ROD, WELD, BARE
ID: N0010424QFF00Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

NAICS

Welding and Soldering Equipment Manufacturing (333992)

PSC

MISCELLANEOUS WELDING, SOLDERING, AND BRAZING SUPPLIES AND ACCESSORIES (3439)

Original Source

https://sam.gov/opp/d286180dc78a4a97b77d9bab8acea7f3/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of bare welding rods, classified under the NAICS code 333992. The materials are critical for shipboard systems, where the use of incorrect or defective items could lead to severe consequences, including personnel injury or loss of vital shipboard systems. Interested vendors must adhere to stringent quality assurance and certification requirements, with a delivery timeline of 365 days from contract award, and are encouraged to submit their proposals by the extended deadline of October 25, 2024. For further inquiries, potential bidders can contact Benjamin Spangler at 717-605-2147 or via email at benjamin.spangler@navy.mil.

    Point(s) of Contact
    Telephone: 7176052147
    BENJAMIN.SPANGLER@NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    ROD, WELD, BARE
    Currently viewing
    Solicitation
    Similar Opportunities
    Custom 465 welding wire
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division, is seeking to procure 500 pounds of Custom 465 stainless steel welding wire, with a diameter of 0.062 inches, to support its Procurement Manufacturing & Test Department in Lakehurst, NJ. The wire must comply with Aerospace Material Specification (AMS) 5936 standards and be packaged in precision layer wound spools of 25 pounds each, with material certification required to confirm compliance. This procurement is critical for ensuring high-quality welding materials within the aerospace sector, with a required delivery date set for August 31, 2025. Interested small businesses must submit their quotations electronically by 5:00 PM EST on January 22, 2025, to Jeff Chelston at jeffrey.m.chelston.civ@us.navy.mil, adhering to all specified requirements outlined in the solicitation.
    BAR,METAL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of metal bars as part of a critical shipboard system. The contract requires the manufacturing of rolled steel shapes, adhering to stringent quality assurance and inspection standards due to the material's essential role in ensuring operational safety and reliability. This procurement is classified as a total small business set-aside, with a closing date for submissions extended to January 15, 2025. Interested vendors can reach out to Karen Palm at 717-605-4066 or via email at KAREN.PALM@NAVY.MIL for further details.
    FILLER, WELD (COVERED ELECTRODE)
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Maritime - Portsmouth), is seeking quotations for the procurement of covered welding electrodes, specifically 1,200 pounds of filler weld material, under a total small business set-aside. The procurement emphasizes compliance with stringent specifications outlined in the T9074-BC-GIB-010/0200 document, which details the technical requirements for welding electrodes used in high tensile and low-alloy steel applications, ensuring quality control and performance standards are met. This opportunity is critical for maintaining the integrity of welding operations at the Portsmouth Naval Shipyard, with a submission deadline for quotes set for January 17, 2025. Interested vendors must register in the System for Award Management (SAM) and can direct inquiries to Jannell Moriarty at jannell.moriarty@dla.mil or by phone at 207-438-6395.
    ELECTRODE
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the procurement of electrodes under a federal contract. The primary objective is to manufacture and supply electrodes that meet specific design, material, and dimensional requirements as outlined in the solicitation. These electrodes are critical components used in various welding and soldering applications, ensuring the operational readiness of naval equipment and systems. Interested vendors are encouraged to reach out to John A. Masters at 717-605-1213 or via email at JOHN.A.MASTERS15.CIV@US.NAVY.MIL for further details, with proposals expected to be valid for 60 days following the closing date of the solicitation.
    53--STUD,CONTINUOUS THR
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of continuous thread studs, classified under the NAICS code 332722. The contract aims to secure 1,000 units of these critical fasteners, which are essential for shipboard systems, ensuring safety and operational integrity; any defects could lead to severe consequences, including personnel injury or loss of vital systems. Interested vendors should note that the desired delivery time is set at 90 days, with a required delivery of 300 days, and the solicitation has been extended until January 21, 2025. For further inquiries, potential bidders can contact Ashton K. Perry at 717-605-7574 or via email at ashton.k.perry.civ@us.navy.mil.
    STUD,CONTINUOUS THR
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of continuous thread studs, classified under NAICS code 332722. The items are critical components intended for use in shipboard systems, where the integrity of the materials is paramount to prevent serious personnel injury or loss of vital systems. Interested vendors must adhere to stringent quality assurance requirements and provide certifications for the materials supplied, with a total contract quantity allowing for a variation of -5%. The deadline for submission of bids is not specified, but interested parties can contact Francine A. Pomells at 717-605-3354 or via email at francine.a.pommells.civ@us.navy.mil for further details.
    STUD,CONTINOUS THRE
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of continuous thread studs, classified under the NAICS code 332722. The contract aims to secure high-quality fasteners that are critical for shipboard systems, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of life. Interested vendors must adhere to stringent quality assurance requirements and provide certifications for the materials supplied, with a total contract quantity allowing for a variation of -5%. For inquiries, potential bidders can contact Francine A. Pomells at 717-605-3354 or via email at francine.a.pommells.civ@us.navy.mil, with the submission deadline and further details outlined in the solicitation documents.
    STUD,CONTINUOUS THR
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of continuous thread studs, classified under NAICS code 332722. The contract involves the supply of critical materials that will be utilized in shipboard systems, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of life. Interested vendors must adhere to stringent quality assurance requirements and provide certifications for the materials supplied, with a total contract quantity allowing for a variation of -5%. For inquiries, potential bidders can contact Francine A. Pomells at 717-605-3354 or via email at francine.a.pommells.civ@us.navy.mil. The procurement is set to follow emergency acquisition flexibilities, and the delivery timeline is established at 365 days from contract award.
    BAR METAL ROUND LEVEL 1
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Maritime - Puget Sound), is soliciting bids for the procurement of Level 1 bar metal round materials, specifically copper-nickel alloy, under solicitation number SPMYM225Q0383. Contractors must comply with stringent quality assurance requirements, including adherence to ISO-9000 standards and submission of various certification and inspection reports, such as Ultrasonic Test Reports and Liquid Penetrant Test Reports, to ensure material integrity and traceability. This procurement is critical for military applications, emphasizing the importance of high-quality materials in supporting national defense initiatives. Interested vendors must submit their quotes by January 28, 2025, at 1 PM PST, and can direct inquiries to Lina Cruz at Lina.1.Cruz@DLA.MIL or by phone at 360-813-9267.
    34--SOLDERING-DESOLDERI
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of soldering and desoldering equipment under the NAICS code 333992. This solicitation aims to acquire miscellaneous welding, soldering, and brazing supplies and accessories, which are critical for various defense applications. The contract will be awarded on a fixed-price basis, and interested vendors must submit their quotes prior to the specified closing date, ensuring compliance with all technical and quality requirements outlined in the solicitation documents. For further inquiries, potential bidders can contact Colin O'Brien at 717-605-5769 or via email at COLIN.OBRIEN1@NAVY.MIL.