Breech Ring Forgings per Drawing for Watervliet Arsenal
ID: W911PT25R0008Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC WVAWATERVLIET, NY, 12189-4000, USA

NAICS

Iron and Steel Forging (332111)

PSC

GUNS, OVER 150MM THROUGH 200MM (1025)

Original Source

https://sam.gov/opp/1d83729b60794306ba67d15a56a074e8/view
Timeline
    Description

    The Department of Defense, through the Army Contracting Command, is soliciting proposals for the procurement of 70 Body Breech Ring Forgings per Drawing #11579761 Rev E, intended for the 155mm M284 Cannon. This solicitation includes two options: one requiring a first article and the other waiving this requirement, emphasizing the need for adherence to stringent quality and delivery standards. The goods are critical for maintaining military readiness and efficacy in defense manufacturing. Interested contractors must submit their proposals by May 19, 2025, following the amendment to the original deadline, and should direct inquiries to Evan Caulfield at evan.j.caulfield.civ@army.mil or by phone at 518-266-4813.

    Point(s) of Contact
    Evan Caulfield
    (518) 266-4813
    evan.j.caulfield.civ@army.mil
    Files
    Title
    Posted
    W911PT25R0008-0001.pdf
    The document outlines an amendment to a solicitation, specifically modification number 0001 for contract W911PT25R0008. The primary purpose of this amendment is to extend the submission deadline for offers from May 8, 2025, to May 19, 2025, at 2:30 PM. All other terms and conditions of the solicitation remain unchanged. The document stipulates that offers must acknowledge receipt of this amendment, and it details methods for doing so, such as returning copies of the amendment or including acknowledgment in submitted offers. The amendment is issued by the Army Contracting Command in Watervliet, NY, and emphasizes the importance of timely acknowledgement to avoid rejection of offers. This modification serves to ensure the integrity of the solicitation process by allowing additional time for contractors to submit their proposals while maintaining existing conditions.
    W911PT25R0008.pdf
    This solicitation, identified as W911PT25R0008, is issued by the Army Contracting Command, detailing the procurement of 70 each of the Body Breech Ring Forging (drawing #11579761 Rev E) for the 155mm M284 Cannon. The contract allows for two options: one with a first article requirement and one without. The offer deadline is set for May 8, 2025, with submission details outlined. Key points include the emphasis on strong delivery and quality requirements; late submissions or non-conforming products may jeopardize future contract considerations. The proposal must meet stringent specifications and the contractor must handle technical data with caution, adhering to export control regulations. Additionally, access to technical data requires a current DD2345 certification. Furthermore, this contract includes explicit clauses on inspection and submission protocols for reporting, with a focus on strict adherence to quality assurance standards. Specific performance metrics demand adherence to delivery schedules to ensure timely fulfillment. The strategic aim is to maintain readiness and efficacy in military supplies, reinforcing vital aspects of defense manufacturing.
    Similar Opportunities
    Spring Pack, per Drawing # 11583595, Revision New, for 155mm M284 Cannon, for the Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command at Watervliet Arsenal, is seeking proposals for the procurement of a Spring Pack, as specified in Drawing 11583595, Revision New, for the 155mm M284 Cannon. This contract requires First Article Testing and includes a base quantity of 317 units, with an option for an additional 100% quantity. The Spring Pack is crucial for the operational functionality of military artillery systems, underscoring its importance in defense capabilities. Interested small businesses must ensure their System for Award Management (SAM) registration is active and submit a DD Form 2345 to access the technical data, with the solicitation expected to be released around December 29, 2025. For further inquiries, interested parties can contact Amanda Robinson at amanda.p.robinson2.civ@army.mil or by phone at 518-266-4931.
    Manufacture of M776 155mm Cannon Tubes
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command at Picatinny Arsenal, is conducting a market survey to identify potential sources for the domestic manufacture of M776 155mm cannon tubes. The objective is to gather information on the capabilities of vendors to produce these cannon tubes, which are critical components of the 155mm M777A2 Towed Howitzer, adhering to U.S. Technical Data specifications. Interested vendors are required to provide detailed information regarding their manufacturing experience, production processes, capacity, and capabilities related to the production of 155mm cannon tubes. Responses must be submitted within 30 days via email to Megan Ross at megan.j.ross.civ@army.mil or Peter Snedeker at peter.t.snedeker.civ@army.mil, and all interested parties must be registered in the System for Award Management (SAM).
    Carrier Drive Assembly
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land Warren, is soliciting proposals for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract for the Carrier Drive Assembly, specifically part number 014499-505 from Meggitt Defense Systems, Inc. This procurement is restricted to approved sources or distributors and includes a guaranteed minimum quantity of 14 units and a maximum of 288 units, with deliveries required at the Red River Army Depot in Texarkana, TX, within 625 calendar days after the order date. Interested offerors must submit their proposals electronically by January 20, 2026, and are encouraged to check the SAM.gov website for updates; for inquiries, they may contact Jon Machacek at Jon.Machacek@dla.mil or by phone at 385-591-2854.
