Aircraft Tow Tractors
ID: N6852025R0008Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYFLEET READINESS CENTERPATUXENT RIVER, MD, 20670, USA

NAICS

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing (333924)

PSC

MODIFICATION OF EQUIPMENT- AIRCRAFT LAUNCHING, LANDING, AND GROUND HANDLING EQUIPMENT (K017)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/a31b1fb9ceb64c61bee32fe22a999a26/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy's Fleet Readiness Center, is seeking proposals for the procurement of two Aircraft Tow Tractors under solicitation number N6852025R0008. The requirement includes specific technical specifications such as a maximum height of 35 inches for the tractors, ensuring compliance with operational constraints, and delivery is expected within 365 days post-award. This procurement is a total small business set-aside, emphasizing the government's commitment to promoting participation from small and minority-owned businesses. Interested parties must submit their quotes by October 28, 2024, at 4:00 PM Eastern Standard Time, and should direct inquiries to Jenna Lang at jenna.l.lang2.civ@us.navy.mil or Alex Julian at alexander.m.julian2.mil@us.navy.mil.

    Files
    Title
    Posted
    Attachment A.docx
    The document specifies that the height of the aircraft tug must not exceed 35 inches from the ground to the highest point of the rear section. This requirement is essential, as it serves to ensure compliance with operational or spatial constraints relevant to the tug’s functionality in specific settings. By imposing a height limit, the RFP likely aims to facilitate the safe maneuvering and effective use of the aircraft tug within designated areas. The mention of a diagram indicates a visual reference to clarify this height restriction further. Overall, this requirement reflects the government's intent to standardize equipment dimensions for safety and efficiency in aviation operations.
    Solicitation N6852025R0008.pdf
    The document is a federal Request for Proposal (RFP) for the procurement of two Aircraft Tow Tractors intended for the Fleet Readiness Center Southwest. Issued on October 10, 2024, the solicitation number is N6852025R0008, with a deadline for offers set for October 28, 2024, at 4:00 PM local time. The scope of work identifies the Government's requirement for these tractors, including specific technical specifications such as weight capacity, safety features, and delivery timelines (within 365 days post-award). The RFP includes clauses that govern contract terms, such as inspection, acceptance, and delivery responsibilities, detailing that inspections will be conducted by the Government upon delivery. Compliance with technical specifications is paramount, and it highlights the use of various regulations concerning small businesses, emphasizing participation by service-disabled veteran-owned and other minority-owned organizations. This document serves as a formal solicitation under federal standards, geared towards ensuring fair competition and adherence to regulatory frameworks within government contracting, promoting transparency and accountability in funding governmental projects.
    Lifecycle
    Title
    Type
    Aircraft Tow Tractors
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Rental and Maintenance of Four (4) 3-Ton Forklifts, One (1) 7.5-Ton Forklift and One (1) 12.5-Ton Forklift UPDATED: Solicitation close date update/Updated RFQ. FAQ uploaded current 12/17/2024
    Active
    Dept Of Defense
    The Department of Defense, specifically the Portsmouth Naval Shipyard, is seeking proposals for the rental and maintenance of four 3-ton forklifts, one 7.5-ton forklift, and one 12.5-ton forklift under Solicitation Number N3904025Q2891. The procurement aims to ensure operational readiness and compliance with safety standards for the equipment, which is essential for material handling operations at the shipyard. This opportunity is set aside for small businesses and requires that all vendors be registered with the System for Award Management (SAM). Proposals are due by January 2, 2025, and interested parties should contact Kyle Wilkinson at kyle.j.wilkinson4.civ@us.navy.mil or call 207-994-4753 for further details.
    TROLLEY,MONORAIL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the repair of Trolley and Monorail systems. The procurement aims to ensure the operational readiness of these systems, which are critical for overhead traveling crane and hoist operations within military applications. The contract will require a Repair Turnaround Time (RTAT) of 175 days, with specific quality assurance and inspection protocols to be followed. Interested contractors should submit their quotes, including pricing and capacity constraints, to Joseph D. Weaver at joseph.d.weaver22.civ@us.navy.mil by the specified deadline.
    Allied Marine Crane Davit Model D5700CT
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Fleet Logistics Center Norfolk, is seeking qualified small businesses to provide an Allied Marine Crane Davit Model D5700CT for the TSV-4 Narragansett. The procurement aims to acquire a davit with specific robust specifications, including a maximum height of 78 inches, a safe working load capacity of 5700 lbs, and an electric hydraulic power unit, among other components, to ensure operational readiness of naval equipment. This acquisition is critical for maintaining the functionality of maritime operations, with a required delivery lead time of approximately 13-14 months. Interested vendors must submit their quotes by 10:00 AM EDT on January 3, 2025, and can direct inquiries to Shamekia Pierre at shamekia.m.pierre.civ@us.navy.mil or Christopher Whiteside at christopher.d.whiteside2.civ@us.navy.mil.
    TOWBAR MOTOR VEHICLE -- 2540
