FOUR (4) HORIZONTAL VACUUM FURANCES WITH TWO (2) MOTORIZED LOADING CARTS
ID: SPE4A8-25-Q-0018Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA AVIATIONRICHMOND, VA, 23237, USA

PSC

METAL HEAT TREATING AND NON-THERMAL TREATING EQUIPMENT (3424)

Original Source

https://sam.gov/opp/d076242bde2748e9b529e8d7d585846f/view
Timeline
    Description

    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking contractors to provide four horizontal vacuum furnaces along with two motorized loading carts. The procurement includes comprehensive requirements such as training, engineering support, technical data, and installation services, all in accordance with the specified Purchase Description VIBB 23-30-1331 dated October 3, 2023. These furnaces are critical for metal heat treating processes at the Fleet Readiness Center East located at Marine Corps Air Station Cherry Point, North Carolina. Interested parties should note that the solicitation is expected to be issued on February 14, 2025, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, contact Randell Hardy at randell.hardy@dla.mil or by phone at 804-279-5292.

    Point(s) of Contact
    Randell Hardy
    (804) 279-5292
    randell.hardy@dla.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    FOUR (4) HORIZONTAL VACUUM FURANCES WITH TWO (2) MOTORIZED LOADING CARTS
    Currently viewing
    Presolicitation
    Similar Opportunities
    One (1) Heat Treat Furnace
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation, is seeking proposals for the procurement of one horizontal loading air furnace and a water quench tank, along with necessary accessories, to be installed at Tinker Air Force Base in Oklahoma. This acquisition is intended to fulfill specific requirements outlined in the Purchase Description VIBB 23-40-1000, necessitating brand-name components such as the Eurotherm-3504 Temperature Controller and Honeywell-UDC 2500 Over-Temperature Controller, ensuring compliance with stringent safety and operational standards. The heat treat furnace is critical for specialized heat treating processes, particularly for aluminum components, enhancing operational capabilities while adhering to federal safety regulations. Interested vendors must submit their proposals via mail by the specified deadline, with the solicitation expected to be released on November 12, 2024. For further inquiries, contact Christina Petrone at christina.petrone@dla.mil or Cynthia Scott at Cynthia.Scott@dla.mil.
    Vacuum Furnace with Gas Quench System
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for a Vacuum Furnace with Gas Quench System to be utilized at Tinker Air Force Base in Oklahoma. The procurement requires a turn-key machine equipped with specific brand name components, including a 35-inch diameter Agilent Varian high-speed vacuum oil diffusion pump and advanced temperature control systems, alongside comprehensive installation and training services. This equipment is critical for heat-treating processes, particularly Nickel and Copper brazing, and must adhere to stringent federal and military safety and operational standards. Interested parties are invited to submit their capabilities and proposals by January 31, 2025, to AVNIPEMarketResearch@dla.mil, with further details outlined in the attached statement of work.
    UPGRADE TWO (2) AUTOCLAVES 8FT x 20FT AND 15FT x 45FT TO BE USED FOR COMPOSITE CURING
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking contractors to upgrade two autoclaves (8FT x 20FT and 15FT x 45FT) for composite curing at the Fleet Readiness Center East in Cherry Point, North Carolina. The procurement includes the upgrade and gas conversion of the autoclaves, along with training, technical data, installation, IUID tagging, and shipping. These autoclaves are critical for the manufacturing processes involving composite materials, which are essential in various defense applications. Interested parties should note that the solicitation is expected to be issued on January 31, 2025, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, contact Randell Hardy at randell.hardy@dla.mil or call 804-279-5292.
    2835-013317354, NOZZLE, TURBINE, 05F
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for a Firm Fixed Price Contract for the procurement of 210 turbine nozzles, specifically part number 162826-200. This solicitation is critical for maintaining operational readiness and support for aircraft systems, as the nozzles are essential components in gas turbines and jet engines. The solicitation will be issued on January 15, 2025, with a closing date of January 17, 2025, and interested parties should direct inquiries to Kory Walker at kory.walker@dla.mil or call 804-801-7757 for further information. A copy of the solicitation will be available on the DLA Internet Bid Board System (DIBBS) on the issue date.
