Large aperture high-vacuum compatible rotary stage
ID: NIST-FY25-CHIPS-0079Type: Sources Sought
Overview

Buyer

COMMERCE, DEPARTMENT OFNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGYDEPT OF COMMERCE NISTGAITHERSBURG, MD, 20899, USA

NAICS

Analytical Laboratory Instrument Manufacturing (334516)

PSC

LABORATORY EQUIPMENT AND SUPPLIES (6640)

Original Source

https://sam.gov/opp/1d8b6db31d0b4499bb6d71a865893333/view
Timeline
    Description

    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a large aperture high-vacuum compatible rotary stage to enhance its measurement capabilities in nanoscale device characterization. The rotary stage must meet specific requirements, including the ability to rotate a mass greater than 3 kg along a 135° arc, accommodate a clear aperture of at least 135 mm, and operate within a vacuum chamber at pressures below 10^-6 Torr. This equipment is crucial for non-destructive measurements of nanoscale patterned features, supporting advancements in the American semiconductor industry. Interested vendors should respond to the primary contact, Elizabeth Timberlake, at elizabeth.timberlake@nist.gov, providing detailed information about their capabilities and products by the specified deadline, as this notice is part of market research and does not constitute a solicitation.

    Point(s) of Contact
    Elizabeth Timberlake
    elizabeth.timberlake@nist.gov
    Tracy Retterer
    Tracy.retterer@nist.gov
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Large aperture high-vacuum compatible rotary stage
    Currently viewing
    Sources Sought
    Similar Opportunities
    Atomic Force Microscope for use in a Scanning Electron Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking sources for a compact Atomic Force Microscope (AFM) intended for use in conjunction with a Scanning Electron Microscope (SEM). This procurement is part of the CHIPS Act initiative aimed at enhancing metrology research and development to support semiconductor manufacturing, with a focus on improving device reliability through advanced measurement technologies. The AFM will facilitate live imaging and analysis of two-dimensional materials, crucial for understanding device performance and failure mechanisms, thereby streamlining the fabrication and optimization processes for next-generation semiconductor devices. Interested vendors should contact Cielo Ibarra at cielo.ibarra@nist.gov and submit their responses by the specified deadlines, ensuring they include relevant company information and capabilities.
    Optical Microscope
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of an Optical Microscope. The primary objective is to support the NIST CHIPS Metrology R&D program, which focuses on nondestructive defect detection metrology for semiconductor advanced packaging, requiring a microscope capable of various imaging modes and equipped with advanced features for precision measurements. This procurement is critical for enhancing the accuracy of defect detection in semiconductor failure analysis, with a focus on characterizing defects through precise optical measurements. Interested vendors should submit their capabilities and relevant information to Cielo Ibarra at cielo.ibarra@nist.gov by December 15, 2025, while noting that this notice does not constitute a commitment to award a contract.
    Commercial semi-automatic probe stations
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought notice for the procurement of a commercial semi-automatic probe station. This equipment is essential for conducting reliability testing on silicon carbide field effect transistors (FETs), which are increasingly used in high power semiconductor applications across various industries, including electric vehicles and energy storage. The probe station must meet specific technical requirements, including the capability to probe 300 mm wafers, accommodate both whole wafers and pre-diced dies, and include features such as a heated wafer chuck and a digital microscope. Interested vendors should submit their responses, including company information and capabilities, to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov, by the deadline of December 12, 2025, for any questions regarding this notice.
    Robotic Arms
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking responses to a Sources Sought Notice for the procurement of robotic arms and associated equipment. The requirement includes four collaborative robotic arms with a 600 mm reach, a mountable smart camera, various grippers, and a professional license for RoboDK software, all intended for use in manufacturing complex permittivity standards up to 330 GHz. This initiative supports the NIST CHIPS program, which aims to enhance measurement practices and algorithms for complex permittivity and on-wafer measurements. Interested vendors should submit their responses, including company details and capabilities, to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov, by the deadline for questions on December 17, 2025. Please note that this notice is for market research purposes only and does not constitute a request for proposals or a commitment to award a contract.
    Combined Sources Sought/Notice of Intent to Sole Source: Pump Suppression Module
