Emerging Technology CNC Plasma Cutting Table
ID: FA812525Q0035Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8125 AFSC PZIMATINKER AFB, OK, 73145-3303, USA

NAICS

Other Measuring and Controlling Device Manufacturing (334519)

PSC

METAL FINISHING EQUIPMENT (3426)

Original Source

https://sam.gov/opp/b340a8af8c104734b5bdf34345773390/view
Timeline
  1. 1
    Posted Apr 8, 2025, 12:00 AM UTC
  2. 2
    Updated Apr 8, 2025, 12:00 AM UTC
  3. 3
    Due Apr 24, 2025, 5:00 PM UTC
Description

The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the acquisition of an Emerging Technology CNC Plasma Cutting Table to be delivered to Tinker Air Force Base, Oklahoma. This procurement aims to enhance the capabilities of the 76 CMXG by providing a high-definition plasma cutting system that will improve efficiency in cutting conductive materials, thereby facilitating follow-on fabrication processes. The project includes not only the purchase of the equipment but also its installation, performance verification, and training services for government personnel, with a strong emphasis on safety and environmental compliance. Interested vendors, particularly Women-Owned Small Businesses (WOSB) and economically disadvantaged women-owned small businesses (EDWOSB), must submit their quotes by the specified closing date and can direct inquiries to Jacqueline Henn at Jacqueline.Henn@us.af.mil.

