Market Survey: The FAA has a requirement for an Abrasive Waterjet Cutting Machine to be located at the MMAC in OKC, OK 73169.
ID: 6973GH-25-WATERJETType: Sources Sought
Overview

Buyer

TRANSPORTATION, DEPARTMENT OFFEDERAL AVIATION ADMINISTRATION6973GH FRANCHISE ACQUISITION SVCSOKLAHOMA CITY, OK, 73125, USA

NAICS

Machine Tool Manufacturing (333517)

Original Source

https://sam.gov/opp/c609218bd74f424286f301542f318b3e/view
Timeline
    Description

    The Federal Aviation Administration (FAA) is conducting a market survey to identify potential contractors for the acquisition of an Abrasive Waterjet Cutting Machine, which will be located at the Mike Monroney Aeronautical Center (MMAC) in Oklahoma City, Oklahoma. The procurement aims to establish clear requirements for the machine's design, performance, and safety standards, with a focus on cutting metal plates with high precision and tolerances, utilizing advanced features such as pumps capable of 60,000 psi and redundant safety systems. This equipment is critical for enhancing the FAA's operational capabilities, ensuring compliance with ASME standards, and providing comprehensive installation and training services. Interested parties should contact Bryon Nolan at bryon.r.nolan@faa.gov for further information regarding this opportunity.