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to noncompetitively acquire a Pump Suppression Module essential for a new Brillouin Light Scattering (BLS) spectrometer as part of its CHIPS project. This module is critical for accurately measuring magnetic materials parameters, which directly supports advancements in magnetic random-access memories (MRAM) and enhances the semiconductor industry's product reliability and performance. The procurement is intended to be fulfilled by Light Machinery, Inc., the only vendor identified that meets the stringent specifications required for the module, including a suppression capability of at least 60 dB and high transmission rates. Interested parties must submit their responses by August 1, 2025, to the primary contact, Cielo Ibarra, at cielo.ibarra@nist.gov.
    Sources Sought Notice for Continuous Wave Parametric Oscillator (CW OPO) Laser System
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information regarding a Continuous Wave Parametric Oscillator (CW OPO) Laser System to fulfill specific technical requirements. The desired system must include a pump laser, signal and idler laser outputs with defined tunable ranges and power, control electronics compatible with U.S. power and Windows PCs, as well as a high-accuracy wavelength meter and stabilization controls. This procurement is crucial for advancing analytical laboratory capabilities, and interested vendors are encouraged to submit their company details, equipment specifications, and service offerings by email to Forest Crumpler at forest.crumpler@nist.gov by October 31, 2022. This notice serves as market research and does not constitute a solicitation or commitment to award a contract.
    Environmental test chamber
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking information from qualified vendors regarding the procurement of an Environmental Test Chamber and a Water Recirculation System as part of a Sources Sought Notice (NIST-SS26-CHIPS-29). The Environmental Test Chamber must meet specific requirements, including a workspace of over 1.5 cubic feet, a temperature range of -35°C to +175°C, and humidity control between 10%-95% RH, among other technical specifications, to support metrology research for semiconductor device manufacturing. This procurement is crucial for evaluating materials used in semiconductor devices, thereby enhancing device reliability and performance. Interested parties should submit their responses, including company information and product specifications, to Junee Johnson at junee.johnson@nist.gov, as this notice is for market research purposes and no solicitation is currently available.
    CHIPS R&D: Extreme Thermal Cycling Chamber– Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce's National Institute of Standards and Technology (NIST) is seeking to procure an Extreme Thermal Cycling Chamber to support its CHIPS Metrology program, which focuses on the reliability of materials used in advanced semiconductor packaging. The chamber must meet specific technical requirements, including a temperature range of -100 °C to 200 °C and a cycling rate of at least 70 °C/min, to facilitate accelerated aging experiments on polymeric components. This procurement is critical for enhancing metrology capabilities within the U.S. semiconductor manufacturing ecosystem, and interested vendors are encouraged to respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    CHIPS R&D Electrical/thermal TEM holder – Combined Sources Sought/Notice of Intent to Sole Source
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking to procure a specialized electrical/thermal transmission electron microscope (TEM) holder system and compatible microelectromechanical system (MEMS)-based chips for advanced semiconductor research. This procurement aims to enhance measurement capabilities critical for evaluating the readiness of next-generation semiconductors by detecting early-stage indicators of material degradation and device failure under operational conditions. The TEM holder and associated equipment will support NIST's mission to improve manufacturing processes and assess advanced materials in semiconductor production, particularly focusing on two-dimensional and wide bandgap semiconductors. Interested vendors should respond with their capabilities and relevant information to the primary contact, Tracy Retterer, at tracy.retterer@nist.gov, by the specified deadline.
    Sources Sought Notice for two (2) CMOS Cameras
    Commerce, Department Of
    The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is seeking potential sources for two scientific CMOS cameras through a sources sought notice (NIST-SS26-CHIPS-24). These cameras are integral to the Digital Twins for Atomic Layer Deposition Processes Project, aimed at developing and validating digital twin models for atomic layer deposition processes by enabling high-sensitivity and high-speed absorption tomographic measurements. Key technical specifications include a back-illuminated scientific CMOS sensor, high quantum efficiency, global shutter capability, and a minimum frame readout rate of 100 frames per second. Interested vendors should submit their responses, including company information and product details, by December 15, 2025, to Elizabeth Timberlake at elizabeth.timberlake@nist.gov or Donald Collie at donald.collie@nist.gov, with submissions not exceeding 20 pages.