SLAC_Power Amplifier
ID: SLAC_341636_PowerAmplifierType: Solicitation
Overview

Buyer

ENERGY, DEPARTMENT OFENERGY, DEPARTMENT OFSLAC Natl Accel Lab -DOE ContractorMenlo Park, CA, 94025, USA

PSC

ENERGY R&D SERVICES; ENERGY SUPPLY; BASIC RESEARCH (AG11)

Original Source

https://sam.gov/opp/c4b450610cff499599b01419a90a0aff/view
Timeline
  1. 1
    Posted Dec 12, 2023 11:34 PM
  2. 2
    Updated Dec 12, 2023 11:34 PM
  3. 3
    Due Dec 28, 2023 1:00 AM
Description

Solicitation from the Department of Energy, SLAC National Accelerator Laboratory, is seeking a power amplifier for their research facility in Menlo Park, CA. The power amplifier, model 250A400, is a solid-state amplifier with a frequency output range of 10 kHz to 400 MHz and a power of 250 W CW. The laboratory requires one unit of this amplifier. The procurement is for the product only, with no on-site services permitted. The selection process will be based on the lowest price and technically acceptable method. The technical evaluation criteria include frequency output, solid-state technology, minimum power requirement, remote connection capability, and benchtop form factor. Interested vendors are requested to provide a price and lead time quotation by December 27, 2023. The bid closing date for this requirement is also December 27, 2023. Vendors are advised to send their quotes to marissat@SLAC.stanford.edu. The Buy American Act Certification (BAA) applies to awards over $10,000, and the completion of the Representations & Certifications Rider is required. Subcontractors must be registered in the System for Award Management (SAM.gov). The resulting purchase order will be issued on a fixed price basis, with payment terms of NET-30 and freight terms of FOB Destination Prepaid and Add. Vendors are requested to mark and identify proprietary/confidential information provided in response to the solicitation. For any questions, vendors can contact Marissa Tanomrat, Procurement Commodities Team, SLAC National Accelerator Laboratory.

Point(s) of Contact
Katherine Jill A. Coh
(650) 926-2770
kcoh@slac.stanford.edu
Files
Title
Posted
BAA Certification.pdf
3/26/2024
Fixed_Price_Commercial_Supplies_and_Services_Subcontract_Aug2023.pdf
3/26/2024
Reps and certs Rider - September 2022.pdf
3/26/2024
Lifecycle
Title
Type
SLAC_Power Amplifier
Currently viewing
Solicitation
Similar Opportunities
Low-Level Radio Frequency (LLRF) Chassis Assemby
Active
Energy, Department Of
The Energy Department of the United States is seeking a Low-Level Radio Frequency (LLRF) Chassis Assembly through a Combined Synopsis/Solicitation notice. This assembly is typically used for laboratory equipment and supplies. Interested parties are invited to submit a firm fixed price proposal by Tuesday, August 06, 2024, 5:00 PM Pacific. The proposal should be valid for 90 days after submission and can be provided in PDF or any digital format. For complete details, please refer to the attached RFP_SLAC_341260(GN) document. For any inquiries regarding drawings, please contact Giang Ngo at giangn@slac.stanford.edu.
EIC 591 MHz RF Amplifiers Systems
Active
Energy, Department Of
Presolicitation notice from the Department of Energy for the procurement of EIC 591 MHz RF Amplifier Systems. These systems will be used at the Electron-Ion Collider (EIC) at Brookhaven National Laboratory (BNL) in Upton, New York. The RF amplifier systems will be constructed with solid state devices and will operate in both CW and Pulsed modes. The primary mode of operation will be CW, with pulsed operation used during cavity conditioning. The operating class will be AB. The procurement includes two (2) 591MHz, 200kW RF amplifier systems and two (2) 591MHz, 400kW RF amplifier systems. The 200kW systems should be expandable to 400kW using a 2-way waveguide combiner. Both the 200kW and 400kW systems will have a common controller. For more details, refer to the attached Technical Specification.
Solid-State RF Amplifiers
Active
Dept Of Defense
The Department of Defense, specifically the Department of the Navy, is seeking solid-state RF amplifiers for performing lab measurements of RF solid-state device components and circuits. These amplifiers are typically used for measuring and testing electricity and electrical signals. The amplifiers must have integrated protection circuitry and pass typical aging and burn-in testing. They should also come with at least a 2-year warranty, have variable gain adjustment, and a readable display presenting operation status. The amplifiers must meet all specifications across the entire specified frequency range and should be standard commercial products with demonstrated field use. The place of performance is in Washington, District of Columbia, United States. The primary contact for this procurement is Naaja Jacob, and the contact email is naaja.jacob@nrl.navy.mil.
LCLS-II-HE Radio Frequency Beam Position Monitor (RFBPM)
Active
Energy, Department Of
The Energy Department of the United States is seeking a firm to fabricate, assemble, test, and deliver fourteen (14) Radio Frequency Beam Position Monitor (RFBPM) assemblies for the LCLS-II-HE project at SLAC National Accelerator Laboratory. The RFBPM assemblies are used for monitoring the position of the radio frequency beam. Interested parties should refer to the attached Request for Proposal (RFP) for complete details.
AMPLIFIER,ELECTRONI
Active
Dept Of Defense
The Department of Defense, specifically the Department of the Navy, seeks an authorized distributor to supply electronic amplifiers. This is a solicitation for a firm-fixed price contract. The key requirements are as follows: - The contractor must be an authorized distributor of the manufacturer's items, with proof of authorization provided. - The contract encompasses the manufacturing and quality assurance of the supplied amplifiers, which must conform to strict requirements outlined in the solicitation. - Contractors must provide a cost breakdown, including profit rate, and other specified information for justification. - Packaging and marking must adhere to MIL-STD 2073. - The evaluation process will consider price, past performance, and supplier performance risk. Interested parties should submit their quotes electronically to the provided email address, with a 90-day minimum quote expiration date. For clarity, contractors should verify nomenclature, part numbers, and NSNs before submitting their quotes. Additionally, they must comply with the specified inspection and acceptance procedures, and provide a written acceptance prior to contract execution. The contact for this opportunity is Stephanie Perez, whose email is provided as STEPHANIE.R.PEREZ1@NAVY.MIL.