    6660-01-128-1915, HOUSING,ASSEMBLY, WSDC: 82N, Aircraft Launch & Recovery Equipment
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for a Firm Fixed Price Contract for the procurement of 27 units of Aircraft Launch & Recovery Equipment, specifically identified by part number 1148620-1. This critical application item is essential for military operations, and the contract will require delivery to Chesapeake, Virginia, with inspection and acceptance occurring at the destination. Interested vendors should note that the solicitation will be issued on January 17, 2025, and will close on February 18, 2025; further details can be obtained by contacting Joshua Mitchell or Christy Oakley via their respective emails. The final award decision will consider price, past performance, and other evaluation factors as outlined in the solicitation.
    NOM: HYDRAULIC SERVICING UNIT, [WSDC: CXN ]/ END ITEM: AIRCRAFT, OSPREY V-22A, MARINE PR: 7002485751, NSN: 4920-015796399: IAW P/N: 9824
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of a Hydraulic Servicing Unit for the Osprey V-22A aircraft, with a specific National Stock Number (NSN) of 4920-015796399. The contract will involve the acquisition of 23 units from the original equipment manufacturer, Chant Engineering Co Inc., and is classified as an unrestricted procurement, with a delivery schedule of 167 days after receipt of order. This equipment is critical for the maintenance and repair of aircraft, ensuring operational readiness and safety. Interested vendors must submit their proposals by January 23, 2025, and can obtain the solicitation package via the DIBBS website starting December 24, 2024. For further inquiries, potential bidders may contact Lionel Allamby at DSN 312-695-5132 or via email at Lionel.Allamby@dla.mil.
    FAN, VANEAXIAL
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking proposals for the procurement of 200 units of the Vaneaxial Fan, identified by NSN 4140-01-413-2162. This procurement will be conducted as an unrestricted solicitation with a one-time Firm-Fixed price contract, including options for additional quantities of 25% and 50%. The Vaneaxial Fan is critical for various military applications, ensuring efficient air circulation and cooling in equipment and facilities. Interested vendors should prepare for the Request for Proposal (RFP), which will be available on the DLA Internet Bid Board System (DIBBS) after February 6, 2025, and can contact Tamika Hines at Tamika.T.Hines@dla.mil for further inquiries.
    SPE4A725R0191 - 1450 - MAINTENANCE PLATFORM SECTION
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for an indefinite quantity contract (IQC) for the Maintenance Platform Section, identified by NSN: 1450-01-585-3943. The contract will cover a base period of five years, with an estimated annual quantity of nine units, requiring both government first article tests and production lot tests. This procurement is crucial for maintaining guided missile handling and servicing equipment, and it is set aside exclusively for small businesses under FAR 19.5. Interested vendors should prepare to submit written offers, as the solicitation will be available on the DLA Internet Bid Board System (DIBBS) around December 24, 2024. For further inquiries, potential bidders can contact Thuy Ho at Thuy.Ho@dla.mil or call 804-279-6092.
    ONE (1) C-FRAME HYDRAULIC PRESS
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one C-Frame Hydraulic Press. This equipment is required to meet specific operational needs and must be delivered with training, technical data, an IUID tag, shipping, installation, and foundation support. The hydraulic press is crucial for various manufacturing processes, emphasizing the importance of reliable machinery in defense logistics. Interested vendors should note that the solicitation is expected to be issued on December 20, 2024, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, potential bidders can contact Edmund Quee at edmund.quee@dla.mil or by phone at 804-279-2589.
    SPE4A725R0231 – 1660 - DUCT ASSEMBLY,AIR C - AIRCRAFT, GALAXY C-5
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of 24 units of Duct Assembly, Air Conditioning for the Aircraft Galaxy C-5. This procurement is classified under the NAICS code 336413, focusing on the manufacturing of other aircraft parts and auxiliary equipment, and is designated as a total small business set aside. The items are critical for maintaining the operational capabilities of the C-5 aircraft, ensuring effective air conditioning and pressurization systems. Interested vendors should note that the solicitation will be issued on or around January 2, 2025, and can be accessed via the DLA Internet Bid Board System (DIBBS). For further inquiries, potential bidders may contact Rekisha Burton at rekisha.burton@dla.mil or Latrice Brown at latrice.brown@dla.mil.