185 Foot Telescoping Boom Aerial Lift
ID: PANRSA25P0000010204Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK CCAD CONTR OFFCORPUS CHRISTI, TX, 78419-5260, USA

NAICS

Other Commercial and Industrial Machinery and Equipment Rental and Leasing (532490)

PSC

LEASE OR RENTAL OF EQUIPMENT- MATERIALS HANDLING EQUIPMENT (W039)

Original Source

https://sam.gov/opp/7d4dacb7af9a47a5a6f33d523dce6e75/view
Timeline
    Description

    The Department of Defense, specifically the Army Contracting Command at the Corpus Christi Army Depot in Texas, is conducting market research to identify potential sources for the rental of a 185-foot telescoping boom aerial lift. This procurement aims to secure a lift that meets specific operational requirements, including a diesel engine, all-wheel or four-wheel drive, and a rotating jib with 120-degree articulation, suitable for maintenance operations at the federal depot. The lift will be utilized primarily for production and infrastructure repair, emphasizing the government's commitment to maintaining essential facilities while ensuring compliance with mechanical and electrical safety standards. Interested vendors should respond with their capabilities and lead time for delivery to the primary contact, Harold "Jay" Russell Jr., at harold.w.russell.civ@army.mil or by phone at 361-961-7831. This sources sought notice is for informational purposes only and does not constitute a request for quotes or a commitment by the government.

