Aerospace Ground Equipment (AGE) Wash Rack and Pressure Washer
ID: FA252124QB148Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA2521 45 CONS LGCPATRICK SFB, FL, 32925-3237, USA

NAICS

Commercial and Service Industry Machinery Manufacturing (333310)

PSC

AIRCRAFT MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT (4920)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)
Timeline
    Description

    The Department of Defense, specifically the Department of the Air Force, is seeking proposals for the procurement of Aerospace Ground Equipment (AGE) Wash Rack and Pressure Washer under solicitation number FA252124QB148. The requirement includes a modular wash pad system designed for corrosion control, featuring a drive-through configuration, a heated pressure washer with a minimum output of 3 gallons per minute and up to 3,000 PSI, and a closed-loop recycle mechanism. This equipment is critical for maintaining aerospace ground equipment and will be installed outdoors at Patrick AFB in Florida. Interested vendors must submit their proposals by September 10, 2024, at 12 PM EST, and are required to acknowledge an amendment addressing vendor inquiries, which is due by September 3, 2024. For further information, vendors can contact Charles Cowart or Heather Hanks at 45CONS.PKB.email@us.af.mil.

    Point(s) of Contact
    Files
    Title
    Posted
    The Sources Sought notice issued by Patrick Space Force Base seeks information from small businesses that can potentially fulfill a requirement. The objective is to procure a specialized wash rack for Aerospace Ground Equipment, designed to support vehicle and equipment maintenance as part of a corrosion control program. This modular wash pad system must include a robust wash platform, capable of withstanding 10-ton loads, along with an efficient pressure washer system. The electrical systems are specified to use single-phase input voltage, while the pressure washer has specific performance requirements. The government seeks responses from manufacturers and suppliers, emphasizing interest from small businesses. This market research aims to guide a potential small business set-aside decision. Businesses are invited to submit voluntary responses, detailing their capabilities, size, and socio-economic status, along with relevant certifications and registrations, by the deadline of 12 AUG 2024 at 12:00 PM EST.
    The document outlines a combined synopsis and solicitation for the acquisition of aerospace ground equipment, specifically targeting small businesses under solicitation number FA252124QB148. The request includes the purchase of a modular wash pad system and a pressure washer, with specifications detailing their required features and operating standards. Pricing must be inclusive of shipping costs, adhered to a shipping method of F.O.B. Destination, and offerors are urged to detail technical acceptability through comprehensive product specifications. Submission instructions specify the due date for quotes as September 10, 2024, and require various representations and certifications to validate compliance with procurement standards. The evaluation will focus on technical acceptability and pricing, with awards preferably going to the lowest-priced offers that meet technical requirements. The document emphasizes small business engagement, mandates adherence to federal acquisition regulations, and outlines necessary clauses and provisions that govern the contract. Overall, this solicitation illustrates the federal government's structured approach to procure essential aerospace equipment while ensuring compliance with small business regulations and federal acquisition standards, thereby fostering competitiveness and departmental efficiency in procurement processes.
    The document addresses an amendment regarding the Request for Proposal (RFP) FA252124QB148 for Aerospace Ground Equipment (AGE) Wash Rack and Pressure Washer. It outlines responses to vendor inquiries about specifications and requirements for the equipment. Key points include that the wash pad must be a "drive-through" configuration, requiring a heated pressure washer with a minimum of 3-GPM variable pressure up to 3,000 PSI. The equipment is to be installed outdoors on an already prepared concrete slab, although vendors can note additional preparation requirements in their proposals. The system must include a closed-loop recycle mechanism, and the pressure washer is to be a standalone unit. The timeline mandates order placement by September 30, 2024, with delivery details to follow the award. The response also confirms the availability of equipment support for offloading. This amendment serves to clarify vendor questions, ensuring compliance with project expectations and enhancing understanding to promote effective proposals. Acknowledgment of this amendment is required in all submissions.
    Lifecycle
    Title
    Type
    Combined Synopsis/Solicitation
    Sources Sought
    Similar Opportunities
    Aircraft Wheel Washer
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is soliciting proposals for an Aircraft Wheel Washer, specifically designed to accommodate C-130 aircraft wheels, with the solicitation number F3N6114130AW01. The required washer must feature an automatic wash cycle, programmable heating, oil skimming capabilities, and a self-contained filtration system, ensuring efficient cleaning while minimizing manual handling. This procurement is critical for maintaining operational readiness and efficiency in aircraft maintenance at Ramstein Air Base in Germany. Interested vendors must submit their proposals electronically by September 12, 2024, and can direct inquiries to Lt. Jaime Urdaneta at jaime.urdanetamejia.1@us.af.mil or Iris Laub at iris.laub.de@us.af.mil.
    Pressure Power Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting bids for the acquisition of electric hot water pressure washers, aimed at supporting military equipment maintenance and operational readiness at Tinker Air Force Base, Oklahoma. The procurement requires seven units that meet specific technical specifications, including a minimum water output of X gallons per minute at 2900 psi, operational temperatures of at least 135 degrees Fahrenheit, and various safety features and accessories. This initiative underscores the federal government's commitment to inclusivity in contracting, as it is set aside for small businesses, including Women-Owned Small Businesses (WOSB). Interested vendors must submit their quotes and any inquiries in writing by the specified deadlines, with further details available from the primary contact, Jacqueline Henn, at Jacqueline.Henn@us.af.mil.
