51--INSERTER,SEAL
ID: N0038325QP045Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORTPHILADELPHIA, PA, 19111-5098, USA

PSC

HAND TOOLS, NONEDGED, NONPOWERED (5120)

Original Source

https://sam.gov/opp/443fe9a63765438cad506c9e7cdc3c89/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking qualified sources for the procurement of two units of the Inserter, Seal (NSN 1R-5120-015822336-SX, REF NR ST848). This procurement requires engineering source approval due to the flight-critical nature of the item, necessitating that only previously approved sources are solicited, as new source approvals may not be processed in time to meet government needs. The selected supplier must demonstrate unique design capability and provide necessary technical data to ensure the quality of the part, with proposals due to the primary contact, Bridget M. Murphy, at BRIDGET.M.MURPHY6.CIV@US.NAVY.MIL. Interested parties are encouraged to review the NAVSUP WSS Source Approval Information Brochures for submission requirements and to ensure compliance with qualification standards prior to the contract award.

    Point(s) of Contact
    BRIDGET M. MURPHY, N762.44, PHONE (215)697-5047, EMAIL BRIDGET.M.MURPHY6.CIV@US.NAVY.MIL
    BRIDGET.M.MURPHY6.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    51--INSERTER,SEAL
    Currently viewing
    Presolicitation
    Similar Opportunities
    30--TRANSMISSION,MECHAN - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of 14 units of flight-critical replacement parts, identified by NSN 7R-3010-123915959-SX. This procurement requires Government source approval prior to contract award, as the technical data available has not been deemed adequate for full and open competition, meaning only previously approved sources will be solicited. Interested vendors must submit comprehensive technical data and documentation as outlined in the NAVSUP WSS Source Approval Information Brochures, and failure to provide the required information will result in disqualification from the award process. For inquiries, interested parties can contact Connor C. Lewis at (215) 697-4757 or via email at CONNOR.C.LEWIS@NAVY.MIL.
    49--NRP,COMPENSATOR ASS
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of 39 units of the flight-critical item identified by NSN 1R-4920-016460686-SX, referenced as 36022-100. This opportunity requires that all potential suppliers obtain Government source approval prior to contract award, as the item is essential for aircraft maintenance and repair, and the technical data available does not support full and open competition. Interested parties must submit detailed information regarding their capability to produce the item, including any prior submissions for source approval, as offers lacking the necessary documentation will not be considered. For further inquiries, potential bidders can contact Connor C. Lewis at (215) 697-4757 or via email at CONNOR.C.LEWIS@NAVY.MIL.
    28--CASE AND NOZZLE ASS
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of 22 units of the NSN 7R-2840-000811987-FQ, identified as CASE AND NOZZLE ASS. This procurement requires engineering source approval due to the flight-critical nature of the item, necessitating that only previously approved sources may submit proposals, as new source approvals typically cannot be processed in time to meet government needs. Interested vendors must provide comprehensive documentation as outlined in the NAVSUP WSS Source Approval Information Brochures, and offers lacking the required data will not be considered. For further inquiries, potential bidders can contact Sophia J. Noel at (215) 697-4313 or via email at SOPHIA.NOEL@NAVY.MIL.
    16--NRP,DRIVER ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of six units of the Driver Assembly, identified by NSN 7R-1680-016017102-E7 and reference number 8360293-001. This procurement requires engineering source approval due to the flight-critical nature of the item, necessitating that only approved sources may submit proposals, as the technical data and manufacturing knowledge are not readily available to the Government. Interested parties must provide comprehensive documentation to demonstrate their qualifications, including any prior source approval requests, and must do so within 45 days of this presolicitation notice. For further inquiries, potential bidders can contact Christian M. Markle at (215) 697-6679 or via email at CHRISTIAN.MARKLE@NAVY.MIL.
    1680 - Repair of NIIN 016017102
