Bison 6-Jaw 25" Scroll Chuck
ID: W519TC-25-Q-2186Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC-RIROCK ISLAND, IL, 61299-0000, USA

NAICS

Machine Shops (332710)

PSC

MACHINING CENTERS AND WAY-TYPE MACHINES (3408)

Original Source

https://sam.gov/opp/357732a3885d4575a354feb6c186a83e/view
Timeline
    Description

    The Department of Defense, through the Army Contracting Command – Rock Island, is soliciting proposals for a Bison 6-Jaw 25-inch Scroll Chuck to support operations at the Rock Island Arsenal's Joint Manufacturing and Technology Center. This procurement aims to secure a firm fixed-price contract for a commercial product, emphasizing compliance with Federal Acquisition Regulations and encouraging participation from small businesses. The selected contractor will be required to deliver the scroll chuck within 90 days of award, with proposals due by 11:00 AM on March 25, 2025, and remaining valid for 60 days. Interested parties can reach out to Christine Baker at christine.c.baker6.civ@army.mil or Kylah Rasche at kylah.a.rasche.civ@army.mil for further inquiries.

    Files
    Title
    Posted
    B08_25Q2186_Solicitation.pdf
    The document is a solicitation (W519TC25Q2186) for the procurement of a Bison 25-inch Scroll Chuck, issued by the Army Contracting Command – Rock Island. It follows FAR guidelines for the acquisition of commercial items and outlines the proposal requirements for interested contractors. Proposals must be submitted by March 25, 2025, with validity lasting for 60 days. The contract will be awarded based on the proposal evaluations without discussions. The solicitation emphasizes compliance with telecommunications regulations and includes a series of clauses and provisions regarding responsibility, certifications relating to child labor, and the use of covered telecommunications equipment in line with Executive Order 13126. The expected delivery of the chuck is within 90 days of award, with inspection and acceptance performed by the government at the delivery location. The document is structured into sections that detail procurement procedures, specific requirements for bidders, and necessary compliance certifications. This solicitation highlights the government’s commitment to supporting small and disadvantaged businesses, particularly those certified under programs like service-disabled veteran-owned and women-owned small businesses.
    B08_25Q2186_Solicitation Amendment 0001.pdf
    The solicitation W519TC25Q2186, issued by the Army Contracting Command – Rock Island, seeks proposals for a firm fixed-price contract to supply a Bison 6-Jaw 25-inch Scroll Chuck for the Rock Island Arsenal's Joint Manufacturing and Technology Center. Proposals must be submitted by 11:00 AM on March 25, 2025, and remain valid for 60 days. The solicitation is based on FAR Part 12 for commercial products and FAR Part 13 for simplified acquisition procedures. Offerors must provide competitive pricing and are evaluated without discussions, except for clarifications. The contract emphasizes compliance with various Federal Acquisition Regulations, including those related to telecommunications, representations and certifications, and specific clauses concerning supply inspection and acceptance. This procurement is classified as unrestricted but encourages participation from small businesses. Key specifications include a plain back design with fine adjustment, and delivery is expected within 90 days. Amendments related to this solicitation, including questions and answers from potential bidders, will be published as necessary.
    Lifecycle
    Title
    Type
    Bison 6-Jaw 25" Scroll Chuck
    Currently viewing
    Solicitation
    Similar Opportunities
    Operation of the Quad City Cartridge Case Facility (QCCCF)
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command - Rock Island, is soliciting proposals for the operation of the Quad City Cartridge Case Facility (QCCCF) in Rock Island, Illinois, for Government Fiscal Year 2026. The objective is to develop and manufacture fixed-price prototype capabilities that enhance workload and revenue while maintaining the critical defense industrial base for producing steel and brass cartridge cases at a minimum rate of 3,000 units per month. This initiative is vital for sustaining the U.S. organic industrial base and ensuring the availability of essential ammunition components. Interested parties must submit white papers by January 8, 2026, with further details available from primary contact Mallory Schmitt at mallory.d.schmitt.civ@army.mil.
    CONTROL ASSEMBLY,AC
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is soliciting proposals for the procurement of CONTROL ASSEMBLY,AC, a critical component in the manufacturing of small arms and ordnance accessories. This solicitation emphasizes the need for compliance with specific inspection and acceptance criteria, as well as adherence to quality assurance standards, ensuring that all supplied items meet rigorous military specifications. The procurement is vital for maintaining operational readiness and supporting national defense initiatives, with the solicitation closing on February 20, 2025. Interested vendors should direct inquiries to Amy Smith at 385-591-3484 or via email at AMY.SMITH@DLA.MIL for further details.
    Carrier Drive Assembly
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land Warren, is soliciting proposals for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract for the Carrier Drive Assembly, specifically part number 014499-505 from Meggitt Defense Systems, Inc. This procurement is restricted to approved sources or distributors and includes a guaranteed minimum quantity of 14 units and a maximum of 288 units, with deliveries required at the Red River Army Depot in Texarkana, TX, within 625 calendar days after the order date. Interested offerors must submit their proposals electronically by January 20, 2026, and are encouraged to check the SAM.gov website for updates; for inquiries, they may contact Jon Machacek at Jon.Machacek@dla.mil or by phone at 385-591-2854.
