Intent to Sole Source: Massachusetts Army National Guard Simtable
ID: W912SV-24-Q-0023Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW7NE USPFO ACTIVITY MA ARNGDEVENS, MA, 01434-3505, USA

NAICS

Custom Computer Programming Services (541511)

PSC

MISCELLANEOUS SERVICE AND TRADE EQUIPMENT (3590)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)
Timeline
    Description

    The Massachusetts Army National Guard, under the Department of Defense, intends to award a sole source contract for the procurement of a Physical Interactive Simtable Sandtable, along with associated software and maintenance services, to be delivered to Joint Base Cape Cod. This specialized equipment is crucial for conducting realistic incident training scenarios, particularly focusing on wildfire incident management that may affect military training and adjacent civilian properties. The contract will be awarded to Simtable.com LLC, as no other comparable products were identified during extensive market research, and the solicitation is set for issuance on September 12, 2024, with proposals due by September 10, 2024, at 5:00 PM EST. Interested parties may submit capability statements to the primary contact, Melissa Melcher, at melissa.l.melcher2.civ@army.mil.

    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Similar Opportunities
    New England CERFP Collective Training Event, Colchester, VT
    Active
    Dept Of Defense
    The Department of Defense, through the Army National Guard, is soliciting quotes for the New England CERFP Collective Training Event scheduled to take place in Colchester, Vermont, from November 18 to November 22, 2024. This procurement aims to secure training support services under the NAICS code 611519, focusing on emergency response and disaster planning, and is exclusively set aside for small businesses. Interested vendors must be registered in the System for Award Management (SAM) and are required to submit their quotes in three volumes, including technical, past performance, and pricing information, by the specified deadlines. For further inquiries, potential quoters can contact Darlene Howes at darlene.r.howes.civ@army.mil or Daniel Bibeau at daniel.s.bibeau.mil@army.mil, with questions due by September 24, 2024.
    Mobile Marksmanship Training Simulator (MMTS)
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of up to six Mobile Marksmanship Training Simulators (MMTS) for the Montana Army National Guard (MTARNG). These simulators are designed to facilitate Table II, Preliminary Live-Fire Simulations, which are crucial for soldier training in a virtual environment, ensuring that the equipment is portable and can be operated by two personnel while being compatible with various military training scenarios. The selected vendor will be required to deliver the simulators within 90 days of award, provide necessary training and warranty support, and comply with Defense Department regulations. Interested parties should contact Adam Sackman at adam.d.sackman.civ@army.mil or call 406-324-3407 for further details regarding the solicitation W9124V24Q0010, which is set aside for small businesses.
    Snow Broom Head Cassettes
    Active
    Dept Of Defense
    The Department of Defense, specifically the Massachusetts Air National Guard, is seeking to procure five complete sets of United Rotary Brush Snow Broom Cassettes, part number 29-CPW265224, compatible with M-B Companies Inc. model 4618 FMD. The procurement is a total small business set-aside, emphasizing the need for specific technical specifications, including 18-foot split core poly/wire cassette refills with 24 bars and 28 rows. This equipment is crucial for maintaining operational readiness at the Barnes Air National Guard Base in Westfield, Massachusetts. Interested vendors must submit their quotations via email by September 23, 2024, and direct any questions to MSgt Nathan Staples at 104.fw.msc@us.af.mil or Capt Emerald Meredith at emerald.meredith.1@us.af.mil.
    NY Army National Guard Command Post Projection Display System (mRTOC)
    Active
    Dept Of Defense
    The Department of Defense, through the New York Army National Guard, is soliciting offers for the procurement of four Tactical Projection Display Systems (mRTOC) as specified in solicitation number W912PQ-24-Q-0045. These systems are required to be portable, compatible with standard image formats, and must meet the brand name or equal requirement for the HDT Global "106-MRTOC-2700WUXO" model. The procurement is critical for enhancing operational capabilities and ensuring effective communication within military command posts. Interested vendors must submit their quotes by September 25, 2024, and direct any questions to Richard W. Powell at richard.w.powell44.mil@army.mil, with a deadline for inquiries set for September 20, 2024.
    MILO Range Theater Interactive Judgment and De-Escalation Simulator
