BAR,METAL
ID: N0010425QFE12Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

NAICS

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding (331491)

PSC

BARS AND RODS, NONFERROUS BASE METAL (9530)

Original Source

https://sam.gov/opp/197fdbfa8b1846678ac9aa5167a4727f/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of nonferrous metal bars and rods, particularly copper-nickel alloy materials. The contract requires the delivery of high-quality materials that will be utilized in critical shipboard systems, emphasizing the importance of compliance with stringent quality assurance and inspection standards to prevent failures that could jeopardize personnel safety and operational integrity. Interested vendors must adhere to specific manufacturing and testing requirements, including ultrasonic testing and certification of compliance, with a delivery timeline of 365 days post-acceptance of material. For inquiries, potential bidders can contact Amanda L. Bailey at 717-605-3354 or via email at AMANDA.L.BAILEY50.CIV@US.NAVY.MIL.

    Point(s) of Contact
    Telephone: 7176053354
    AMANDA.L.BAILEY50.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    BAR,METAL
    Currently viewing
    Solicitation
    Similar Opportunities
    Metals
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is seeking small businesses to participate in a Blanket Purchase Agreement (BPA) for nonferrous metal products, specifically bars and rods, under solicitation N6833525Q0321. This procurement aims to streamline the acquisition of essential materials to support various naval operations, including Aircraft Launch and Recovery Equipment and Common Support Equipment. Interested vendors are invited to submit their capabilities statements, including their Cage Code and Unique Entity Identifier (UEID), by March 11, 2026, to be considered for the BPA, which has a master dollar limit of $4,999,999 over five years. For further inquiries, vendors can contact Karin Quagliato at karin.a.quagliato.civ@us.navy.mil or by phone at 240-587-2339.
    48--ROD,OPERATING
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting bids for the procurement of Operating Rods, classified under the NAICS code 332919 for Other Metal Valve and Pipe Fitting Manufacturing. The materials required are critical for shipboard systems, where the use of incorrect or defective components could lead to severe consequences, including personnel injury or loss of the vessel. Interested vendors must adhere to stringent quality assurance and certification requirements, with a focus on compliance with various military specifications and standards. For further inquiries, potential bidders can contact Noelle M. Smith at 717-605-3992 or via email at NOELLE.M.SMITH10.CIV@US.NAVY.MIL, with submissions expected to follow the outlined guidelines and timelines.
    BRAZING ALLOY,SILVE
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the supply of brazing alloy, specifically silver, under a federal contract. The procurement aims to secure high-quality materials essential for critical shipboard systems, where the use of incorrect or defective materials could lead to severe operational failures and safety risks. This contract is particularly significant as it involves special emphasis materials that require stringent quality assurance and compliance with various specifications and standards. Interested vendors should contact Lydia M. Shaloka at 215-697-4717 or via email at LYDIA.M.SHALOKA.CIV@US.NAVY.MIL for further details, and note that the solicitation closing date has been extended, with specific delivery schedules and compliance requirements outlined in the solicitation documents.
    NUT,UNION
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting bids for the procurement of Union Nuts under the NAVSUP Weapon Systems Support Mechanicsburg office. This contract requires the delivery of specialized materials that are critical for shipboard systems, emphasizing the need for high-quality standards to prevent failures that could lead to serious safety risks. The selected contractor will be responsible for ensuring compliance with stringent inspection and certification requirements, with a delivery timeline of 365 days from the award date. Interested vendors should contact Francine A. Pomells at 717-605-3354 or via email at francine.a.pommells.civ@us.navy.mil for further details and to submit their proposals.
    HX: Tube; Metallic
    Dept Of Defense
    The Department of Defense, through the Portsmouth Naval Shipyard, is soliciting proposals for the procurement of 2,000 linear inches of 3/8 OD 0.049" wall MIL-T-16420 copper-nickel alloy metallic tubes under a Total Small Business Set-Aside. This solicitation, identified as N0010425RX19757, requires vendors to demonstrate technical capability, including Non-Destructive Testing procedures, compliance with quality standards, and a delivery schedule of 50 weeks after receipt of order. Proposals must be submitted via email to the primary contact, Sarashea Thibodeau, by October 28, 2025, at 08:00 AM ET, and will be evaluated based on the Lowest Price Technically Acceptable criteria. Interested vendors must be registered in SAM.gov and provide evidence of past performance on relevant projects completed within the last five years.
    48--ROD,OPERATING
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of Operating Rods, classified under the NAICS code 332919 for Other Metal Valve and Pipe Fitting Manufacturing. The materials required are critical for shipboard systems, where the use of incorrect or defective components could lead to severe consequences, including personnel injury or loss of the vessel. Interested vendors must adhere to stringent quality assurance and certification requirements, with a focus on compliance with various military specifications and standards. For inquiries, potential bidders can contact Noelle M. Smith at 717-605-3992 or via email at NOELLE.M.SMITH10.CIV@US.NAVY.MIL, with submissions expected to follow the outlined guidelines and deadlines as specified in the solicitation documents.
    Nickel Niobium
    Dept Of Defense
    The Defense Logistics Agency (DLA) is seeking proposals for a firm-fixed-price, indefinite delivery requirements contract for nickel niobium alloy, essential for steel production. The procurement aims to secure a reliable supply chain, with a total requirement exceeding 1.4 million pounds over a five-year period, and mandates strict compliance with material specifications, testing protocols, and packaging standards. This contract is particularly significant as it ensures the availability of nickel niobium, which is critical for various defense applications. Proposals are due by December 15, 2025, at 5:00 PM EDT, with questions accepted until November 25, 2025, at 10:00 AM EDT. Interested vendors should contact Charli Soren at charli.soren@dla.mil or (804) 980-5168 for further details.
    ELBOW,PIPE
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of pipe elbows, classified under the NAICS code 332919. The procurement involves the manufacture and delivery of 2-inch, 90-degree long radius elbows made from a 70/30 copper-nickel alloy, which are critical components for shipboard systems, ensuring safety and operational integrity. The contract requires adherence to stringent quality assurance standards, including First Article Testing and compliance with various military specifications, with a delivery timeline extending up to 365 days post-contract award. Interested vendors should direct inquiries to Christian Valdez at 717-605-3229 or via email at CHRISTIAN.M.VALDEZ4.CIV@US.NAVY.MIL, and must be prepared to meet the requirements outlined in the solicitation.
    BOLT,SHAFT
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the manufacture of a BOLT, SHAFT, under the NAVSUP Weapon Systems Support Mechanical office. This procurement requires compliance with specific material and physical standards, including the prohibition of mercury contamination, as the items are intended for use on submarines and surface ships. The contract emphasizes quality assurance and inspection responsibilities, with a delivery timeline of 90 days post-award. Interested vendors can reach out to Jennifer Henry at 717-605-2172 or via email at JENNIFER.HENRY@NAVY.MIL for further details and to access the solicitation documents.
    NUT,UNION
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of Union Nuts, classified under the NAICS code 332919 for Other Metal Valve and Pipe Fitting Manufacturing. The materials required are critical for shipboard systems, where the use of incorrect or defective components could lead to severe operational failures and safety risks. The contract will involve stringent quality assurance measures, including certifications and inspections, to ensure compliance with military specifications, with a delivery timeline of 365 days post-award. Interested vendors should direct inquiries to Lydia M. Shaloka at 215-697-4717 or via email at LYDIA.M.SHALOKA.CIV@US.NAVY.MIL, and must adhere to the submission guidelines outlined in the solicitation.