3D Printer
ID: W911S225U0754Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QM MICC-FT DRUMFORT DRUM, NY, 13602-5220, USA

NAICS

All Other Industrial Machinery Manufacturing (333248)

PSC

ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS (6625)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/5441857ebfb142f08621c6782a8b2547/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a 3D EVO 2X Additive Manufacturing Center, which features a significant build height of 22 inches and a length of 24 inches, capable of manufacturing large-scale parts using various materials including ABS and polycarbonate. This procurement is crucial for enhancing the Army's capabilities in additive manufacturing, allowing for the production of complex components that can support various operational needs. Interested small businesses are encouraged to participate, as this opportunity is set aside for total small business participation under FAR 19.5, with the closing date extended to accommodate submissions. For further inquiries, potential bidders can contact Marvetta Rice at marvetta.l.rice.civ@army.mil or Joy Davis at joy.l.davis18.civ@army.mil.

    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    3D Printer
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Stratasys F900 3D Printer
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting quotes for the procurement of one Stratasys F900 3D Printer, as outlined in the Statement of Work (SOW). This acquisition aims to enhance the existing 3D printing capabilities of the REACT program by adding a machine that will increase throughput by 50.6%, reduce rework, and improve overall shop efficiency for producing aircraft-grade replacement parts using ULTEM 9085 material. The procurement includes the F900 system, validated material licenses, installation, a one-year warranty, and training for personnel, with delivery to Tinker Air Force Base in Oklahoma. Interested vendors must submit their quotes and any inquiries in writing by the specified closing date, and can contact Linsey Laird or Jason Shirazi via email for further information.
    Manufacturing Consumables BPA
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command - Rock Island (ACC-RI), is seeking qualified vendors to establish multiple Blanket Purchase Agreements (BPAs) for manufacturing consumables, specifically for additive manufacturing materials, to support operations at the Rock Island Arsenal, Joint Manufacturing and Technology Center (RIA-JMTC). The procurement includes a range of specific materials such as Maraging Steel powder, 17-4 Stainless Steel powder, and Nickel alloy 718 powder, with vendors required to meet detailed specifications outlined in individual Requests for Quotes. These consumables are critical for advanced manufacturing processes and will be procured under a five-year term with firm-fixed-price orders, where individual orders may reach a maximum value of $9 million. Interested vendors should contact Brandy Huesmann at brandy.m.huesmann.civ@army.mil or John Jacobsen at JOHN.E.JACOBSEN16.CIV@ARMY.MIL for further details, and must submit the necessary documentation to be considered for the BPA pool.
    LCM 3D Printer
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center (NAWCWD) China Lake, is seeking sources for a Lithography-Based Ceramic Manufacturing (LCM) Multi-Material 3D Printer to enhance its capabilities in ceramic-based composite materials research and development. This procurement aims to support the design and characterization of advanced composite materials, particularly for applications such as hypersonic radomes, by enabling high geometric complexity and layer-by-layer control in the manufacturing process. The printer system must include a standalone unit with dual vats for multi-material printing, an integrated LED light source, and a separate cleaning station, along with robust safety measures and comprehensive contractor support for installation and training. Interested firms should submit a capability statement to the Contracting Office by the specified deadline, referencing the solicitation number, and can contact Kyle Hedman or Luke S. Kelley for further information.
    Customized Machine Base for Cannon Manufacturing Process Equipment for the Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command at Watervliet Arsenal, is soliciting bids for a customized machine base designed for cannon manufacturing process equipment. This procurement requires the design, fabrication, installation, and training for a machine base capable of handling large workpieces, with specific dimensions and operational capabilities outlined in the Statement of Work. The machine base is critical for enhancing the manufacturing process of artillery systems, ensuring operational efficiency and precision. Proposals are due by December 16, 2025, and interested parties are encouraged to attend a site visit on December 15, 2025, to gain further insights into the project requirements; RSVP is required. For inquiries, contact Amanda Robinson at amanda.p.robinson2.civ@army.mil or 518-266-4931.