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking sources for the procurement of 915 units of motor vehicle towbars, identified by National Stock Number (NSN) 2540-01-434-8595. Interested suppliers are requested to provide information regarding their manufacturing capabilities, business size under NAICS code 336390, and their ability to meet delivery timelines while adhering to compliance requirements, including RFID packaging. This procurement is crucial for maintaining the operational readiness of military vehicles, and suppliers are encouraged to complete the attached market survey by January 10, 2025, to facilitate the development of a realistic solicitation. For further inquiries, suppliers may contact Contract Specialist Jacob McGee at jacob.mcgee@dla.mil.
    30--ACTUATOR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking to procure three units of an actuator, identified by NSN 7H-3040-016466813-X5, under a presolicitation notice. The procurement is set aside for small businesses, as indicated by the Total Small Business Set-Aside (FAR 19.5), and the contract will be negotiated with only one source due to the government's inability to reverse engineer the part or obtain the necessary data from other sources. Interested parties have 45 days to express their interest and capability to meet the requirement, with proposals being considered for a competitive procurement process, although the government retains discretion over whether to proceed competitively. For further inquiries, interested vendors can contact Duana Cloyd at (717) 605-5722 or via email at DUANA.CLOYD@NAVY.MIL.
    REQUEST FOR INFORMATION(RFI)/SOURCES SOUGHT – Fabrication, Assembly, Inspection, Test and Delivery of Transport Trailers
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Surface Warfare Center (NSWC) Crane Division, is seeking information from potential sources for the fabrication, assembly, inspection, testing, and delivery of two Transport Trailers. These trailers, which include components such as a flatbed trailer, environmental control unit, bulkhead, roll tarp, and stands, are intended to support future fielding requirements and will require Air Transportability Test Loading Agency (ATTLA) certification prior to delivery. This procurement is part of market research to inform the acquisition strategy for a Firm-Fixed-Price contract, with responses due by 4 PM Eastern Time on January 31, 2025. Interested parties should contact Ben Harrison at benjamin.k.harrison2.civ@us.navy.mil for further details and must be registered in the System for Award Management (SAM) to participate.
    CN25 Forklifts Rental
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting quotes for the rental of CN25 forklifts at Andersen Air Force Base in Guam. The procurement aims to secure 10K and 25K standard forklifts for a rental period from January 20 to March 5, 2025, under a Total Small Business Set-Aside initiative. This opportunity is crucial for supporting operational logistics at the base, ensuring efficient material handling during the specified timeframe. Interested vendors must submit their quotes via email by January 3, 2025, and ensure they are registered in the System for Award Management (SAM) to be eligible for consideration. For further inquiries, vendors can contact TSgt Benjamin Albers at Benjamin.albers@us.af.mil or 671-366-6608.
    59--TOW CABLE,LITTORAL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the manufacture of TOW CABLE, LITTORAL, under a firm-fixed-price contract. The procurement aims to fulfill specific quality and design requirements, ensuring that the supplied items meet stringent military standards, including compliance with ISO 9001 and MIL-STD-129 for marking and packaging. These cables are critical components for naval operations, emphasizing the importance of quality and reliability in their production. Interested vendors must submit their proposals by December 20, 2024, and can direct inquiries to Amber Wale at 717-605-2541 or via email at amber.l.wale.civ@us.navy.mil.
    16--TRIM SERVO ASSY,AIR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of three Trim Servo Assemblies for aircraft, identified by NSN 7RH 1680 014967283 and P/N CU09609253. This procurement is classified as a limited source requirement, with the expectation that only one acceptable offer will be received, although LPTA (Lowest Price Technically Acceptable) procedures will be utilized if multiple qualified sources submit proposals. The items are critical components for aircraft operations, necessitating Government Source Approval prior to award, and interested vendors must submit their proposals via email to Dana Scott at dana.l.scott14.civ@us.navy.mil by the specified deadline. For further inquiries, potential bidders can contact Dana Scott at 215-697-0273 or via the provided email address.
    Total Small Business Set Aside for Repair of Two (2) Forklifts, as requested in attachments.
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Surface Warfare Center, is seeking qualified small businesses to provide repair services for two John Deere forklifts located at the Panama City Beach facility in Florida. The contract will require the contractor to perform maintenance tasks, including two 3,000-hour services, oil leak repairs, and EGR valve replacements, all while adhering to strict safety, security, and environmental protocols. This procurement is critical for maintaining operational efficiency and compliance within military standards, emphasizing the importance of timely and quality service. Interested vendors must submit their quotes via email to Jessica Clark by the specified deadline, ensuring compliance with all outlined requirements, including the provision of a CAGE code and lead time for services.