PREFORM PER DRAWING FOR WATERVLIET ARSENAL
ID: W911PT25R0004Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC WVAWATERVLIET, NY, 12189-4000, USA

NAICS

Iron and Steel Forging (332111)

PSC

GUNS, OVER 150MM THROUGH 200MM (1025)

Original Source

https://sam.gov/opp/719f50f1792841fdb085e00db9a7bc46/view
Timeline
    Description

    The Department of Defense, specifically the Army Contracting Command at Watervliet Arsenal, is preparing to solicit bids for the procurement of 22 rotary forge preforms, as specified in drawing #11579755 REV A, intended for the 155MM M284 cannon. This pre-solicitation notice indicates that the successful contractor will be required to deliver these items within 180 days after contract award, with the solicitation expected to be released around January 29, 2025. The goods are critical for military applications, emphasizing the importance of compliance with the Joint Certification Program (JCP) for access to the necessary drawings. Interested parties should ensure their System for Award Management (SAM) registration is active and monitor the beta.SAM.gov website for the official solicitation and any amendments, as hard copies will not be provided.

    Point(s) of Contact
    Giuseppe Tropiano
    giuseppe.tropiano.civ@army.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    PREFORM PER DRAWING FOR WATERVLIET ARSENAL
    Currently viewing
    Presolicitation
    Similar Opportunities
    Breech Block Forgings per Drawing for Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, through the Watervliet Arsenal, is soliciting bids for the procurement of Breech Block Forgings required for the 120mm M256 Cannon. The contract involves the delivery of 21 rough machined Breech Block Forgings, with specific requirements for first article approval and associated contract data as outlined in the attached documentation. These components are critical for military applications, ensuring the operational readiness and effectiveness of artillery systems. Interested contractors should submit their quotations electronically, adhering to federal guidelines, and can contact Evan Caulfield at evan.j.caulfield.civ@army.mil or 518-266-4813 for further details.
    Forging Suspension Arm
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command – Rock Island, is soliciting bids for the procurement of 19 M119 Suspension Arm Forgings to support operations at the Rock Island Arsenal's Joint Manufacturing and Technology Center. This procurement is critical for maintaining the manufacturing capabilities of the Army, ensuring the availability of essential components for military equipment. Interested contractors must comply with various Federal Acquisition Regulations (FAR) and provide a Certificate of Conformance and Certified Test Report, with bids due by January 21, 2025, at 10:00 AM Central Time. For further inquiries, contractors can contact Brandy Huesmann at brandy.m.huesmann.civ@army.mil or Ashley Moore at ashley.m.moore85.civ@army.mil.
    Manufacture of the M776 155mm Cannon Tubes
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command at Picatinny Arsenal, is conducting a market survey to identify potential sources for the domestic manufacture of the M776 155mm cannon tubes. The objective is to gather information on the capabilities of vendors to produce these cannon tubes in specified quantities and lead times, as they are critical components of the 155mm M777A2 Towed Howitzer used by the Army. Interested vendors are required to provide detailed information regarding their manufacturing experience, production processes, capacity, and capabilities related to the M776 cannon tubes. Responses must be submitted within 30 days of this notice via email to the designated contacts, Megan Ross and Peter Snedeker, with no cost or obligation to the government.
    Sources Sought - Support, Barrel NSN: 1005-01-530-8726
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal (ACC-DTA), is conducting a Sources Sought Notice to gather information from businesses regarding their capabilities to produce the Support, Barrel (NSN 1005-01-530-8726). This market research aims to inform the government's acquisition strategy for a potential future procurement of this military item, with an initial quantity of 108 units. The information collected will assist in understanding vendor capabilities and qualifications, which is crucial for enhancing procurement from diverse suppliers, particularly small businesses. Interested parties are required to submit their qualifications, production capabilities, and pricing details by January 22, 2025, to Daniel Edwards at daniel.j.edwards82.civ@army.mil.
    Sight Grenade Launcher