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Dugway Proving Ground, is seeking to procure a MILO Range Theater 180 Interactive Judgment and De-Escalation Simulator to enhance training capabilities for law enforcement and military personnel. This procurement aims to replace an outdated training system with a comprehensive simulator that offers over 900 scenario options for de-escalation and crisis intervention training, addressing the evolving challenges in law enforcement training. Interested contractors must submit their written quotes by email by 11:00 AM MST on September 25, 2024, and ensure registration in the System for Award Management (SAM) to be eligible for consideration. For further inquiries, contact Nneka Okeke-Stubbs at nneka.okeke-stubbs.civ@army.mil or Paul E. Frailey at paul.e.frailey.civ@army.mil.
    Calibration/Maintenance of TMET GC/MS Systems
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command – Aberdeen Proving Ground, is seeking a contractor to provide a full coverage service agreement for the maintenance and calibration of two Gas Chromatograph/Mass Spectrometer (GC/MS) systems located at the DEVCOM Soldier Center in Natick, Massachusetts. The primary objective of this procurement is to ensure optimal performance and minimize downtime of the GC/MS systems, which are critical for accurate textile testing conducted by the Textile Materials Evaluation Branch. The contract will include annual preventative maintenance visits, software and hardware support from factory-trained engineers, and the provision of calibration certificates and service reports, with a performance period of one base year and three optional years. Interested contractors must submit proposals by 12:00 p.m. EST on September 23, 2024, and can direct inquiries to Chris Welsh at richard.c.welsh2.civ@army.mil or Timothy Konetzny at timothy.m.konetzny.civ@army.mil.
    Golf Simulator
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking proposals for the procurement of a golf simulator, identified as the TRACKMAN 4 Solution or an equivalent, to be installed at Lajes Field, Terceira, Portugal. The procurement requires a comprehensive setup that includes essential components such as radar, a hitting screen, artificial grass, a touchscreen monitor, and a high-performance PC, along with transportation, installation, and a one-year software subscription. This golf simulator will serve as a valuable training tool for the 65th Air Base Group, enhancing recreational opportunities for personnel. Interested vendors must submit their electronic quotes by 2:00 PM local time on 19 September 2024, and should ensure compliance with all solicitation requirements, including registration in the System for Award Management (SAM). For further inquiries, vendors can contact Andrea Silva at andrea.silva.1.pt@us.af.mil or Tania Cardoso at tania.cardoso.2.pt@us.af.mil.
    Virtual Reality Welder Simulator
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking proposals for the procurement and installation of a Virtual Reality Welding Simulator to enhance training programs for vehicle mechanics at Joint Base McGuire-Dix-Lakehurst, New Jersey. The simulator is intended to improve hands-on welding skills through realistic visuals and sounds, paralleling the functionality of flight simulators for pilots, and must accurately represent various welding techniques and devices, including MIG, TIG, stick welders, and oxy-acetylene tools. Proposals are due by September 25, 2024, and will be evaluated based on price, technical acceptability, and past performance, with a contract expected to be awarded shortly thereafter. Interested vendors must comply with the Statement of Work specifications and ensure registration in the System for Award Management (SAM) to be eligible for this total small business set-aside opportunity.
    Metal Working Machine Shop Set (MWMSS) Plasma Table Kits
    Active
    Dept Of Defense
    Presolicitation DEPT OF DEFENSE DEPT OF THE ARMY is seeking Metal Working Machine Shop Set (MWMSS) Plasma Table Kits. These kits are used to support maintenance functions in the field for Military Occupational Specialty (MOS) 91E. The kits consist of various equipment including a FastCut CNC Icon Scout plasma table, a Hypertherm Duramax Machine Torch, a Pelican Plasma Cutter Accessory Case, and a Plasma Table Case. The procurement will be a five-year Indefinite Delivery Indefinite Quantity (IDIQ), firm fixed-price (FFP) type contract with five one-year ordering periods. The solicitation will have brand name or equal restrictions for FastCut CNC, Hypertherm, and Pelican. The anticipated release date for the solicitation is September 30, 2024. For more information, interested parties should monitor SAM.gov.
    BDOC Monitor Upgrade
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army National Guard, is seeking to procure an upgrade for the Base Defense Operations Center (BDOC) monitors, with a focus on enhancing the existing closed circuit TV camera system. This procurement is a sole source acquisition, justified by the proprietary nature of the equipment provided by Advantor Systems Corporation, which is uniquely authorized to manage its technology and is essential for maintaining compatibility with the current Air Force network. The contract is set to be awarded in September 2024, with the closing response date for interested parties on September 23, 2024. For further inquiries, interested vendors can contact CMSgt Nicholas Bastiani at 518-344-2510 or via email at 109.AW.FAL.MSC.Contracting@us.af.mil.