USCGC WALNUT SHELL BIODEGRADEABLE OIL
ID: 70Z08500399Type: Combined Synopsis/Solicitation
Overview

Buyer

HOMELAND SECURITY, DEPARTMENT OFUS COAST GUARDSFLC PROCUREMENT BRANCH 2(00085)ALAMEDA, CA, 94501, USA

NAICS

Ship Building and Repairing (336611)

PSC

MAINT/REPAIR/REBUILD OF EQUIPMENT- SHIP AND MARINE EQUIPMENT (J020)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/d951708a23c64ba0a9b3f72e329f7f83/view
Timeline
    Description

    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking proposals from qualified small businesses for the procurement of Shell biodegradable EAL oil for the USCGC Walnut (WLB-225). This requirement arises from critical laboratory analysis indicating severe conditions within the vessel's CPP system, necessitating immediate corrective actions to prevent significant performance loss or component failure due to high water content and acid levels. The procurement involves the delivery of six 55-gallon drums of Shell Biodegradable ISO 68 hydraulic oil to ensure the operational integrity and environmental compliance of the vessel during warm weather conditions. Interested vendors should contact Brenden Cox or Kyler Fisk for further details, with a shipping deadline not exceeding December 30, 2024.

    Files
    Title
    Posted
    WALNUT EAL OIL SOW 10_23_24.docx
    This Statement of Work (SOW) outlines the procurement of Shell biodegradable EAL oil for the USCGC Walnut (WLB-225), initiated due to critical laboratory results indicating severe conditions within the CPP system. The technical standard dictates that immediate diagnostic and corrective actions are necessary to prevent significant performance loss or component failure, as high water content and acid levels have been observed. To address the contamination, the CPP system has already undergone cleaning, but additional Shell Biodegradable ISO 68 hydraulic oil is needed for a complete system purge and flush. The solicitation specifies the delivery of six 55-gallon drums of the specified hydraulic oil to the USCGC Walnut located in Pensacola, FL, with a request for prompt shipping not exceeding December 30, 2024. This document underscores the Coast Guard's focus on maintaining operational integrity and environmental compliance through responsible hydraulic fluid management during warm weather conditions.
    Lifecycle
    Title
    Type
    USCGC WALNUT SHELL BIODEGRADEABLE OIL
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    USCGC WAESCHE LUBE OIL
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors for the oil onloading operation for the vessel USCGC WAESCHE-751, scheduled for delivery at Coast Guard Island in Alameda, California, between November 4 and November 8, 2024. The procurement requires the delivery of 2,500 gallons of Shell Rotella T3 15w40 and 4,300 gallons of Exxon Nuto H100, both to be transported and pumped onboard via truck, along with the preparation of Over Water Transfer notifications and coordination with a U.S. Coast Guard representative for safety protocols. This operation is critical for maintaining the operational readiness of the vessel and ensuring compliance with safety and regulatory standards in maritime fuel transfer. Interested parties should contact Nathaniel Mcloud at Nathaniel.G.Mcloud@uscg.mil or Brian Nicholsen at Brian.s.nicholsen@uscg.mil for further details, as this opportunity is set aside for small businesses under the SBA guidelines.
    OIL COOLER GEARBOX
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking quotations for the procurement of two Oil Cooler Gearboxes, identified by NSN 4420-01-700-3051, from Allied Defense Industries Inc. This requirement is part of the Coast Guard's logistics support for its surface forces, emphasizing the importance of maintaining operational readiness through reliable spare parts. Interested vendors must ensure compliance with specific shipping and packaging requirements, including itemized packing lists and adherence to ASTM-D-3951 standards, with all deliveries to be made to the Coast Guard's Surface Forces Logistics Center in Baltimore, MD, by October 31, 2024, at 10:00 PM EST. For further inquiries, potential offerors can contact Yvette R. Johnson at YVETTE.R.JOHNSON@USCG.MIL.
    CGC ALEX HALEY Allweiler pumps
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking proposals for the procurement of two Allweiler pumps for the USCGC ALEX HALEY, as outlined in a combined synopsis/solicitation. The requirement is for the replacement of inoperable controllable pitch propeller hydraulic pumps, specifically the Allweiler Pump – Series ALLIFT SU, model SUC210R46Q-W184, which is critical for maintaining the operational readiness of the vessel. Interested vendors are required to submit their official quotes, including a SAM.gov registered DUNS number, by 8:00 AM Pacific Time on October 28, 2023, to the primary contact, Donna O'Neal, at Donna.J.O'Neal@uscg.mil. This procurement is set aside for small businesses, and the contract will be awarded on a firm-fixed-price basis.
    OIL,HYDRAULIC DTE26
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting bids for the procurement of Hydraulic Oil DTE26, which is essential for various military applications. The contract requires the manufacture and supply of this hydraulic oil in compliance with specified material and physical requirements, including adherence to ISO 9001 quality standards and shelf-life management protocols. This procurement is critical for maintaining operational readiness and ensuring the reliability of military equipment. Interested vendors must submit their quotes by June 26, 2024, and can direct inquiries to Heidi Jo Below at 717-605-1765 or via email at HEIDI-JO.BELOW@NAVY.MIL.
