Geotech Soil Testing IDIQ
ID: W912ES24Q0108Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW07V ENDIST ST PAULSAINT PAUL, MN, 55101-1323, USA

NAICS

Testing Laboratories and Services (541380)

PSC

EQUIPMENT AND MATERIALS TESTING- NONMETALLIC CRUDE MATERIALS (H294)
Timeline
    Description

    Combined Synopsis/Solicitation DEPT OF DEFENSE DEPT OF THE ARMY is seeking Geotech Soil Testing services. This service is typically used for performing laboratory testing on samples provided by the US Army Corps of Engineers (USACE), St. Paul District (MVP). The samples include various types such as jar samples, undisturbed tube samples, bag or bucket samples, which are collected for density testing or tests on reconstituted samples. The testing facilities must be validated by the U.S. Army Corps of Engineers Engineering Research and Development Center’s Material Testing Center (MTC) to ensure compliance with relevant regulations. The offeror must have a lab within 50 miles of the USACE St. Paul District Office to be considered for award. This is an UNRESTRICTED - Full & Open Competition solicitation.

    Point(s) of Contact
    Lifecycle
    Title
    Type
    Geotech Soil Testing IDIQ
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Material Testing for Canton Embankment Repair PH2
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers, is seeking qualified testing laboratories to conduct material testing for the Canton Embankment Repair Phase 2 project located in Canton, Oklahoma. The selected laboratories will be responsible for providing all requested test results related to the Canton Toe Road Repair, with the requirement that all testing facilities must be validated by the USACE Material Testing Center (MTC). This procurement is crucial for ensuring the integrity and safety of the embankment repair work, which is vital for the ongoing maintenance of the project site. Interested parties should contact Melissa Hyslop at melissa.d.hyslop@usace.army.mil or call 918-669-7670 for further details, as this opportunity is set aside for small businesses under the SBA guidelines.
    Geotechnical Services
    Active
    Agriculture, Department Of
    The Department of Agriculture, specifically the USDA Forest Service, is soliciting proposals for Geotechnical Services through a total small business set-aside contract. This procurement aims to establish indefinite quantity indefinite delivery (IDIQ) contracts for geotechnical engineering services across multiple states, including North Dakota, South Dakota, Montana, and Northern Idaho, emphasizing the importance of infrastructure integrity. Qualified firms must possess Registered Professional Engineers licensed in the relevant states and laboratory accreditation for materials testing, with a contract value ranging from a minimum of $3,500 to a cumulative limit of $5 million over five years. Interested parties should submit their qualification statements by September 18, 2024, and can contact Traci Jackson at traci.jackson@usda.gov for further information.
    W912QR24R0083 - AE Geotechnical Services IDIQ
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers, is seeking qualified architect-engineer firms to provide geotechnical engineering services through an Indefinite Delivery Indefinite Quantity (IDIQ) contract. The selected firm will be responsible for a range of activities including soil and rock drilling, geotechnical evaluations, laboratory testing, and stability analyses within the Louisville District Military Mission Boundaries. This contract, valued at up to $5 million over a five-year period, will be awarded based on demonstrated competence and qualifications, with task orders ranging from $25,000 to $400,000. Interested firms must submit their qualifications by 10:00 a.m. Eastern on October 11, 2024, and can contact Adyson Medley at adyson.medley@usace.army.mil for further information.
    Laboratory Analysis
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Mission and Installation Contracting Command, is seeking proposals for a contract focused on laboratory analysis and environmental sample collection services at Fort Jackson, South Carolina. The contractor will be responsible for providing all necessary personnel, equipment, and materials to perform sample collection, laboratory analysis, and result reporting, adhering to the standards outlined in the Performance Work Statement. This procurement is critical for ensuring compliance with federal, state, and local environmental regulations, particularly concerning hazardous materials and environmental assessments. Interested contractors must submit their proposals by October 1, 2024, and can direct inquiries to Tonya Goines at tonya.l.goines.mil@army.mil or Faye Jackson at faye.r.jackson.civ@army.mil.
    Non-Destructive Ultrasonic Testing of Welds
    Active
    Dept Of Defense
