Roller and Flap Gate Fabrication, Winfield Lock and Dam, Winfield, WV
ID: W9123725R0002Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW072 ENDIST HUNTINGTONHUNTINGTON, WV, 25701-5000, USA

NAICS

Fabricated Structural Metal Manufacturing (332312)

PSC

IRON AND STEEL PRIMARY AND SEMIFINISHED PRODUCTS (9640)

Original Source

https://sam.gov/opp/c8b8a452fffa4fc6a7b75f5bb2bdbc77/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Army through the Huntington District, is soliciting proposals for the fabrication of flap and roller gates for the Winfield Lock and Dam under solicitation number W91237-25-R-0002. This procurement aims to secure fabricated structural metal products essential for the operation and maintenance of the lock and dam infrastructure, which plays a critical role in waterway management and navigation. Proposals must be submitted through the PIEE system, and interested parties can direct inquiries to James Holstein at james.m.holstein@usace.army.mil or Kristin Blake at KRISTIN.D.BLAKE@USACE.ARMY.MIL. The solicitation details and attachments are available via the provided link, with no specific funding amount or deadline mentioned in the overview.

    Files
    No associated files provided.
    Similar Opportunities
    Replace Back Channel Hydraulic Dam Gate Cylinders
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers (USACE), is soliciting proposals for the replacement of hydraulic dam gate cylinders at the Emsworth Locks and Dams on the Ohio River in Pennsylvania. The project entails the purchase and installation of twelve hydraulic cylinders, the integration of a new network card in the control system for cylinder sensor interfacing, and the removal and disposal of the existing cylinders. This initiative is crucial for enhancing the hydraulic functions of the dam, ensuring compliance with federal regulations, and improving infrastructure reliability. Interested contractors should note that a site visit was held on December 4, 2024, and can access further details through the PIEE posting link provided. For inquiries, contact Shantae Mollison at shantae.m.mollison@usace.army.mil or Connie Ferguson at connie.l.ferguson@usace.army.mil.
    Skiatook Low flow and Wet Well Gates
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Army, is soliciting proposals for the Skiatook Low Flow and Wet Well Gates project located at Skiatook Lake, Oklahoma. This procurement aims to award a firm-fixed price contract utilizing the Best Value Trade Off (BVTO) method, focusing on the construction and maintenance of water supply facilities as outlined in the project specifications. The successful contractor will be responsible for delivering a solution that meets the government's requirements while providing the best overall value. Interested firms should contact Kordel Tyler at kordel.m.tyler@usace.army.mil or call 918-669-4981 for further details regarding the solicitation process.
    Elk City Repair Gates
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers – Tulsa District, is seeking qualified contractors for the Elk City Gate Repair project located at Elk River in Elk City, Kansas. This sources sought announcement aims to gather information on the capabilities and qualifications of potential contractors to perform a design-bid-build project involving the fabrication, removal, and installation of roller chain assemblies for service gates, with an estimated construction price range between $1,000,000 and $5,000,000. The project is crucial for maintaining the operability of the gates, ensuring safety and functionality in the region. Interested firms must respond by 2:00 PM CST on January 10, 2024, and can direct inquiries to Tyler Godwin at tyler.l.godwin@usace.army.mil or by phone at 918-669-7281.
    Interlock Control System Replacement at Maxwell Locks and Dam
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers (USACE) Pittsburgh District, is seeking proposals for the replacement of the interlock control system at Maxwell Locks and Dam on the Monongahela River. The project entails the procurement and installation of a new valve interlock control system, which includes various components such as cables, limit switches, control panels, and hydraulic equipment, all designed to meet the Inland Marine Transportation System (IMTS) Minimum Interlock Control Standard. This upgrade is critical for ensuring the safe and efficient operation of the lock chambers, which are staffed and operational year-round. Interested Service-Disabled Veteran-Owned Small Businesses (SDVOSB) must submit their proposals by 11:00 AM ET on January 28, 2025, and can direct inquiries to Aaron Barr at aaron.m.barr@usace.army.mil or Connie Ferguson at connie.l.ferguson@usace.army.mil.
    LOCK AND DAM 25 DOWNSTREAM APPROACH GUIDE CELL U.S. ARMY CORPS OF ENGINEERS, ST. LOUIS DISTRICT
    Active
    Dept Of Defense
