement of the engine on our 92-year-old motor yacht, “Hiawatha."
ID: 19TU4625Q1003Type: Solicitation
Overview

Buyer

STATE, DEPARTMENT OFSTATE, DEPARTMENT OFAMERICAN CONSULATE ISTANBULWASHINGTON, DC, 20520, USA

NAICS

Ship and Boat Building (3366)

PSC

DIESEL ENGINES AND COMPONENTS (2815)

Original Source

https://sam.gov/opp/c2033317f3234cbabd053def5d376610/view
Timeline
    Description

    The U.S. Department of State, through the American Consulate General in Istanbul, is seeking qualified contractors to provide materials and services for the installation and replacement of the engine on the historic motor yacht "Hiawatha," which is 92 years old. The procurement requires vendors to offer engines from approved brands—Cummins, John Deere, or Yanmar—specifically with a 250HP capacity, along with comprehensive services including engine removal, installation, and restoration work. This initiative is crucial for maintaining the yacht as a functional and historical asset, emphasizing the need for skilled labor familiar with marine heritage restoration practices. Interested parties must submit their bids by February 14, 2025, following a site visit scheduled for February 10, 2025, and can direct inquiries to the Acquisitions Office at Istanbul-Procurement@state.gov or by phone at +90 212 335 9079.