    Winch Drum
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land Warren, is seeking proposals for the procurement of Winch Drums, identified by National Stock Number 2590-01-592-5936. The contract will be a Firm Fixed Price, Long Term Supply Contract with a minimum order of 12 units and a maximum of 263 units over a five-year period, with deliveries primarily to the Red River Army Depot in Texarkana, TX. These winch drums are critical components for military vehicles, necessitating compliance with specific packaging and marking standards to ensure their protection and proper handling during shipment. Interested contractors must submit their proposals, adhering to the outlined requirements, and can contact John P. Moses at john.moses@dla.mil or 385-591-0890 for further information.
    W912CH26R0015 AUTOMATIC STAND MAINTENANCE
    Dept Of Defense
    The Department of Defense, through the United States Army Contracting Command – Detroit Arsenal, is soliciting proposals for the procurement of 49 Automatic Stand Maintenance units, identified by National Stock Number 4910-01-117-4344 and Part Number 1750A. This opportunity is set aside for small businesses and will result in a Firm Fixed Price contract, with an option for an additional 49 units, emphasizing the importance of military packaging and compliance with specific preservation standards. Proposals are due by January 12, 2026, at 5:00 PM EST, and must be submitted electronically to Contract Specialist Robin Walker at robin.a.walker6.civ@army.mil, with all submissions evaluated based on price only. Interested parties should also be aware of the requirement for compliance with Special Packaging Instructions and the necessity for electronic invoicing via Wide Area WorkFlow (WAWF).
    Breech Ring Forgings for the Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, through the Watervliet Arsenal, is soliciting proposals for the manufacture of 15 Breech Ring Forgings (Drawing 12591139, Rev. B) specifically designed for the 105mm M20 Cannon. This procurement requires adherence to strict delivery schedules and quality standards, with the potential for a first article requirement or waiver, and emphasizes the importance of past performance in the evaluation process. The Breech Ring Forgings are critical components in military technology, necessitating compliance with export controls and access restrictions to ensure that only U.S., Puerto Rico, and Canada-based entities can participate. Interested contractors should contact Evan Caulfield at evan.j.caulfield.civ@army.mil for further details, and must possess a current DD 2345 certification to access the Technical Data Package via SAM.gov.
    Spring Pack, per Drawing # 11583595, Revision New, for 155mm M284 Cannon, for the Watervliet Arsenal
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command at Watervliet Arsenal, is seeking proposals for the procurement of a Spring Pack, as specified in Drawing 11583595, Revision New, for the 155mm M284 Cannon. This contract requires First Article Testing and includes a base quantity of 317 units, with an option for an additional 100% quantity. The Spring Pack is crucial for the operational functionality of military artillery systems, underscoring its importance in defense capabilities. Interested small businesses must ensure their System for Award Management (SAM) registration is active and submit a DD Form 2345 to access the technical data, with the solicitation expected to be released around December 29, 2025. For further inquiries, interested parties can contact Amanda Robinson at amanda.p.robinson2.civ@army.mil or by phone at 518-266-4931.
    Winch, Drum, Vehicle M
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land Warren, is seeking proposals for the acquisition of Winch, Drum, Vehicle M, specifically the NSN: 2590-01-592-5927, manufactured by DP Manufacturing Inc. This procurement is a total small business set-aside, requiring offers for a firm fixed price contract for a total quantity of five units, with an option for five additional units, to be delivered within 160 days after award to DLA Distribution Red River in Texarkana, Texas. The items are critical components for vehicular applications, emphasizing the importance of compliance with specific manufacturing standards and traceability documentation. Interested vendors must submit their proposals electronically to the primary contact, Stacy M. Johnson, at stacy.m.johnson@dla.mil by January 26, 2026, at 1:00 PM EST, ensuring adherence to all outlined requirements.
    53--HANDWHEEL
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of handwheels, specifically NSN 5340015469218, under a Combined Synopsis/Solicitation notice. The requirement includes an initial order of five units, with the potential for an Indefinite Delivery Contract (IDC) lasting one year or until the total orders reach $350,000, with an estimated four orders per year. These handwheels are critical components in various military applications, and items will be shipped to multiple DLA depots both within the continental United States and overseas. Interested vendors must submit their quotes electronically, and for inquiries, they can contact the DLA at DibbsBSM@dla.mil. The solicitation is available online, and hard copies will not be provided.
    31--CYLINDER,HOIST
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of hoist cylinders. This contract involves the manufacture and supply of hoist cylinders, which are critical components used in various naval applications, ensuring operational efficiency and safety. The solicitation is open until December 31, 2025, and interested vendors must comply with specific quality assurance and inspection requirements, including adherence to military standards and regulations. For further inquiries, potential bidders can contact James E. Lewis at 717-605-7403 or via email at JAMES.E.LEWIS711.CIV@US.NAVY.MIL.