    The U.S. Army Corps of Engineers, St. Louis District, is seeking contractors for the construction of the Lock and Dam 25 Downstream Approach Guide Cell. This project falls under the NAICS code 237990, which pertains to Other Heavy and Civil Engineering Construction, and involves the construction of radar and navigational facilities. The guide cell is crucial for ensuring safe navigation and operational efficiency in the waterway system. Interested contractors can reach out to Whitney Dee at whitney.r.dee@usace.army.mil or 314-331-8621, or Catherine Hansen at catherine.a.hansen@usace.army.mil or 314-331-8520 for further details. The notice is currently in the presolicitation phase, and additional information regarding timelines and funding will be provided as the procurement process progresses.
    Lake Washington Ship Canal Small Lock Emergency Closure System Sources Sought
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers, is seeking information from qualified contractors regarding the installation of a new emergency closure system at the Hiram M. Chittenden Locks in Seattle, Washington. The project aims to enhance safety by providing a reliable mechanism to prevent water loss in the event of damage to the lock miter gates, addressing inadequacies in the current system that pose risks to divers during emergencies. This construction project falls under the NAICS code 237990 and has an estimated value between $1 million and $5 million. Interested firms must submit a capabilities package by January 3, 2025, to McKenna Rain at mckenna.t.rain@usace.army.mil, and must be registered in the System for Award Management (SAM) to be eligible for future contract awards.
    ROUGH RIVER DAM SAFETY MODIFICATION PHASE II: NEW OUTLET WORKS AND CUTOFF WALL PROJECT
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers, is soliciting proposals for the Rough River Dam Safety Modification Phase II project, which involves the construction of new outlet works and a cutoff wall at the Rough River Reservoir in Falls of Rough, Kentucky. The procurement aims to enhance the safety and structural integrity of the dam, addressing critical geological and hydrological challenges identified in previous assessments. This project is vital for maintaining the dam's operational capacity and ensuring compliance with federal safety regulations. Interested contractors must submit their proposals electronically by March 20, 2025, with the total contract value estimated between $250 million and $500 million. For further inquiries, contact Adyson Medley at adyson.medley@usace.army.mil or call 502-315-6211.
    LOCK AND DAM 25 NEW 1,200 FT LOCK NAVIGATION AND ECOSYSTEM SUSTAINABILITY PROGRAM (NESP) - Sources Sought, Request for Information, Industry Day and Interviews
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers (USACE) St. Louis District, is seeking interested businesses capable of constructing a new 1,200 ft Lock for Lock and Dam 25, located approximately 61.5 river miles upstream from St. Louis. This procurement aims to enhance navigation and ecosystem sustainability as part of the broader Navigation and Ecosystem Sustainability Program (NESP). The construction of this lock is critical for maintaining efficient waterway transportation and supporting ecological health in the region. Interested parties must register for the Industry Day and one-on-one sessions by June 17, 2024, and respond to the Request for Information by June 26, 2024. For further inquiries, contact Whitney Dee at whitney.r.dee@usace.army.mil or Angie Grimes at angie.l.grimes@usace.army.mil.
    PRESOLICITATION SYNOPSIS - Pickwick Lock Sector Gear Fabrication
    Active
    Dept Of Defense
    Presolicitation Synopsis - Pickwick Lock Sector Gear Fabrication: The Department of Defense, specifically the Department of the Army, is planning to procure the fabrication and delivery of one set of replacement components for the lower miter gate operating machinery at Pickwick Lock in Counce, TN. This service is typically used for maintaining and operating the lock system. The solicitation announcement will include the specifications and is expected to be posted at a later date. The delivery of the components is required within 365 calendar days after contract award. This procurement falls under the Total Small Business Set-Aside category, with a NAICS code of 333612 and a size standard of 750 employees.
    INDUSTRY DAYS –ALBENI FALLS DAM REPLACEMENT SPILLWAY GATES
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Corps of Engineers, is hosting two Industry Days for the Albeni Falls Dam Replacement Spillway Gates Project in Oldtown, Idaho. The objective is to engage with potential contractors regarding the fabrication and installation of new vertical lift steel spillway gates, which are critical for the dam's operation and maintenance. This project is significant as it aims to replace aging infrastructure to ensure the safety and efficiency of the dam's operations. Interested vendors must pre-register for the onsite event by January 22, 2025, and can contact Jeannette Patton at jeannette.k.patton@usace.army.mil or Daisy Douglas at daisy.p.douglass@usace.army.mil for further information. The contract solicitation is anticipated to be awarded in FY26, with a focus on small businesses as part of the total small business set-aside initiative.