    Point(s) of Contact
    Harold "Jay" Russell Jr.
    (361) 961-7831
    harold.w.russell.civ@army.mil
    Jennifer Salyers
    jennifer.l.salyers2.civ@army.mil
    Files
    Title
    Posted
    Boom Lift Salient Characteristics.pdf
    The document outlines the procurement details for a 185-foot telescoping boom aerial lift intended for maintenance operations at a federal depot. It specifies the lift's capabilities, including a diesel engine, all-wheel or four-wheel drive, and a rotating jib with a 120-degree articulation. The platform can accommodate personnel and tools, with a capacity limit of 1,000 lbs for restricted use and 500 lbs for unrestricted use. The lift is to be equipped with a 110V AC receptacle that must meet electrical standards for outdoor use and ensure safety during operation. It will be used primarily for production and infrastructure repair, demonstrating the government's commitment to maintaining essential facilities. The document emphasizes the need for the lift to be suitable for outdoor environments and to facilitate effective work execution while ensuring compliance with specified mechanical and electrical safety standards.
    Lifecycle
    Title
    Type
    185 Foot Telescoping Boom Aerial Lift
    Currently viewing
    Sources Sought
    Similar Opportunities
    4K Forklift
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking to procure a 4K Forklift for use at Fort Hood, Texas. The specifications for the forklift include a diesel engine with a minimum of 47.5 HP, a 4000LB capacity, and various hydraulic and safety features, all of which must comply with the Buy American Act requirements. This equipment is crucial for operational efficiency in warehouse and logistics operations, ensuring that the Army can effectively manage its material handling needs. Interested vendors should provide a picture of the forklift along with the item specification sheet and can contact Rodney Allen at rodney.allen.civ@army.mil or by phone at 254-287-1788 for further details.
    Crane Rental with Operator and Rigger
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified contractors to provide crane rental services with an operator and rigger for the Bass Project at the ERDC Test Facility in Fort Polk, Louisiana. The procurement requires a minimum 225-ton crane with an NCCCO certified operator and rigger for five consecutive 8-hour workdays, scheduled from January 18-22, 2026, to support experimental wall assembly and erection, involving lifts of components up to 68,500 lbs. This opportunity is critical for the execution of testing operations and adheres to strict security protocols, including background checks and compliance with health protection conditions. Interested parties must submit their offers by December 17, 2025, at 1:00 PM CST, via email to the designated contacts, Jennifer Hoben and David Ammermann.
    FY26 PROCUREMENT OF AN AERIAL PLATFORM 20M FOR NAVFAC FE
    Dept Of Defense
    The Department of Defense, through NAVFAC Far East, is soliciting proposals for the procurement of one self-propelled, wheel-mounted, diesel engine-driven telescopic boom aerial platform with a minimum working height of 20 meters for use at Commander Fleet Activities Yokosuka, Japan. The platform must meet specific mandatory characteristics, including a platform capacity of at least 250 kg, compliance with JIS or ISO standards, and various safety and operational features, with delivery required within 600 calendar days from the award date. This procurement is particularly significant as it supports the operational capabilities of the U.S. Navy in the region. Interested vendors, especially Women-Owned Small Businesses, must submit their quotes in Japanese Yen by January 19, 2026, and are encouraged to direct inquiries to primary contact Yuka Yabuta at yuka.yabuta.ln@us.navy.mil or secondary contact Amanda Jo at amanda.jo.civ@us.navy.mil.
    ACV-R Crane Integration
    Dept Of Defense
    The Department of Defense, specifically the Marine Corps Systems Command, is seeking vendors capable of providing Service Cranes for the Amphibious Combat Vehicle-Recovery (ACV-R) under a Sources Sought Notice. The procurement involves the delivery of up to 36 PSC 14029 Service Cranes, which must meet specific lifting requirements, including a capacity of at least 2900 kg (6,400 lbs.) to a height of 16.1 ft, along with compatibility with existing ACV-R systems and remote operation capabilities. This initiative is crucial for enhancing the operational efficiency of the ACV-R platform, which is currently being produced by BAE Systems. Interested contractors are required to submit an executive summary detailing their capabilities by December 19, 2025, to the primary contact, Kendel Phillips, at kendel.phillips@usmc.mil, or the secondary contact, Benjamin Hunsberger, at benjamin.j.hunsberger@usmc.mil.
    25--CAB,TRUCK LIFT
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking quotes for the procurement of two truck lift units, identified by National Stock Number (NSN) 2510016167872. The solicitation is a Request for Quotation (RFQ) and requires delivery to DLA Distribution within 157 days after order placement, with the approved source being 1NWY2 EP-0008276. These truck lifts are critical components for vehicular equipment, ensuring operational efficiency and safety in military logistics. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    Forklift Picker
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking a qualified vendor to supply and deliver a Noblelift Model OP8.5 Electric Order Picker to Fort Eustis, VA, within a 45-day timeframe. The order picker must meet specific technical requirements, including operating on a 24V lithium battery, having a lift height of at least 16.4 feet, and supporting a total load capacity of no less than 850 lbs, while incorporating essential safety features such as operator presence buttons and emergency lowering switches. This equipment is crucial for efficient warehouse operations, ensuring safe and effective material handling. Interested vendors should contact Jadeane Jones at jadeane.m.jones.civ@army.mil or call 757-878-0410 for further details, as this opportunity is set aside for small businesses under the SBA guidelines.
    FY26 PROCUREMENT OF AERIAL PLATFORM 36M FOR NAVFAC FE, YOKOSUKA
    Dept Of Defense
    The Department of Defense, through NAVFACSYSCOM Far East, is seeking proposals for the procurement of two 36-meter aerial platforms for use at NAVFAC, Yokosuka, Japan. The platforms must be self-propelled, wheel-mounted, diesel engine-driven, and meet specific mandatory characteristics, including a minimum platform loading capacity of 450 kg, compliance with JIS or ISO standards, and various safety and operational features. This procurement is critical for supporting operations at the U.S. Navy base in Yokosuka, ensuring that the necessary equipment is available for maintenance and operational tasks. Interested contractors must submit their bids by December 23, 2025, at 2:00 PM Japan Standard Time, and can direct inquiries to Yuka Yabuta at yuka.yabuta.ln@us.navy.mil or Amanda Jo at amanda.jo.civ@us.navy.mil.
    BPA Hydraulic Lifting Equipment
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Combat Capabilities Development Command (DEVCOM), is seeking information from vendors regarding the maintenance and certification of hydraulic lifting equipment at Building 66, located in Natick, MA. The procurement aims to secure inspections, certifications, repair services, and preventive maintenance for various hydraulic equipment, including forklifts, hoists, and lifting devices. This initiative is crucial for ensuring the operational readiness and safety of equipment used by the Army. Interested vendors must submit their responses, including company details and capabilities, by 1:00 PM EST on January 8, 2026, to the primary contact, Michael Dion, at michael.a.dion11.civ@army.mil, with a copy to Brandon Rivett at brandon.j.rivett.civ@army.mil.
    Sources Sought for Class-III Liquefied Petroleum Gas (LPG) Forklift
    Dept Of Defense
    The Department of Defense, specifically the Army, is seeking potential sources for the procurement of a Class-III Liquefied Petroleum Gas (LPG) Forklift to be delivered to Redstone Arsenal in Huntsville, Alabama. The forklift must meet specific requirements, including a 6,000 lbs. capacity, a maximum fork height reach of at least 10 feet, and various safety features such as headlights, mirrors, and a backup alarm. This procurement is crucial for operational efficiency at the facility, and interested parties are invited to submit white papers detailing their capabilities and product specifications by December 23, 2025. For inquiries, contact Jimmy Creech at jimmy.w.creech.civ@army.mil or call 256-842-5142.
    Heavy Equipment Program - Cranes SPE8EC25R0004
    Dept Of Defense
    The Defense Logistics Agency (DLA) Troop Support is seeking proposals for the Heavy Equipment Program, specifically for various types of cranes under solicitation SPE8EC25R0004. This continuous solicitation aims to establish multiple Indefinite Delivery/Requirements Contracts for commercial cranes and associated support services for the U.S. Military and other authorized customers, with a focus on ensuring fair and reasonable pricing. The procurement encompasses a wide range of crane types, including all-terrain, rough terrain, and tower cranes, which are critical for military operations and logistics. Interested vendors must submit their proposals by December 18, 2034, with an initial closing date of December 18, 2025, and can contact Angela Beschner or Robert F. Spadaro, Jr. via email for further information.