    Point(s) of Contact
    Bryon Nolan
    bryon.r.nolan@faa.gov
    Files
    Title
    Posted
    Statement_of_Work__AJW-L960 Abrasive Waterjet REV 2.pdf
    The FAA Logistics Center (FAALC) has issued a Statement of Work (SOW) for the acquisition of an Abrasive Waterjet Cutting Machine, aiming to establish clear requirements for contractors regarding design, performance, and safety standards. The equipment will primarily be used for cutting metal plates with specified accuracy and tolerances, and it must include a variety of high-pressure features, such as pumps capable of outputting 60,000 psi and redundant safety systems. The SOW specifies rigorous operational parameters, including precision requirements for both conventional and advanced 5-axis cutting modes. Furthermore, the document outlines environmental protections, maintenance operations, and the necessary design characteristics, ensuring ease of access for operators and safety compliance with ASME standards. The contractor is also expected to provide comprehensive installation, training, and technical support services. Manuals and documentation must be available in English, with provisions for other languages as needed. This procurement outlines FAALC's commitment to advancing its operational capabilities through high-quality, efficient machinery while ensuring safety and compliance with regulations.
    Similar Opportunities
    Construct MMAC Warehouse Facility
    Buyer not available
    The Department of Transportation, through the Federal Aviation Administration (FAA), is seeking qualified contractors for the construction of a new MMAC Warehouse Facility located in Oklahoma City, Oklahoma. This procurement aims to establish a commercial and institutional building that will support the operational needs of the FAA. The construction of this facility is crucial for enhancing the efficiency and effectiveness of FAA operations in the region. Interested parties can reach out to Andre Casiano at andre.casiano@faa.gov or call 405-954-7850 for further information regarding this opportunity.
    Three (3) Makino F9’s Vertical Machining Center and two (2) Makino a81nx Machining Center
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking to procure three (3) Makino F9’s Vertical Machining Centers and two (2) Makino a81nx Machining Centers for use at Altus Air Force Base in Oklahoma. This procurement aims to enhance machining capabilities, which are critical for maintaining and producing military equipment and components. The machines will play a vital role in supporting defense operations by ensuring precision manufacturing standards are met. Interested vendors can reach out to Jasmine Johnson at Jasmine.1.Johnson@dla.mil or call 804-279-5094 for further details regarding this presolicitation opportunity.
    AUGMENTOR NOZZLE SE
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Oklahoma City, is soliciting quotations for the procurement of "Augmentor Nozzle SE" products. This opportunity involves both production quantities and first article testing, with two bid options available: Bid A, which requires first article submissions for testing, and Bid B, which does not. The Augmentor Nozzle SE is critical for military operations, necessitating suppliers to be Export Control certified for access to related drawings and compliance with federal regulations regarding quality assurance and environmental standards. Interested vendors should direct inquiries to the primary contact, 430 SCMS, via email at 430scms.afmc.rfiresponses@us.af.mil, or to Kristine Bruhwiler at kristine.bruhwiler@us.af.mil, with the RFQ dated January 31, 2025, outlining the detailed requirements and specifications.
    CMM Hexagon Repair
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is seeking contractors to perform repairs on a Hexagon Global Advantage 9.12.8 Coordinate Measurement Machine (CMM) located at Tinker Air Force Base in Oklahoma. The primary objective of this procurement is to address a malfunction in the PH10-C controller, which turns off during scanning, requiring comprehensive repairs, including the replacement of defective components and the provision of on-the-job training for staff. This equipment is critical for ensuring precision in measurement and quality control within defense operations, highlighting the importance of maintaining operational integrity and safety standards. Interested contractors should reach out to Brian Eakers at brian.eakers@us.af.mil or Keith Russ at keith.russ@us.af.mil for further details, as adherence to safety protocols and timely communication is essential throughout the contract period.
    Market Survey/RFI - Crossett Flux Scaffolding Tower Assessment - FAA/US Forrest Service
    Buyer not available
    The Department of Transportation, specifically the Federal Aviation Administration (FAA), is conducting a market survey for a Request for Information (RFI) regarding the assessment of the Crossett Flux scaffolding tower, which is owned by the U.S. Forest Service (USFS). The selected contractor will be responsible for a comprehensive evaluation, mapping, and structural analysis of the tower, ensuring compliance with national safety and engineering regulations, including OSHA standards and TIA-222 Rev. H guidelines. This assessment is crucial for determining the tower's viability for USFS use and identifying necessary maintenance efforts, with collaboration expected between the contractor, the FAA Logistics Center, and local USFS personnel. Interested parties can reach out to Raymond Lena at raymond.a.lena@faa.gov or Kristen Kendrick at kristen.n.kendrick@faa.gov for further details. The project will be funded by the FAA, and travel expenses will be reimbursed according to federal regulations.
    ARSR4 Data Extraction Assembly
    Buyer not available
    The Department of Transportation, specifically the Federal Aviation Administration (FAA), is seeking qualified small businesses to provide materials and services for the ARSR-4 Data Extraction Assembly project. This procurement involves the modification and assembly of components critical to the Air Route Surveillance Radar (ARSR-4) system, ensuring compliance with federal standards and operational efficiency in aviation safety. The project emphasizes the use of Commercial-Off-The-Shelf (COTS) parts and includes specific requirements for packaging, labeling, and shipping of the assemblies to the FAA’s Logistics Center. Interested parties must submit their quotes by March 5, 2025, with a firm-fixed-price contract expected to be awarded shortly thereafter. For further inquiries, contact Scott Roberson at scott.roberson@faa.gov.
    Tool Etching System
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is seeking quotations for a Tool Etching System under solicitation number FA4427-25-Q-1027, with a focus on small business participation. The procurement aims to establish a Firm Fixed Price contract for a fiber laser marking station that meets specific technical requirements, primarily for marking aircraft maintenance tools and specialty equipment to enhance accountability and compliance with Air Force quality assurance standards. The selected system will replace the current manual etching process, ensuring reliability and efficiency in tool management for maintenance tasks related to C-5, C-17, and KC-46 aircraft. Interested vendors must submit their quotes by February 26, 2025, at 12:00 PST, and are required to register in the System for Award Management (SAM) while adhering to federal regulations. For further inquiries, potential offerors can contact SrA Joseph Restua-Perez at joseph.restuaperez@us.af.mil or Vitaliy Kim at vitaliy.kim.1@us.af.mil.
    F108 Stage 1 Fan Blade Repair 005-010 (please respond by 24 February 2025 at 4:00 PM CST)
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is seeking qualified contractors for the finishing repairs of the F-108/CFM 56-2A/B Stage 1 Fan Blade, with a focus on parts associated with NSN 2840-01-196-6053PN. The procurement will be executed through a Firm-Fixed-Price Blanket Purchase Agreement, and interested parties are encouraged to demonstrate their capabilities, experience, and qualifications related to the repair process by submitting documentation by February 24, 2025. This opportunity is critical for maintaining the operational readiness of aerospace components, and potential contractors must comply with established technical and quality assurance standards as outlined in the associated Repair Data List and Repair Qualification Requirements. For further inquiries, interested businesses can contact Jaqueline Hughes at jaqueline.hughes@us.af.mil or Bridgette Miles at bridgette.miles@us.af.mil.
    CNC CMM Calibration and Repair Tools
    Buyer not available
    The Department of Defense, specifically the Department of the Air Force, is seeking to procure CNC/CMM calibration and repair tools through a combined synopsis/solicitation. The procurement includes a variety of specialized equipment compatible with the existing Renishaw operating system, such as the XM60 Multi Axis Calibrator Kit and various fixturing kits, totaling 32 specific items required for precision alignment and maintenance of CNC/CMM machinery. This initiative underscores the Air Force's commitment to enhancing operational efficiency and precision in its manufacturing processes, reflecting the critical nature of maintaining high standards in equipment calibration. Interested vendors should direct inquiries to Hugo Ruano Gutierrez at hugo.ruanogutierrez.1@us.af.mil or Hideo Mera at hideo.mera.2@us.af.mil, with offer submissions due by 1500 MT on March 4, 2025.
    F-100 Nozzle Augmenter Ex
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency, is seeking proposals for the acquisition of 734 F-100 Nozzle Augmenter Ex units, which are critical safety components for military aircraft. The procurement requires adherence to specific specifications and includes first article and qualification assessments, with delivery timelines ranging from March 31, 2025, to June 30, 2026. This solicitation is significant due to the military application of the technology, and it is not set aside for small businesses, with restrictions on foreign participation. Interested vendors should submit proposals by the closing date of March 12, 2025, and may contact Jeremy Bryant at jeremy.bryant@us.af.mil or 405-855-7112 for further information.