Sources Sought Manual Hydraulic Compression Press REPOSTED
ID: W31P4Q-25-R-0008AType: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC-RSAREDSTONE ARSENAL, AL, 35898-5090, USA

NAICS

Machine Tool Manufacturing (333517)

PSC

EQUIPMENT AND MATERIALS TESTING- GUIDED MISSILES (H214)
Timeline
  1. 1
    Posted Oct 28, 2024, 12:00 AM UTC
  2. 2
    Updated Oct 28, 2024, 12:00 AM UTC
  3. 3
    Due Nov 6, 2024, 9:00 PM UTC
Description

The Department of Defense, specifically the U.S. Army, is seeking information from potential contractors regarding the procurement of two manual hydraulic compression presses, as outlined in their Sources Sought notice. The required presses must have a capacity of 30 tons, feature heated platens with a minimum heating capability of 500°F, and include specific dimensions and operational features to facilitate the fabrication of precision compression-molded components. This procurement is critical for the U.S. Army Combat Capabilities Development Command (DEVCOM) Aviation and Missile Center at Redstone Arsenal, AL, as it supports their operational capabilities. Interested parties are encouraged to submit white papers by 3:00 PM CST on November 6, 2024, to Mr. Jeffery Hestley at jeffery.d.hestley.civ@army.mil, ensuring they include the RFI/Sources Sought number W31P4Q-25-R-0008A in their submissions.