    Pressure Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking quotes for the procurement of six CoilPro CC-140 pressure washers for use at Malmstrom Air Force Base in Montana. This requirement is a brand-name specification, emphasizing the need for specific equipment that meets outlined performance standards, with a focus on small business participation as the procurement is set aside for total small businesses under FAR 19.5. The pressure washers are essential for maintaining operational efficiency and cleanliness within Air Force facilities, and interested vendors must submit their written quotes by 2:00 PM MT on September 19, 2024, with inquiries due by September 16, 2024. For further information, potential bidders can contact Marquis Patton at marquis.patton.1@us.af.mil or Joshua D. Crist at joshua.crist.1@us.af.mil.
    AIRCRAFT WASH
    Active
    Dept Of Defense
    The Department of Defense, specifically the Air Force Test Center at Eglin Air Force Base, is soliciting proposals for Aircraft Washing Services under the solicitation FA2823-24-Q-3024. The procurement requires contractors to provide all necessary materials, equipment, labor, and personnel to perform aircraft wash and lubrication services, particularly for F-35 aircraft, ensuring compliance with Air Force regulations and safety standards. This service is critical for maintaining aircraft availability and reducing maintenance workloads, with a focus on high-quality performance and adherence to environmental regulations. Interested small businesses must submit their firm fixed price quotes by 11:00 AM CST on September 10, 2024, and are encouraged to register for a site visit scheduled for August 27, 2024. For further inquiries, contact Lindsey Barrow at 850-305-8708 or via email at LINDSEY.BARROW.1@US.AF.MIL.
    F-16 Weapon Parts Cleaner
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking a contractor to provide a specialized Parts Washer/Sonic Cleaner for the maintenance of F-16 weapon systems at Fort Cavazos, Texas. The procurement aims to enhance the cleaning process for internal parts of the MAU-12 bomb rack, Triple Ejector Rack (TER), and 20mm gun, with a focus on reducing labor hours and increasing operational efficiency through advanced cleaning technology. The contractor must deliver a dual-tank cleaning system with ultrasonic capabilities within 90 days of contract award, ensuring compliance with stringent security measures and operational standards. Interested parties should contact Capt Derek Guedes at derek.guedes.3@us.af.mil or call 210-612-0153 for further details.
    Parts Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for a Parts Washer under a combined synopsis/solicitation notice. This procurement aims to acquire commercial products or services related to machine shops, focusing on the maintenance, repair, and rebuilding of hand tools. The opportunity is set aside for small businesses, emphasizing the importance of these services in supporting military operations and equipment maintenance. Interested vendors can reach out to Marketplace Support at 1.877.933.3243 or via email at MarketplaceSupport@unisonglobal.com for further details, as proposals are currently being requested without a formal written solicitation.
    JBSA-Lackland Carwash Upgrade
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is soliciting proposals for the upgrade of the carwash facility at Joint Base San Antonio (JBSA)-Lackland in Texas. The project involves disconnecting existing automatic carwash equipment and installing a manual wash system equipped with a soap brush and trigger wand, aimed at enhancing operational efficiency and serviceability. This upgrade is critical for maintaining the functionality of vehicle maintenance operations within the military, ensuring that vehicles are properly cleaned and maintained. Interested small businesses must submit their quotes by September 18, 2024, and are encouraged to attend a site visit scheduled for August 29, 2024. For further inquiries, potential bidders can contact Kailah Kraus or Vivian Fisher via their respective emails.
    Front-Load Aqueous Part Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Iowa National Guard, is soliciting quotes for a front-load aqueous part washer along with associated services, including detergent, installation, and on-site training. The procurement aims to enhance operational efficiency within military maintenance facilities by acquiring equipment that meets specific salient characteristics, such as a rugged design and compliance with federal safety regulations. Interested contractors must submit their quotes electronically by 10:00 AM Central Time on September 19, 2024, ensuring compliance with the outlined specifications and including necessary documentation. For inquiries, potential bidders can contact Daniel Collins at daniel.w.collins.civ@army.mil or Megan Kaszinski at megan.r.kaszinski.civ@army.mil.
    Weedtechnics Satusteam Model SW800 Weed Steamer (Brand Name or Equal)
    Active
    Dept Of Defense
    The Department of Defense, specifically the 911th Airlift Wing, is seeking quotes for the procurement of a Weedtechnics Satusteam Model SW800 weed steamer or an equivalent model, as outlined in RFQ FA6712Q0050. The requirements include a high-capacity weed abatement unit with specific features such as a heating capability of 247°F, a generator pressure of 1000 psi, and a minimum water tank capacity of 250 gallons, along with necessary training and equipment for effective operation. This procurement is crucial for efficient weed management at the Coraopolis, Pennsylvania facility, emphasizing the importance of advanced technology and proper training for personnel. Interested vendors must submit their quotes by the specified deadline, and inquiries should be directed to Crystal Spurlin at crystal.spurlin@us.af.mil or Paul Davisson at paul.davisson@us.af.mil, with the deadline for questions set for September 18, 2024.
    100 LRS Warehouse Floor Cleaning Machine
    Active
    Dept Of Defense
    The Department of Defense, specifically the 100th Logistics Readiness Squadron at RAF Mildenhall, is seeking to procure an industrial-sized floor cleaning machine to support their Individual Protective Equipment (IPE) section. The required machine must meet specific salient characteristics, including a scrubbing width of at least 1000mm, a minimum tank capacity of 190 liters, and be powered by a maintenance-free Lithium Ion battery, among other specifications. This procurement is crucial for maintaining clean and safe facilities in compliance with UK Health and Safety regulations. Interested vendors must submit their price quotes via email by September 25, 2024, and ensure they have an active SAM account and a NATO Commercial and Government Entity (NCAGE) number. For further inquiries, vendors can contact Charles Kye at charles.kye.1@us.af.mil or Esther Hamilton at esther.hamilton@us.af.mil.