List of KB Duct Parts
ID: W519TC25Q2223Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW390 MCALESTER ARMY AMMO PLANTMCALESTER, OK, 74501-5000, USA

NAICS

All Other Miscellaneous Fabricated Metal Product Manufacturing (332999)

PSC

HOSE AND FLEXIBLE TUBING (4720)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/9b57f67e357a40038d8e9e05711f103a/view
Timeline
    Description

    The Department of Defense, specifically the McAlester Army Ammunition Plant, is seeking proposals for the procurement of KB Duct Parts under a Simplified Acquisition process. This opportunity is set aside for small businesses, including those owned by service-disabled veterans and women, and requires that all submissions meet specific salient characteristics outlined in the solicitation. The goods are critical for military operations, and successful bidders will be expected to deliver products that meet stringent quality standards, with inspections conducted at the destination in McAlester, Oklahoma. Proposals must be submitted by April 7, 2025, at 3:00 PM Central Daylight Time, and interested contractors should direct inquiries to Regina Gibson at regina.l.gibson7.civ@army.mil.

    Point(s) of Contact
    REGINA GIBSON
    (918) 420-7454
    DO NOT FAX
    regina.l.gibson7.civ@army.mil
    Files
    Title
    Posted
    B08_SF1449_Solicitation_25Q2223.pdf
    The document outlines a government solicitation, W519TC25Q2223, issued by the Army Contracting Command - Rock Island for the purchase of duct parts from CECO Environmental Corp, requiring name-brand materials only. Proposals are due by 3:00 PM on April 7, 2025, for a total award amount to be determined. The acquisition is set aside for small businesses, including those owned by service-disabled veterans and women. The contract details specify delivery to the McAlester Army Ammunition Plant, with products inspected and accepted at the destination. Essential clauses from the Federal Acquisition Regulation (FAR) are incorporated, guiding the procurement process, defining evaluation criteria, and stipulating compliance with various laws. The solicitation ensures that successful bidders adhere to established standards and provides necessary instructions for electronic invoicing via the Wide Area Workflow system. The document emphasizes the government's expectation for pre-qualification of contractors and outlines the procedures for addressing concerns during the procurement process, indicating a commitment to regulatory compliance and efficient project execution.
    Lifecycle
    Title
    Type
    List of KB Duct Parts
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    DUCT,FLEXIBLE
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Maritime - Puget Sound, is soliciting bids for the procurement of flexible ducts, specifically designed for the U.S. Navy. The required ducts must meet specific material specifications, including being black, 2-ply polyester/neoprene coated with a spring steel wire helix, and must be UL-94-V-0 listed and labeled as "FIRE RESISTANT PROPERTY OF US NAVY." This procurement is critical for ensuring the operational readiness and safety of naval equipment, with delivery scheduled to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, in January and February 2026. Interested vendors, particularly those classified as Women-Owned Small Businesses (WOSB), must submit their quotes and comply with various requirements, including registration in SAM.gov and adherence to specified FAR and DFARS clauses, with all inquiries directed to Naomi Larson at naomi.larson@dla.mil.
    Box Culvert Bridge Material for Modernization and Repair Work
    Dept Of Defense
    The Department of Defense, specifically the Army, is seeking to procure box culvert bridge materials for modernization and repair work at the McAlester Army Ammunition Plant in Oklahoma. The procurement requires the delivery of six sets of pre-engineered box culverts, each designed to accommodate an E-80 train design load, with specific dimensions of 16 feet in span, 8 feet in rise, and 78 feet in length, along with detailed specifications for wall, floor, and ceiling thicknesses. This project is crucial for maintaining infrastructure integrity and ensuring operational efficiency at the facility. Interested small businesses must submit their bids via email to the primary contact, Mackenzie Helgerson, by the closing date of December 22, 2025, and must be registered in the System for Award Management (SAM) to be eligible for consideration.
    Power Distribution Box Assembly
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command – Detroit Arsenal (ACC-DTA), is soliciting proposals for the procurement of seven Power Distribution Box Assemblies (NSN: 6110-01-608-7660, Part No.: 17-3-3470-2) under a Firm Fixed Price contract. This opportunity is set aside for small businesses and requires compliance with specific military packaging and preservation standards, as well as possession of a Joint Certification Program (JCP) certification to access the Technical Data Package (TDP), which is export-controlled. The assemblies are critical for electrical control applications within military operations, and proposals must be submitted electronically by December 18, 2025, with all inquiries directed to the designated contract specialists, George Campbell and Catherine Castonguay, via their provided email addresses.
    AIRCRAFT, STRATOLIFTER, C/KC-135; PANEL, STRUCTURAL, AIRCRAFT
