J--Services to repair, Mitsui Seiki Horizontal Machining System.
ID: N0024416T0114Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP FLT LOG CTR SAN DIEGOSAN DIEGO, CA, 92136, USA

PSC

MAINT, REPAIR, REBUILD EQUIPMENT (J)

Original Source

https://sam.gov/opp/cdb85069a8b3b8d534589055741758ac/view
Timeline
    Description

    Special Notice: DEPT OF DEFENSE, DEPT OF THE NAVY intends to issue a sole source order to Mitsui Seiki (USA) Inc. for services to repair a Mitsui Seiki Horizontal Machining System. This system is used by the Fleet Readiness Center-Southwest in San Diego, CA. Interested parties must submit their ability to satisfy this requirement via email by Friday, 29 April 2016 at 1:00 PM (PST). The North America Industry Classification System Code is 811310 and the applicable business size is $7.5 million. Mandatory terms and conditions of Federal Acquisition Regulation FAR and DFAR clause will apply to the anticipated award wherever applicable.

    Point(s) of Contact
    Ofelia Salas 619-556-8461
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Services to repair, Mitsui Seiki Horizontal Machining System.
    Currently viewing
    Special Notice
    Similar Opportunities
    Preventative and Scheduled Service for DMG Mori Machines
    Buyer not available
    The Department of Defense, specifically the Fleet Readiness Center Southwest (FRCSW), is seeking proposals for preventative and scheduled maintenance services for eighteen DMG Mori machines located in San Diego, California. The contract will encompass preventative maintenance, emergent repairs, and scheduled service, adhering to the Original Equipment Manufacturer (OEM) standards to ensure optimal functionality of the equipment. This procurement is critical for maintaining the operational efficiency of military assets, with a contract type of Firm Fixed Price (FFP) expected to be awarded by December 9, 2024, at 4:00 PM EST. Interested vendors must submit their proposals via DoD Safe and can direct inquiries to Amanda Taylor or Tiffany Crayle at the provided email addresses.
    DMG MORI DMC 270 FD
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for the procurement of a DMG MORI DMC 270 FD machine tool, which falls under the NAICS code 333517 for Machine Tool Manufacturing. This opportunity aims to identify potential suppliers capable of providing this advanced machinery, which is critical for various defense-related manufacturing processes. The performance of the machine tool is essential for enhancing production capabilities within the defense sector, particularly in San Diego, California, where the goods will be utilized. Interested parties are encouraged to reach out to Kevin Scholz at avnipemarketresearch@dla.mil for further information regarding this sources sought notice.
    Two (2) DMG MORI NTX 2500
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for the procurement of two DMG MORI NTX 2500 machine tools. This opportunity is aimed at acquiring advanced machine tool manufacturing equipment, which is critical for enhancing operational capabilities within defense logistics. The machines will be utilized in various manufacturing processes, underscoring their importance in maintaining the efficiency and effectiveness of defense operations. Interested vendors should reach out to Kevin Scholz at avnipemarketresearch@dla.mil for further details regarding this sources sought notice.
    Intent to Sole Source: HAAS ST-35Y Machine Software Update
    Buyer not available
    The Department of Defense, specifically the Department of the Navy, is seeking a contractor to perform a software update and install a level 2 service key patch for the HAAS ST-35Y machine at the Trident Refit Facility in Bangor, Washington. The contract requires the contractor to provide all necessary personnel, equipment, and services while adhering to the quality standards set by the original equipment manufacturer, including training mechanics on the extraction of the service key. This initiative is crucial for modernizing and maintaining Navy assets, ensuring operational efficiency and safety through expert technician support. Interested parties can contact Kenny Vilayvong at kenny.r.vilayvong.civ@us.navy.mil or Angela Charpia at angela.m.charpia.civ@us.navy.mil for further details, with the performance period scheduled from March 20 to March 28, 2025.
    TRAK K3MRX Knee Mill by Southwest Industries, Inc
    Buyer not available