Point(s) of Contact
Files
No associated files provided.
Lifecycle
Title
Type
Sources Sought
Similar Opportunities
2000 Ton Press Brake
Buyer not available
The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is preparing to solicit proposals for the procurement of a 2000 Ton Press Brake, with contract completion required within 365 days post-award for the Puget Sound Naval Shipyard in Bremerton, Washington. This procurement will encompass a complete technical data package, including design, lubrication, supplies, site visit, labor requirements, tooling, training, and installation services. The 2000 Ton Press Brake is critical for metal fabrication processes, underscoring its importance in supporting naval operations. Interested vendors should note that the solicitation, anticipated to be issued around May 1, 2025, will be available on the DLA DIBBS website, and inquiries can be directed to Orvella G. McWilliams at orvella.mcwilliams@dla.mil or by phone at 804-279-3738.
Macrodyne Hydraulic Press Maintenance
Buyer not available
The Department of Defense, specifically the Department of the Army, is soliciting proposals for on-site preventive maintenance and emergency repair services for Macrodyne Hydraulic Press machines located at the Anniston Army Depot (ANAD). The procurement includes unlimited emergency repair and replacement parts, with the work to be performed in accordance with the Statement of Work, and is intended to be sole sourced to Macrodyne Technologies Inc. This maintenance is crucial for ensuring the operational efficiency of metalworking machinery, which plays a significant role in defense manufacturing processes. Proposals must be submitted electronically by Monday, April 28, 2025, at 10:00 AM CST, and interested vendors can access the solicitation and any amendments via the SAM.gov website. For further inquiries, contact Crystal Hodges at 256-240-3614 or via email at crystal.l.hodges8.civ@army.mil.
Three Cincinnati 750 AF10, CNC Press Brake
Buyer not available
The Department of Defense, through the Defense Logistics Agency (DLA) Aviation, is seeking proposals for the procurement of three Cincinnati 750 AF10 CNC Press Brakes, with a contract completion deadline of 365 days post-award. These machines are essential for operations at Naval Base Kitsap-Bangor in Silverdale, WA; Trident Refit Facility in King Bay, GA; and Norfolk Naval Shipyard in Portsmouth, VA, and will include tooling, installation, training, and other associated services. The solicitation, anticipated to be issued around May 1, 2025, will follow FAR 13.5 procedures and result in a Firm, Fixed Price Contract. Interested contractors can contact Orvella G. McWilliams at orvella.mcwilliams@dla.mil or by phone at 804-279-3738 for further details, and the solicitation will be available on the DLA DIBBS website.
DOLLY JACK (4 TON)(10 TON)
Buyer not available
The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal (ACC-DTA), is seeking proposals for a five-year Firm-Fixed Price Requirements contract for the procurement of dolly jacks, including an estimated 450 units of the 4-ton model and 1,350 units of the 10-ton model. This solicitation is reserved for small businesses under the Total Small Business Set-Aside program and aims to provide essential hydraulic lifting equipment for military operations. Interested contractors must submit their proposals electronically by 5:00 PM on May 22, 2025, to Clarissa Dixon at clarissa.n.dixon.civ@army.mil, ensuring compliance with all specified requirements and regulations outlined in the solicitation documents.
Purchase of the PULLER HYDRAULIC SH
Buyer not available
The Department of Defense, specifically the Department of the Army, is seeking proposals for the purchase of a PULLER, HYDRAULIC SH, as outlined in the presolicitation notice W58RGZ-25-Q-0007. The contractor will be responsible for providing all necessary services, facilities, labor, parts, materials, equipment, tools, and data to fulfill this requirement, with an estimated one-time buy of a maximum of three units. This hydraulic puller is a critical tool in military operations, emphasizing the importance of reliable and efficient equipment in maintaining operational readiness. Interested vendors should note that the closing response date is 15 days after the posting date, and they can reach out to the primary contact, Maryssa Sanchez, at maryssa.d.sanchez.civ@army.mil or the secondary contact, Edward A. Peterson, at edward.a.peterson4.civ@army.mil for further inquiries.
COMPRESSOR UNIT, REC
Buyer not available
The Department of Defense, specifically the Department of the Army, is seeking to establish a five-year Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contract for the procurement of Compressor Units, specifically the Calibration M-D6 System, with a minimum of 200 units and a maximum of 350 units to be delivered to Fort Bliss, Texas. This procurement is classified as other than full and open competition, with the contract restricted to Transdigm Inc. due to the lack of suitable technical data and government data rights necessary for alternative sources. Interested vendors must meet prequalification requirements and submit a Source Approval Request (SAR) package for review, with the solicitation expected to be issued around May 27, 2025. For further inquiries, interested parties should contact Tamela Riggs-Holman at tamela.d.riggs-holman.civ@army.mil.
Procurement of Multiple Fluke Units
Buyer not available
The Department of Defense, specifically the U.S. Army Contracting Command-Redstone, is seeking to procure specialized metrology equipment for the Army’s Primary Standards Laboratory located at Redstone Arsenal, Alabama. The procurement includes two Model 9114-256 Metrology Furnaces, one Model 9117-256 Annealing Furnace, one Model 7381-26 Deep-Well Compact Bath, and one 2019-DCB Liquid-in-Glass Thermometer Calibration Kit or equivalent, which are essential for maintaining and upgrading the Army's testing and measurement capabilities. This initiative is part of a systematic approach to enhance the U.S. Army's metrology and diagnostic equipment infrastructure. Interested parties are encouraged to respond to the Request for Information by April 30, 2025, and should direct their submissions to the designated contacts, Taylor Siskoff and Portia Sampson, via the provided email addresses.
Manifold Hydraulics, NSN: 4730-01-422-2572
Buyer not available
The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal, is soliciting proposals for a firm fixed price contract to supply a Manifold, Hydraulics, under National Stock Number (NSN): 4730-01-422-2572. This procurement is aimed at securing 15 units of the hydraulic manifold, which is critical for recovery vehicle operations, with a sole-source award anticipated to Pall Aerospower Corporation. Interested contractors must submit their signed proposals by May 1, 2025, and ensure compliance with export control regulations, as access to the technical data package requires Joint Certification Program (JCP) certification. For further inquiries, potential bidders can contact Kerri Ginter at kerri.e.ginter.civ@army.mil.
Coordinate Measurement Machine (CMM) Upgrade
Buyer not available
The Department of Defense, specifically the U.S. Army Contracting Command-Redstone, is seeking information regarding the upgrade of a Coordinate Measurement Machine (CMM) to enhance the capabilities of the U.S. Army Test, Measurement, and Diagnostic Equipment Activity (USATA). The upgrade requirements include a B5 Controller Upgrade Package with a one-year warranty, 12 months of Quindos Software or equivalent, and two HP Z4 PC models or equivalent, aimed at improving the measurement of physical objects using a probe. This Request for Information (RFI) is intended for market research purposes only and does not constitute a commitment to issue a Request for Proposal (RFP). Interested parties are encouraged to submit a white paper by April 30, 2025, detailing their capabilities, formatted in Microsoft Word and limited to three pages, with specific company information included. For further inquiries, respondents may contact Benjamin C. Hymas at benjamin.c.hymas.civ@mail.mil or Portia Sampson at portia.r.sampson.civ@army.mil.
Sources Sought Notice: DD Auxiliary Power Units
Buyer not available
The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal (ACC-DTA), is conducting a Sources Sought Notice to gather information on the capabilities of businesses to manufacture the Direct Drive Auxiliary Power Unit (DDAPU) for the M88A2 Heavy Equipment Recovery Combat Utility Lift and Evacuation System (HERCULES). The procurement aims to assess interest and readiness for an estimated production of 70 units per year over a three-year period, with responses requested from both small and large businesses by April 30, 2025. This initiative is crucial for ensuring the operational readiness of military equipment, and interested vendors are encouraged to provide details on their manufacturing capabilities, production timelines, and quality management systems. For further inquiries, potential respondents can contact Angelo Wilson at angelo.b.wilson.civ@army.mil.