    Naval Surface Warfare Center Carderock Division custom aluminum wire feedstock for use with Naval wire arc additive manufacturing (WAAM) systems
    Dept Of Defense
    The Naval Surface Warfare Center Carderock Division, part of the Department of Defense, is seeking sources for custom aluminum wire feedstock intended for use with Naval wire arc additive manufacturing (WAAM) systems. The procurement includes custom aluminum alloy weld wires and extrusion plates, along with design and fabrication services, aimed at supporting research and development efforts. This opportunity is critical for advancing additive manufacturing capabilities within the Navy, as it involves the provision of specialized materials and rapid turnaround services. Interested parties must submit their responses, demonstrating relevant experience and capabilities, by 3:00 PM Norfolk, VA time on December 18, 2025, to David Crouch at david.w.crouch3.civ@us.navy.mil.
    WIRE EDM
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to provide a Mitsubishi EDM Model MV4800-Wire Electrical Discharge Machine (EDM) for the McAlester Army Ammunition Plant in Oklahoma. The procurement requires a machine that meets specific technical specifications, including a minimum cutting travel of 15 inches on the X-axis, 18 inches on the Y-axis, and 16 inches on the Z-axis, along with a wire range of .006 to .012 inches and a filtration system that filters water to 5 microns. This equipment is crucial for precision machining applications within military operations. Interested small businesses are encouraged to contact David Fortune at david.c.fortune.civ@army.mil or by phone at 918-420-6445 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    OUSD(R&E) Seeks Advanced Manufacturing, Prototypes and Materials (AMPAM)
    Dept Of Defense
    The Department of Defense, through the Office of the Undersecretary of Defense for Research and Engineering (OUSD(R&E)), is inviting companies to participate in the Advanced Manufacturing, Prototypes and Materials (AMPAM) initiative aimed at enhancing the defense industrial base. This opportunity encourages the submission of Concept White Papers and Quad Charts that propose innovative manufacturing processes and emerging technologies, with a focus on collaboration to develop and mature these capabilities for military applications. The initiative is critical for advancing national security objectives by integrating new manufacturing solutions, including advanced electronics, robotics, and additive manufacturing. Interested parties can submit proposals until the closing date of the Broad Other Transaction Announcement (BOTA), which remains open for three years, with periodic Capability Focus Areas (CFAs) issued for specific submissions. For inquiries, contact WHS RPAB at whs.mc-alex.ad.mbx.rpab@mail.mil.
    FORKLIFT
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a Hyster H70A Lift Truck with a nominal capacity of 7,000 lbs, as outlined in a Combined Synopsis/Solicitation notice. The lift truck features a Yanmar 2.1L Turbocharged Diesel engine, a three-stage full free lift mast, and various heavy-duty specifications, making it suitable for warehouse operations at Fort Drum, NY. This equipment is critical for enhancing operational efficiency and safety in material handling tasks. Interested small businesses are encouraged to reach out to Robert Leonard at robert.l.leonard111.civ@army.mil or call 706-544-8658 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    Watervliet Arsenal - Sheet Metal Shear
    Dept Of Defense
    The Department of Defense, specifically the Army's Watervliet Arsenal, is seeking proposals from qualified small businesses to supply a hydraulic sheet metal shear. The procurement involves one unit of a hydraulic shear with a shearing length of 52 inches, requiring a 3-phase 220V, 15HP power supply, with specifications matching Baileigh Industrial Holdings Part BA9-1007087 or an equivalent product. This equipment is crucial for the arsenal's manufacturing operations, emphasizing the importance of quality and timely delivery, as past performance will significantly influence the evaluation process. Interested vendors must submit their quotes electronically and adhere to various compliance requirements, including security policies and reporting obligations, with inquiries directed to Stephanie Webster at stephanie.a.webster8.civ@army.mil or by phone at 518-266-4368.
    Dymax ER2300/CT2300 Replacement
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking sources for the replacement of the Dymax ER2300/CT2300 epoxy at the Anniston Army Depot located in Anniston, AL. This procurement aims to secure a suitable alternative for the specified epoxy, which is critical for various applications within the depot's operations. Interested vendors must submit their responses through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, as email submissions will not be accepted. For further inquiries, potential respondents can contact Christopher Wells at christopher.r.wells36.civ@army.mil or by phone at 571-588-0974.