    Special Notice: DEPT OF DEFENSE - DEPT OF THE NAVY The DEPT OF DEFENSE - DEPT OF THE NAVY, specifically the NAVSUP FLT LOG CTR NORFOLK, intends to award a Sole Source Firm Fixed Price Contract to Southwest Industries, Inc. for the TRAK K3MRX Knee Mill. This notice of intent is not a request for proposals or quotations. Any challenges to this sole source must be sent in writing to morgan.l.mcdaniel6.civ@us.navy.mil. The Government will consider challenges that provide information on an equivalent service that meets their needs. The decision to compete the requirement is at the discretion of the Government.
    Hankook Vertical Turning Centers (VTC)
    Buyer not available
    The Department of Defense, specifically the Pearl Harbor Naval Shipyard Intermediate Maintenance Facility, is seeking qualified contractors for the maintenance and service of two Hankook Vertical Turning Centers (VTC). The procurement requires a certified technician to perform on-site preventive maintenance, repairs, inspections, and software upgrades, ensuring compliance with manufacturer standards and regulations. These services are crucial for maintaining the operational readiness of the U.S. Navy's machinery, with the performance period set from August 28, 2025, to August 27, 2026, during standard business hours. Interested parties should contact Colby Teruya at colby.m.teruya.civ@us.navy.mil or Evangeline Calaustro at evangeline.b.calaustro.civ@us.navy.mil for further details.
    20--MCM 1, STERN SHAFT - AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanics, is soliciting proposals for the procurement of MCM 1 stern shaft and similar replacement parts for repair and modification purposes. This opportunity is critical for maintaining the operational readiness of naval vessels, as these components are essential for ship and boat propulsion systems. Interested vendors should note that the primary contact for this solicitation is Hannah Forsyth, who can be reached at 717-605-3998 or via email at HANNAH.FORSYTH@NAVY.MIL for further inquiries. Details regarding submission deadlines and specific requirements will be provided in the solicitation documents.
    Shear Maintenance and Repair
    Buyer not available
    The Department of Defense, specifically the Naval Supply Systems Command Fleet Logistics Center Jacksonville, is soliciting proposals for the maintenance and repair of the AS 500-14 Shear Machine located at the Naval Construction Training Center in Gulfport, Mississippi. The contract entails critical maintenance tasks, including the replacement of cutting blades and a damaged clamp down cylinder, under a Firm Fixed Price Agreement with a service commencement timeline of 45 days post-award. This procurement is vital for ensuring the operational efficiency of military equipment, emphasizing the importance of quality and reliability in the services provided. Interested small businesses, particularly those that are veteran-owned or meet specific socio-economic classifications, should direct inquiries to Dylan Douglas at dylan.l.douglas.civ@us.navy.mil or Robert Edwards at robert.s.edwards42.civ@us.navy.mil, with past performance questionnaires due by December 12, 2024.
    34--HURCO VM10I VERTICAL MACHINING CENTER
    Buyer not available
    Combined Synopsis/Solicitation DEPT OF DEFENSE is seeking a HURCO VM10I VERTICAL MACHINING CENTER. This metalworking machinery is typically used for precision machining and fabrication processes. The procurement is being handled by DLA MARITIME - PUGET SOUND. Interested parties should review the attached solicitation and specifications and email any questions to shawn.fernandez@dla.mil. It is important to provide a completed signed solicitation package, including all certifications and submittals, to be considered responsive. Delivery lead time should also be indicated in the offer.
    Three (3) Makino F9’s Vertical Machining Center and two (2) Makino a81nx Machining Center
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking to procure three (3) Makino F9’s Vertical Machining Centers and two (2) Makino a81nx Machining Centers for use at Altus Air Force Base in Oklahoma. This procurement aims to enhance machining capabilities, which are critical for maintaining and producing military equipment and components. The machines will play a vital role in supporting defense operations by ensuring precision manufacturing standards are met. Interested vendors can reach out to Jasmine Johnson at Jasmine.1.Johnson@dla.mil or call 804-279-5094 for further details regarding this presolicitation opportunity.