    CONTROL ASSEMBLY,AC
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is soliciting proposals for the procurement of CONTROL ASSEMBLY,AC, a critical component in the manufacturing of small arms and ordnance accessories. This solicitation emphasizes the need for compliance with specific inspection and acceptance criteria, as well as adherence to quality assurance standards, ensuring that all supplied items meet rigorous military specifications. The procurement is vital for maintaining operational readiness and supporting national defense initiatives, with the solicitation closing on February 20, 2025. Interested vendors should direct inquiries to Amy Smith at 385-591-3484 or via email at AMY.SMITH@DLA.MIL for further details.
    DOOR,BREECH ASSEMBL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting offers for the procurement of Breech Door Assemblies, which are critical components for shipboard systems. The contract requires adherence to stringent quality assurance and certification standards due to the high stakes involved, as the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of the ship. Interested contractors must submit their offers by 4:30 PM local time on February 27, 2026, as per the recent amendment to the solicitation, and can reach out to Jordan D. Neely at 717-605-8197 or via email at JORDAN.D.NEELY2.CIV@US.NAVY.MIL for further inquiries.
    Solicitation, Adapter Housing, NSN: 3040-01-531-4475
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for the procurement of "Adapter, Housing" (NSN: 3040-01-531-4475) intended for the Howitzer, 155MM, M777E1 weapon system. This opportunity is a Total Small Business Set-Aside, requiring a base quantity of 938 units with an option for an additional 938 units, and mandates a First Article Test (FAT) along with a FAT Report as part of the submission process. Interested contractors must be registered in SAM, possess a current DD 2345 for access to the export-controlled Technical Data Package (TDP), and adhere to specific quality standards, including ISO 9001:2015. The solicitation closes on December 17, 2025, at 5:00 PM local time, with questions due by December 3, 2025, at 12:00 PM EST; for further inquiries, contact Rachel Gervais at rachel.r.gervais.civ@army.mil or by phone at 520-692-8435.
    Customized Machine Base for Cannon Manufacturing Process Equipment for the Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command at Watervliet Arsenal, is soliciting bids for a customized machine base designed for cannon manufacturing process equipment. This procurement requires the design, fabrication, installation, and training for a machine base capable of handling large workpieces, with specific dimensions and operational capabilities outlined in the Statement of Work. The machine base is critical for enhancing the manufacturing process of artillery systems, ensuring operational efficiency and precision. Proposals are due by December 16, 2025, and interested parties are encouraged to attend a site visit on December 15, 2025, to gain further insights into the project requirements; RSVP is required. For inquiries, contact Amanda Robinson at amanda.p.robinson2.civ@army.mil or 518-266-4931.
    10--RETAINER,EJECTOR CA
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 22 units of the Retainer, Ejector CA, identified by NSN 1095014574485. This procurement may lead to an Indefinite Delivery Contract (IDC) with a term of one year or until the total orders reach $350,000, with an estimated four orders per year and a guaranteed minimum quantity of three. The items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS), highlighting their importance in supporting military operations. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    RING, OBTURATOR
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking procurement for an obturator ring, classified under the PSC code 1025, which pertains to guns ranging from over 150mm to 200mm. This procurement is critical for maintaining the operational readiness and effectiveness of military weaponry systems. The place of performance for this contract is located in California, with Jon Mitchell serving as the primary contact for inquiries, reachable at jon.mitchell@dla.mil or by phone at 614-692-4809. Further details regarding the contract specifics can be found in the associated documentation, which outlines the justification for this procurement.
    Solicitation - Holder, Ammunition NSN: 1398-01-330-9529
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Detroit (ACC-DTA), is soliciting proposals for a Firm Fixed Price Contract to supply "Holder, Ammunition" (NSN: 1398-01-330-9529) for the M1 Abrams Family of Vehicles. This procurement is set aside for small businesses and includes a production quantity of three units, with an option for an additional three units, requiring delivery within 150 days after contract award. The solicitation emphasizes strict adherence to military packaging and marking standards, as well as compliance with quality assurance protocols and training requirements. Interested parties must submit their proposals via email by December 29, 2025, and can contact Haley Bruns at haley.r.bruns.civ@army.mil for further information.