Point(s) of Contact
Jacqueline Henn
Jacqueline.Henn@us.af.mil
Files
Title
Posted
FA812525Q0035_StatementOfWork.pdf
Apr 8, 2025, 4:05 PM UTC
The document outlines a Statement of Work (SOW) prepared by OC-ALC/OBCA for acquiring an Emerging Technology Precision CNC Plasma Table for Tinker Air Force Base. The main purpose is to contract for the purchase, installation, performance verification, and training services associated with this high-definition plasma cutting equipment. The 76 CMXG seeks to enhance its capabilities beyond manual plasma cutting, incorporating a precision CNC table which is crucial for effectively cutting conductive materials such as metals with minimal preparation needed for follow-on fabrication processes. Key requirements include specifications for the equipment, installation responsibilities, performance testing protocols, and on-site training for government personnel. Emphasis is placed on safety procedures, environmental compliance, waste management, and the need for contractor adherence to established laws and regulations. The project also mandates robust communication regarding safety hazards and emergency procedures during operations at the base. Overall, this document is a formal government RFP detailing essential specifications and operational guidelines necessary for successful vendor engagement in delivering advanced manufacturing technology to a military installation.
FA812525Q0035.pdf
Apr 8, 2025, 4:05 PM UTC
The document is a solicitation for commercial products and services specifically targeted at Women-Owned Small Businesses (WOSB). It outlines various administrative and procedural details essential for submitting an offer in response to the request. Key components include sections for filling in contract numbers, requisition numbers, solicitation dates, and details on delivery and invoicing. It emphasizes that the award may be set aside for economically disadvantaged women-owned small businesses (EDWOSB) among others, such as service-disabled veteran-owned and Hubzone businesses. The document also requires the contractor's signature, indicating acceptance of the solicitation's terms and conditions. Additionally, it references necessary federal acquisition regulations and specifies necessary blocks that must be completed by the offeror to ensure compliance. Overall, the document serves as a formal request for quotes (RFQ) or proposals (RFP), facilitating procurement processes while promoting equitable access for women-owned businesses in federal contracting opportunities.
Lifecycle
Title
Type
Emerging Technology CNC Plasma Cutting Table
Currently viewing
Solicitation
Emerging Technology CNC Plasma Cutting Table
Presolicitation
Similar Opportunities
W911KF-25-Q-0025
Buyer not available
The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a 20,000-watt CNC Fiber Laser Cutting Center with Pallet Changer to be delivered and installed at the Anniston Army Depot in Alabama. This opportunity is set aside for small businesses under the NAICS code 333992, which pertains to Welding and Soldering Equipment Manufacturing, highlighting the importance of advanced cutting technology in military operations and manufacturing processes. The solicitation is expected to be issued electronically on April 9, 2025, and interested vendors must submit their proposals electronically, as hard copies will not be provided. For further inquiries, interested parties can contact Sonja Freeman at sonja.l.freeman.civ@army.mil or by phone at 571-588-0961.
Flash Thermography
Buyer not available
The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for a Flash Thermography System under the Women-Owned Small Business (WOSB) contracting framework. The procurement aims to acquire a non-destructive inspection (NDI) system that includes a Mid-Wave Infrared camera, a flash illumination system, a ruggedized data acquisition computer, and advanced signal reconstruction software to enhance inspection capabilities at Tinker Air Force Base. This system is critical for ensuring safety and efficiency in maintenance processes within the Air Force. Interested vendors should note that the delivery requirement is set for July 21, 2025, and must comply with various federal procurement protocols. For further inquiries, contact Shana Mandley at shana.mandley@us.af.mil or Sheridan Robison at sheridan.robison@us.af.mil.
Emerging Tech Portable Shearography System
Buyer not available
The Department of Defense, specifically the Department of the Air Force, is seeking proposals for the procurement of an Emerging Technology Portable Shearography System to be delivered to Tinker Air Force Base in Oklahoma. This contract requires the contractor to provide a system that meets specific technical specifications, including a built-in laser with a minimum power of 150 mW, thermal stress devices, and advanced image processing capabilities, along with on-site training for six operators. The Portable Shearography System is crucial for enhancing inspection capabilities within the Air Force, ensuring compliance with safety and environmental regulations throughout its operation. Interested vendors can reach out to primary contact Shana Mandley at shana.mandley@us.af.mil or secondary contact Sheridan Robison at sheridan.robison@us.af.mil for further details regarding the solicitation.
TEAD - FY25 - Water Jet
Buyer not available
The Department of Defense, specifically the Army Contracting Command - Rock Island, is seeking proposals for the procurement of a Water Jet, specifically the OMAX 80X AbrasiveJet with a 30 HP EnduroMax Pump, under solicitation W519TC25R2020. The contract aims to acquire a complete water jet system, including essential components and installation support, to enhance manufacturing capabilities at the Tooele Army Depot in Utah. This procurement is critical for advancing operational efficiency and sustainability within the National Defense sector, adhering to federal green energy standards. Interested small businesses must submit their proposals by April 29, 2025, and can direct inquiries to Rebecca Meeke at rebecca.l.meeke.civ@army.mil or Megan Frost at megan.k.frost2.civ@army.mil.
Aircraft Stands
Buyer not available
The Department of Defense, specifically the Department of the Air Force, is soliciting proposals from qualified small businesses for the procurement of five aircraft stands to support the 565th Aircraft Maintenance Squadron at Tinker Air Force Base in Oklahoma. The contract requires the selected contractor to handle the construction, inspection, delivery, assembly, and installation of the stands, adhering to specific technical criteria and safety regulations outlined in the Statement of Work. This procurement is crucial for maintaining operational effectiveness and safety in military aircraft maintenance operations. Interested vendors must submit their quotes by the specified closing date and ensure they have an active DD Form 2345 for access to technical specifications; inquiries should be directed to Linsey Laird or Jason Shirazi via their provided email addresses.
Large Scale CNC Machines
Buyer not available
The Department of Defense, through the Naval Surface Warfare Center Philadelphia Division, is soliciting proposals for a contract to provide a Coolant Fill System from 168 Manufacturing, specifically designed to support seven large-scale CNC machines at the Naval Foundry and Propeller Center. The procurement emphasizes the need for brand name parts, including the FS40 Central Pump, to ensure optimal operation and maintenance of the machines, which are critical for defense manufacturing processes. This initiative not only aims to fulfill specific operational requirements but also supports the government's commitment to contracting with Women-Owned Small Businesses (WOSB). Interested vendors must submit their proposals by May 12, 2025, and can direct inquiries to Shawn M. Waters at shawn.m.waters@navy.mil or Jillian Randazzo at jillian.randazzo.civ@us.navy.mil.
Automated Laser Coupon System
Buyer not available
The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the procurement of an Automated Laser Coupon System intended for use at Tinker Air Force Base in Oklahoma. This system is designed to enhance the management and dispensing of coupons for thermal spray repair processes, ensuring compliance with safety standards and operational efficiency. The procurement emphasizes the importance of a current model that is environmentally friendly and features accessible components for maintenance, with a focus on quality assurance and thorough training for staff. Interested vendors should contact Alaina Hill at alaina.hill@us.af.mil or Kyle Newcomb at kyle.newcomb@us.af.mil, with proposals due by April 28, 2025, as per the amended solicitation guidelines.
FA812525Q0055 - A25-041 UniWest EVI Unit (Brand Name)
Buyer not available
The Department of Defense, specifically the Air Force, is soliciting proposals from qualified small businesses for the acquisition of a UniWest Advanced Eddy Current Instrument and related equipment, under the solicitation FA812525Q0055. The procurement aims to secure portable equipment capable of generating encoded C-Scan results for on-site aircraft inspections, which is critical for maintaining aircraft safety and operational readiness. This initiative underscores the Air Force's commitment to utilizing advanced testing technology while promoting diversity in procurement by encouraging participation from Women-Owned Small Businesses (WOSB). Interested vendors should direct inquiries to Chelsie Hannah at chelsie.hannah@us.af.mil or Tran Tran at Tran.Tran.1@us.af.mil, with proposals due within the specified timeline for delivery to Tinker Air Force Base.
KC-135 Maintenance Platform Systems
Buyer not available
The Department of Defense, specifically the Air Force Sustainment Center, is seeking proposals for the procurement of KC-135 Maintenance Platform Systems at Tinker Air Force Base in Oklahoma. This initiative aims to enhance maintenance capabilities for the KC-135 aircraft by acquiring four sets of specialized work stands, including cargo door stands, aileron stands, and beavertail stands, all designed to meet stringent safety and operational standards. The procurement is set aside for small businesses, with a Firm Fixed Price contract anticipated, and proposals must be submitted by April 30, 2025, with evaluations based on technical acceptability and lowest total evaluated price. Interested parties can reach out to Cory Rainey-Hedrick or Marc J. Kreienbrink via email for further information.
Magnetic Particle Bench Replacement
Buyer not available
The Department of Defense, specifically the Department of the Air Force, is seeking to procure five Magnetic Particle Inspection Benches, including three Model 3509A-01 and two Model 3606, under a total small business set-aside contract. These benches are critical for inspecting defects in ferrous metals, particularly in aircraft and engine components, ensuring operational readiness and safety through precise magnetization and demagnetization processes. The procurement emphasizes adherence to stringent technical specifications and standards, with a focus on maintaining operational continuity by utilizing brand-name equipment already in use, minimizing retraining and support costs. Interested vendors must submit their quotes by May 16, 2025, and ensure registration in the System for Award Management (SAM) to be eligible for consideration. For further inquiries, contact Margaret King at margaret.king.1@us.af.mil.