    The Department of Defense, through the U.S. Army Corps of Engineers, is soliciting proposals for a federal contract focused on Non-Destructive Ultrasonic Testing of welds associated with hydraulic steel structures. The contractor is required to provide eight qualified Level II non-destructive testing technicians to conduct ultrasonic testing on 21 welds across 20 specimens, which include various joint types such as butt joints, T-joints, and corner joints, at the US Army Corps of Engineers Regional Rivers Repair Fleet Facility in Louisville, Kentucky. This initiative is crucial for assessing the structural integrity and safety of hydraulic steel structures, ensuring compliance with federal standards and enhancing the reliability of critical infrastructure. Interested contractors must submit their proposals by September 17, 2024, and can direct inquiries to Amanda Andrews at amanda.andrews@usace.army.mil or Sonia Boyd at SONIA.J.BOYD@USACE.ARMY.MIL.
    Construction Engineering Research Laboratory CSO
    Active
    Dept Of Defense
    Combined Synopsis/Solicitation DEPT OF DEFENSE DEPT OF THE ARMY is seeking Construction Engineering Research Laboratory (CERL) services. CERL is interested in obtaining innovative solutions or potential new capabilities in support of Infrastructure Science and Engineering (ISE) and Operational Science and Engineering (OSE). The solutions may include existing technologies or procedures that are not currently in use but would enhance or streamline mission capabilities. The solutions must be submitted via the ERDCWERX platform. Solutions for the general areas of interest will be accepted on an open continuous basis through October 31, 2024. For more details and submission requirements, visit https://www.erdcwerx.org/construction-engineering-research-laboratory-cso/.
    Resource Conservation and Recovery Act (RCRA) Environmental Laboratory Analysis in Support of Hazardous Waste Permit
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking a contractor to perform laboratory analyses of environmental samples in support of the Resource Conservation and Recovery Act (RCRA) hazardous waste permit at the Pueblo Chemical Depot in Colorado. The contractor will analyze samples such as concrete chips, soils, and wipes to determine concentrations of chemical agents, including mustard and its degradation products, as well as RCRA compounds like metals and mercury. This analysis is critical for ensuring compliance with environmental standards and the closure performance standards established by the Colorado Department of Public Health and Environment. Interested parties should contact Marc Lukaszewicz at marc.s.lukaszewicz.civ@army.mil or Lionel Love at lionel.d.love.civ@army.mil for further details regarding this opportunity.
    Wastewater Treatment Plant Lab Testing
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for laboratory testing services related to wastewater treatment at Scott Air Force Base in Illinois. The selected contractor will be responsible for performing weekly laboratory tests in compliance with the National Pollutant Discharge Elimination System (NPDES) permit, including the provision of sample containers, temperature-controlled transport, and timely reporting of test results within ten calendar days. This procurement is crucial for maintaining environmental safety and compliance in wastewater management, with the contract set aside exclusively for small businesses under NAICS code 541380. Interested parties must submit their proposals, including a cover letter and technical documentation, by the specified deadlines, and can direct inquiries to Erica Bratton at ERICA.BRATTON@US.AF.MIL or Brandon Katka at brandon.katka@us.af.mil.
    Philpott Bulkhead Testing
    Active
    Dept Of Defense
    The Department of Defense, through the U.S. Army Corps of Engineers (USACE), is soliciting quotes for strength and material testing related to the secondary bulkhead of the Philpott Dam in Wilmington, North Carolina. The project aims to assess and rehabilitate the bulkhead, which has been in use since the 1940s and has sustained damage requiring comprehensive testing of both original and new materials, including chemical analyses and non-destructive testing of welds. This procurement is a total small business set-aside under NAICS Code 541330, emphasizing the government's commitment to supporting small business participation in federal contracting. Interested bidders must submit both a Price Quote and Technical Proposal via email by September 23, 2024, to the designated contacts, Benjamin Rickman and Troy Small, with all submissions adhering to specified formatting requirements.
    Lab Testing Services
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Foundry and Propeller Center, is seeking contractors to provide lab testing services for various materials in Philadelphia, Pennsylvania. The procurement involves a range of testing services, including chemical, microstructure, mechanical testing, and non-destructive testing (NDT) for samples such as K-Monel, Inconel 718, Ni-Al-Bronze, and Cu-Ni materials. This contract is critical for ensuring the quality and safety of materials used in Navy operations, with a focus on timely delivery of test results and compliance with strict security requirements. Interested contractors must submit their proposals by September 16, 2024, at 5:00 PM EST, and can contact Vincent Romano or Sean McColgan for further information.