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the repair of NIIN 016017102, a flight-critical part requiring engineering source approval. The procurement necessitates that only approved sources, which possess unique design capabilities and manufacturing knowledge, can participate, as the technical data required for full and open competition is not adequately available. Interested parties must submit their proposals along with the necessary source approval documentation within 45 days of this presolicitation notice, with the primary contact for inquiries being Christian Markle at christian.markle@navy.mil or by phone at 215-697-6679.
    NSN 5120-01-611-5985 | INSERTER, SEAL
    Active
    General Services Administration
    The General Services Administration (GSA) is soliciting quotes for the procurement of 425 units of the Inserter, Seal (NSN 5120-01-611-5985), a specialized tool critical for the maintenance of military vehicles, specifically the MVG-750 transfer case used in the Mine Resistant Ambush Protected (MRAP) All-Terrain Vehicle. This procurement is a brand name requirement, justified under FAR regulations, as only Marmon-Herrington Co., Inc. can provide this essential tool, which is vital for operational readiness of over 6,000 vehicles in the U.S. Army fleet. Vendors must comply with specific technical and administrative requirements, including registration on SAM.gov and adherence to delivery terms, with quotes due to the GSA by the specified deadline. Interested parties can direct inquiries to Jenna Williams at jenna.williams@gsa.gov or Kylie Ferraz at kylie.ferraz@gsa.gov.
    59--CIRCUIT CARD ASSEMB - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of circuit card assemblies and other replacement parts necessary for repair and modification. This procurement involves a specific National Stock Number (NSN 7R-5998-016407207-SX) with a quantity of five units, and it is critical that the selected source has prior government approval due to the flight-critical nature of the item. Interested vendors must provide detailed technical data and documentation as outlined in the NAVSUP Source Approval Information Brochures, as failure to do so will result in disqualification from the award process. For further inquiries, interested parties can contact Bridget M. Murphy at (215) 697-5047 or via email at BRIDGET.M.MURPHY6.CIV@US.NAVY.MIL.
    17--SLIDE ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of 10 units of the Slide Assembly (NSN 7R-1720-010187536-EY). This procurement requires engineering source approval due to the flight-critical nature of the item, necessitating that only previously approved sources may submit proposals. The selected contractor must demonstrate unique design capabilities and manufacturing knowledge, as the technical data required for the item is not readily available to the government. Interested parties should contact Kimberly Flores at (215) 697-6549 or via email at Kimberly.Flores@navy.mil for further details, and must ensure compliance with the Source Approval Information Brochures to be considered for award.
    16--LINK ASSEMBLY,UPPER
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Navy's NAVSUP Weapon Systems Support, is seeking proposals for a sole source contract to procure nine units of the LINK ASSEMBLY, UPPER, identified by NSN 7R-1615-012212614-VH and reference number 70104-08021-044. This procurement is critical as the government lacks sufficient data to engage alternative sources, emphasizing the importance of Government Source Approval prior to award. The items are subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, highlighting their international trade significance. Interested vendors must submit the required documentation as outlined in the NAVSUP WSS Source Approval Brochure, available online, and direct any inquiries to Casey M. Brown at casey.m.brown20.civ@us.navy.mil.
    FD2030-25-00155
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is conducting a Sources Sought inquiry for the procurement of aircraft metallic seals, specifically NSN 2840-01-308-3707 and P/N 4075870-01. This effort aims to identify potential vendors capable of producing and managing these critical spare parts, which are essential for maintaining aircraft operational readiness. Interested suppliers are encouraged to provide information regarding their manufacturing capabilities and compliance with procurement specifications, including Manufacturing Qualification Requirements and Engineering Data List conditions. Responses should be submitted electronically, and while there is no current solicitation or funding allocated, this initiative is vital for assessing market competitiveness and exploring acquisition strategies, particularly for small businesses. For further inquiries, interested parties may contact 421SCMSRequirements at 421SCMS.Requirements.workflow@us.af.mil or DLAAVIATION.AOB.SourcesSought@us.af.mil.