    SHAFT SHOULDERED
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking proposals for the procurement of a "Shaft Shouldered" component under a federal contract. This opportunity falls under the NAICS code 333996, which pertains to Fluid Power Pump and Motor Manufacturing, and involves the provision of miscellaneous power transmission equipment as classified by the PSC code 3040. The goods are critical for maintaining operational readiness and efficiency within the Coast Guard's fleet. Interested vendors should direct inquiries to Donna Scandaliato at donna.m.scandaliato@uscg.mil or call 410-762-6259 for further details regarding the solicitation process and requirements.
    PUMP, F/O TRANSFER
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking quotations for the procurement of two fuel transfer pumps, identified by NSN 4320-01-118-6395, which are essential for handling hydrocarbon fuels and oils. The pumps must meet specific operational requirements, including a capacity of 50 GPM, a discharge pressure of 60 PSI, and a design suitable for horizontal operation with clockwise rotation. This procurement is critical for maintaining the operational readiness of the Coast Guard's logistics capabilities. Interested vendors must submit their quotations by October 30, 2024, at 10:00 AM EST, and should contact Donna Scandaliato at donna.m.scandaliato@uscg.mil or 410-762-6259 for further information.
    USCG 210' and 270' Medium Endurance Cutters RG COOLERS
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified suppliers for the procurement of Original Equipment Manufacturer (OEM) New Jacket Water, Lube Oil, and Red Gear Coolers (RG Coolers) for the 210' and 270' Medium Endurance Cutters. The requirement includes the supply of various coolant assemblies and coolers, which must adhere to stringent military specifications and quality assurance standards, ensuring that all components are of high quality and conform to specified measurements. These supplies are critical for the operational readiness of the Coast Guard's 210 and 270 Class vessels, and the government emphasizes that only authorized dealers can provide the necessary OEM parts. Interested parties must submit their capability information, including a signed letter from the OEM, by the deadline of five calendar days from the notice publication date, and should direct inquiries to Kimberly Burtwell at kimberly.y.burtwell@uscg.mil or by phone at 571-608-3189.
    FILTER SEPERATOR
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking quotations for a FILTER SEPARATOR, specifically the RACOR MARINE DUPLEX FUEL FILTER WATER SEPARATOR, which is utilized on the 154' WPC main diesel engines. The procurement requires 25 units of this marine fuel/water separator, which must meet specific packaging, preservation, and marking standards in accordance with MIL-STD-2073-1E to ensure safe delivery and compliance upon inspection at the destination. Interested vendors must submit their quotations by October 28, 2024, at 10:00 AM Eastern Standard Time, and should direct inquiries to Donna Scandaliato at donna.m.scandaliato@uscg.mil or by phone at 410-762-6259. All submissions must comply with federal regulations and include necessary representations and certifications as outlined in the solicitation.
    Procurement of Enhanced Digital Electronic Control Units
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking proposals for the procurement of Enhanced Digital Electronic Control Units (EDECUs) through solicitation number 70Z03824QJ0000353. This procurement aims to secure critical components for engine health monitoring and performance management for T700 engines used in MH-60T aircraft, with a focus on ensuring compliance with specifications from the Original Equipment Manufacturer (OEM), Triumph Engine Control Systems LLC. The contract is anticipated to be awarded on a sole-source basis, with a total duration of up to five years, including one base year and four optional years, and proposals must be submitted by November 12, 2024, at 2 PM Eastern Time. Interested vendors should direct their quotations to Tammi Bryant at tammi.m.bryant2@uscg.mil and MRR-PROCUREMENT@uscg.mil, ensuring adherence to the outlined requirements and documentation standards.
    WINSLOW, GRIESSER TECHNICAL SERVICE BUILD / INSTALL / TESTING OF SHAFT SEALS
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the U.S. Coast Guard, is seeking qualified contractors to provide technical services for the build, installation, and testing of shaft seals for the Coast Guard Cutter Winslow, Griesser, at the U.S. Coast Guard Yard in Baltimore, Maryland. The contractor will be responsible for overseeing the installation and testing of propulsion shaft seals, which includes cleaning, inspecting, and renewing various components, with work scheduled to commence around December 1, 2024. This project is critical for maintaining the operational efficiency and safety of the vessel, adhering to stringent quality management and safety protocols, including compliance with OSHA standards and the RAPIDGate Program for secure access. Interested vendors must submit their quotes by November 1, 2024, to Erica Perry at erica.l.perry@uscg.mil, and ensure adherence to all specified regulations and requirements outlined in the solicitation and attached Statement of Work.