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of structural panels for the C/KC-135 Stratolifter aircraft. This opportunity is specifically for an Indefinite Quantity Contract with a total ordering period of five years, during which an estimated annual quantity of 10 units is required, with a delivery schedule of 365 days for production. The goods are critical for maintaining the operational capabilities of military aircraft, and the procurement is set aside exclusively for small businesses, emphasizing the government's commitment to supporting small enterprises. Interested vendors must submit their proposals by fax and are encouraged to access the solicitation documents via the DLA Internet Bid Board System, with the issue date anticipated around December 6, 2025. For further inquiries, potential offerors can contact Jenier Mitchell at jenier.mitchell@dla.mil or by phone at 804-659-6388.
    Carrier Drive Assembly
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land Warren, is soliciting proposals for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract for the Carrier Drive Assembly, specifically part number 014499-505 from Meggitt Defense Systems, Inc. This procurement is restricted to approved sources or distributors and includes a guaranteed minimum quantity of 14 units and a maximum of 288 units, with deliveries required at the Red River Army Depot in Texarkana, TX, within 625 calendar days after the order date. Interested offerors must submit their proposals electronically by January 20, 2026, and are encouraged to check the SAM.gov website for updates; for inquiries, they may contact Jon Machacek at Jon.Machacek@dla.mil or by phone at 385-591-2854.
    1 Yoke Rail Modernization
    Dept Of Defense
    The Department of Defense, specifically the Army, is seeking qualified small businesses to procure various railroad materials for the 1 Yoke Rail Modernization project at the McAlester Army Ammunition Plant in Oklahoma. The procurement includes essential components such as railroad rails, turnouts, screw spikes, tie plates, track spikes, rail anchors, joint bars, track bolts, and compromise bars, all of which must meet AREMA specifications and be primarily domestic. This modernization effort is crucial for maintaining the operational efficiency of the rail system at the facility. Interested contractors must submit their bids via email by the specified deadline, with all items required to be delivered by April 16, 2026, and must have an active registration in the System for Award Management (SAM). For further inquiries, contact Mackenzie Helgerson at mackenzie.a.helgerson.civ@army.mil or Ryan Buhman at ryan.j.buhman.civ@army.mil.
    DHE
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals from qualified small businesses for a procurement opportunity identified as DHE. This opportunity falls under the Combined Synopsis/Solicitation notice type and is categorized as a Total Small Business Set-Aside, aimed at acquiring products related to the All Other Petroleum and Coal Products Manufacturing industry. The goods and services procured are essential for military operations, particularly in the area of chemicals, as indicated by the associated PSC code 6810. Interested parties should reach out to Kortny Blanks at kortny.l.blanks.civ@army.mil or call 918-420-7118 for further details regarding the submission process and any deadlines.
    Manifold Assembly
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Oklahoma City, OK, is soliciting proposals for the manufacture and supply of the "Manifold Assembly No. 4," a critical component for aircraft engine systems. This unrestricted procurement encourages open competition and aims to support small businesses, including those owned by women, veterans, and HUBZone entities, while ensuring compliance with stringent quality assurance measures and delivery schedules. The selected contractor will be required to deliver the specified items by February 15, 2025, and must adhere to government regulations regarding material sourcing and payment processing through the Wide Area Workflow (WAWF) system. Interested parties can contact James Callins at 405-855-3581 or via email at JAMES.CALLINS@US.AF.MIL for further details.
    WIRE EDM
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to provide a Mitsubishi EDM Model MV4800-Wire Electrical Discharge Machine (EDM) for the McAlester Army Ammunition Plant in Oklahoma. The procurement requires a machine that meets specific technical specifications, including a minimum cutting travel of 15 inches on the X-axis, 18 inches on the Y-axis, and 16 inches on the Z-axis, along with a wire range of .006 to .012 inches and a filtration system that filters water to 5 microns. This equipment is crucial for precision machining applications within military operations. Interested small businesses are encouraged to contact David Fortune at david.c.fortune.civ@army.mil or by phone at 918-420-6445 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    10--PARTS KIT,GUN
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a Parts Kit for a gun, identified by NSN 1005014660429. The solicitation is for an Indefinite Delivery Contract (IDC) with an estimated quantity of 100 units, to be delivered within 139 days after order placement, and is intended to support military operations by providing essential components for weaponry. Interested vendors must submit their quotes electronically, as hard copies will not be available, and all inquiries should be directed to the DLA via email at DibbsBSM@dla.mil. The contract will be set aside for small businesses, with a guaranteed minimum quantity of 15 units and a total contract value not to exceed $350,000.