    Point(s) of Contact
    American Consulate General Istanbul Acquisitions Office
    902123359079
    Istanbul-Procurement@state.gov
    Files
    Title
    Posted
    Haiwatha new Pre solicitation.pdf
    Material and Services for the istalltion and replacement of the engine on our 92-year old motor yacht Hiawatha.pdf
    The U.S. Consulate General in Istanbul is seeking qualified contractors to provide materials and services for the installation and replacement of the engine on the historic motor yacht "Hiawatha." The solicitation, numbered 19TU4625Q1003, invites interested vendors to offer engines from approved brands (Cummins, John Deere, or Yanmar) with a focus on a 250HP capacity. The contract will be awarded based on the Lowest-Priced, Technically Acceptable evaluation approach. Requirements include engine removal, supply and installation of the new engine, thorough restoration work, and comprehensive logistical services. Key aspects include compliance with local regulations, a minimum two-year warranty, and the necessity for descriptive literature to validate offers. A site visit is scheduled for February 10, 2025, with bids due by February 14, 2025. Additionally, the contractor must be capable of adhering to U.S. and Turkish import/export laws. The contract aims to ensure the vessel remains a functional and historical asset, requiring a skilled labor force familiar with marine heritage restoration practices. This RFQ reflects the government's commitment to preserving its assets while adhering to federal procurement standards.
    Similar Opportunities
    MARITIME SECURITY CUTTER LARGE (WMSL) 418' PROPULSION (SSN: 70Z08525WMSLSHAFT Amended)
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking proposals for the refurbishment of propulsion shafts used on the 418' Maritime Security Cutter Large (WMSL). The procurement involves a sole-source requirement for the Original Equipment Manufacturer, Rolls-Royce Marine North America, to perform inspection, overhaul, testing, preservation, packaging, and marking of various propulsion shaft components. This contract is critical for maintaining the operational readiness of the WMSL cutters, which are essential for maritime security operations. Interested vendors must submit their proposals by December 19, 2025, at 12:00 PM (EST), and can direct inquiries to William Zittle or Kiya Plummer-Dantzler via the provided contact information.
    CYLINDER- HEAD, DIESEL ENGINE
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard's Surface Forces Logistics Center (SFLC), is seeking quotes for the procurement of diesel engine components, including 16 cylinder heads and 2 parts kits, from Caterpillar Defense. This unrestricted Request for Quote (RFQ) 70Z08526Q30007B00 requires vendors to provide brand-name items, with no substitutions permitted without prior approval from USCG technical experts. The components are critical for maintaining the operational readiness of Coast Guard vessels, and the selected vendor must ensure delivery by January 8, 2026, with quotes due by December 22, 2025, at 12 PM EST. Interested vendors must be registered in SAM.gov and include shipping costs to Baltimore, MD, with payments processed through IPP.gov on a NET 30 basis. For further inquiries, contact Gina Baran at gina.m.baran@uscg.mil or call 571-610-0488.
    ACTUATOR,GOVERNOR
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is soliciting quotations for the inspection, repair, and potential overhaul of a Woodward Inc. engine generator regulator used on the CGC Polar Star. Bidders are required to submit a firm fixed price quote that includes inspection fees and shipping, adhering to OEM procedures and quality assurance standards, with the contract awarded to the lowest-priced, technically acceptable offeror. This procurement is critical for maintaining the operational readiness of the Coast Guard's fleet, ensuring that essential equipment is functioning reliably. Quotes are due by December 19, 2026, at 11:00 am EST, and interested parties should direct any questions to Stephanie Garity at stephanie.a.garity@uscg.mil by December 19, 2025.
    52000QR260001486 USCGC JOHN WITHERSPOON HULL CLEANING AND ZINC RENEWAL
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified small businesses to provide underwater hull inspection, cleaning, and zinc renewal services for the CGC JOHN WITHERSPOON. The procurement requires trained personnel to conduct thorough inspections and cleaning of the vessel's hull, coating system, and associated components, along with the replacement of zinc anodes, including 12 additional stern tube zincs not covered in standard procedures. This maintenance is critical for ensuring the operational readiness and longevity of the vessel and is scheduled to take place between February 10 and March 10, 2026, at USCG Base Ketchikan, Alaska. Interested vendors must submit their quotes by January 8, 2025, and can reach out to the primary contacts, Timothy Ford and Joshua Miller, via email for further inquiries.
    WORK BOAT MEDIUM-1 (WBM-1) PROPELLER AND SHAFT SEAL REPLACEMENT
    Dept Of Defense
    The Department of Defense, through the NAVSUP Fleet Logistics Center Yokosuka, is soliciting proposals for the Work Boat Medium-1 (WBM-1) Propeller and Shaft Seal Replacement project, scheduled for February 1 to February 28, 2026, at Yokosuka Naval Base, Japan. This contract involves the replacement of the port and starboard propellers and the port shaft seal on the WBM-1 work boat, which is critical for supporting Commander, Fleet Activities Yokosuka's port operations. Contractors must adhere to strict safety and engineering standards, providing all necessary labor and materials while ensuring compliance with occupational health and security requirements. Interested firms must submit their proposals by December 22, 2025, and can request access to detailed work specifications via email by December 16, 2025. For further inquiries, contact Kazuya Iwanaga at kazuya.iwanaga.ln@us.navy.mil or Neil Flint at neil.s.flint.civ@us.navy.mil.
    ENGINE, DIESEL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the repair of diesel engines under the title "ENGINE, DIESEL." The procurement aims to secure a contractor capable of meeting a Repair Turnaround Time (RTAT) of 239 days, with all repair work adhering to specified quality standards and operational requirements. These diesel engines are critical components for various military applications, emphasizing the importance of timely and effective repair services. Interested contractors should submit their quotes, including pricing and RTAT details, to Kristen Wardecker at KRISTEN.L.WARDECKER.CIV@US.NAVY.MIL by the specified deadline, with further inquiries directed to the provided contact number.
    DRYDOCK: USCGC SEA HORSE DD FY2026
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors for the drydock repairs of the USCGC SEA HORSE (WPB-87361) scheduled for fiscal year 2026. The procurement involves comprehensive maintenance tasks, including hull preservation, propulsion system maintenance, and electrical inspections, with a total of 48 specific work items outlined in the solicitation. These repairs are critical for ensuring the operational readiness and safety of the vessel, which plays a vital role in the Coast Guard's mission. Interested small businesses must submit their offers by December 15, 2025, and can direct inquiries to Maggie Trader at Maggie.L.Trader@uscg.mil or LaToya Sorrell at Latoya.N.Sorrell@uscg.mil for further information.
    MAIN PROPULSION DIESEL ENGINE FGRR CLASS MAINTENANCE
    Dept Of Defense
    The Department of Defense, specifically the Military Sealift Command (MSC) Norfolk, is seeking technical services and industrial support for the maintenance of Main Propulsion Diesel Engines (MPDEs) on various T-EPF Class vessels, including the USNS TRENTON, USNS YUMA, and USNS NEWPORT. The procurement involves conducting scheduled maintenance, including 4,000-hour and 12,000-hour services, as well as a five-year replacement of critical components such as fuel oil and lube oil hoses, all to be performed by OEM authorized technicians in accordance with established procedures. This maintenance is crucial for ensuring the operational readiness and safety of the vessels, as the specialized design of the engines necessitates the use of OEM parts and services to maintain compliance with safety and performance standards. Quotes are due by December 16, 2025, at 4:00 PM, and interested vendors should contact Matias Parker at matias.l.parker.civ@us.navy.mil for further details.
    Inland River Towboat
    Dept Of Defense
    The U.S. Army Corps of Engineers - St. Paul District is seeking to procure a commercial off-the-shelf (COTS) inland river towboat, either new or used (1990 or newer), to support operations on the Upper Mississippi River. The vessel must meet specific requirements, including a draft of no more than 8 ft 6 in, a power range of 1,200 to 3,000 BHP (with a preference for 1,800 - 2,000 for new builds), and accommodations for at least four crew members, including a head, shower, and galley area. This procurement is crucial for maintaining operational efficiency on the river, and the contract will be awarded based on the Best Value approach. Interested vendors must submit their offers through the PIEE Module, and for further inquiries, they can contact John Riederer at John.P.Riederer@usace.army.mil or call 651-290-5614.
    open inspect and report CORE ASSEMBLY,FLUID
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors to perform the opening, inspection, reporting, and overhaul of two Core Assembly Fluid units, identified by stock number 4420-01-496-9702 and part number N03877. The procurement requires the use of genuine parts from American Precision Industries Inc. and mandates a thorough refurbishment process to restore the units to their original operating specifications, including pressure and production tests to ensure performance. Interested vendors must submit their quotes by November 24, 2025, to Eric Goldstein at Eric.I.Goldstein@uscg.mil, with the total estimated cost for the overhaul not to exceed $21,080, and compliance with various federal regulations and certifications is required.