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal (ACC-DTA), is seeking proposals for a Firm-Fixed Price contract to procure the MK19 Sight Grenade Launcher, with a total estimated quantity of 1,792 units. This procurement is set aside exclusively for small businesses, emphasizing the government's commitment to leveraging small business capabilities in defense contracts. The solicitation, identified as W912CH-24-R-0161, is anticipated to be released within the next two to four weeks, with a corrected proposal due date of March 4, 2025, as indicated in recent amendments. Interested vendors must ensure they are registered in the DoD’s System for Award Management (SAM) and comply with export control regulations, with further inquiries directed to primary contact Richard Hall at richard.g.hall64.civ@army.mil.
    155mm Modular Artillery for Combat Effectiveness (MACE)
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command-New Jersey, is conducting a market survey to identify solutions for the 155mm Modular Artillery for Combat Effectiveness (MACE) projectile body. The objective is to develop a low-cost projectile capable of delivering various lethal and nonlethal payloads over distances of 30 to 35 kilometers when fired from 39-caliber artillery systems, with potential production rates reaching up to 150,000 units annually. This initiative is critical for enhancing combat effectiveness and ensuring compatibility with both legacy and future artillery systems. Interested parties must submit their responses by January 13, 2025, and can direct inquiries to Mary O'Connell or Eric J. Wagner via the provided email addresses.
    Stock, Gun, Shoulder
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command at Detroit Arsenal, is soliciting proposals for the procurement of 10,128 units of Stock, Gun, Shoulder under solicitation W912CH-24-0203. This opportunity is designated as a 100% Small Business Set-Aside and involves a firm-fixed price, five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract, with a minimum guaranteed quantity of 126 units. The procurement is critical for maintaining a reliable supply chain of essential military components, and it requires compliance with export control laws and handling of Controlled Unclassified Information (CUI). Interested parties must register in the DoD’s System for Award Management (SAM) and ensure they are certified in the Joint Certification Program (JCP) to access technical data. For further inquiries, potential offerors can contact Loren Faist at loren.m.faist.civ@army.mil or by phone at 571-588-9089.
    Market Survey: 120mm, Advanced Tungsten Armor Piercing, Fin Stabilized, Discarding Sabot with Tracer (APFSDS-T) KE-W (Kinetic Energy with Tungsten) A4 cartridges
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command, is conducting a market survey to identify potential sources for the production of 120mm Advanced Tungsten Armor Piercing, Fin Stabilized, Discarding Sabot with Tracer (APFSDS-T) KE-W A4 cartridges. The procurement aims to acquire approximately 760 qualification cartridges that must meet specific performance specifications and be compatible with the M256 cannon or equivalent weapon systems. These cartridges are critical for military applications, emphasizing the importance of advanced ammunition technology in defense operations. Interested firms are required to submit their technical solutions and relevant experience within 30 days of this notice to Emmanuel Perez at emmanuel.f.perez.civ@army.mil and Erick Martins at erick.d.martins.civ@army.mil, while adhering to strict compliance with export control laws and technical data agreements.
    Corrosion resisting steel
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command at Rock Island, is soliciting proposals for the procurement of various stainless steel plates, sheets, and bars to support operations at the Rock Island Arsenal's Joint Manufacturing and Technology Center. Vendors are required to be certified in the Joint Certification Program and must submit their quotes based on a Firm Fixed Price (FFP), adhering to strict delivery schedules and compliance with federal regulations. This procurement is critical for maintaining the operational integrity of military applications, ensuring that high-quality materials are readily available. Interested contractors must submit their proposals by January 30, 2025, and can direct inquiries to John Jacobsen at john.e.jacobsen16.civ@army.mil.
    RSM-22 Robotic Sand Milling Cell
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Rock Island, is soliciting proposals for the RSM-22 Robotic Sand Milling Cell, a specialized system intended to enhance manufacturing capabilities at the Rock Island Arsenal. This procurement is limited to Tinker Omega Sinto LLC as a sole source provider, following the guidelines set forth in Federal Acquisition Regulation (FAR) 13.501(a)(1)(ii), and emphasizes compliance with various federal regulations regarding telecommunications and site access. The successful contractor will be responsible for delivering a system capable of producing pattern-less castings, including comprehensive documentation, installation, and training for personnel, with proposals due by January 21, 2025, at 10:00 AM. Interested parties can reach out to John Jacobsen at JOHN.E.JACOBSEN16.CIV@ARMY.MIL for further inquiries.