Scissor Table Lifts
ID: FA8125-25-Q-0046Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8125 AFSC PZIMATINKER AFB, OK, 73145-3303, USA

NAICS

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing (333924)

PSC

WAREHOUSE TRUCKS AND TRACTORS, SELF-PROPELLED (3930)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/a69baa8ddb694cb99589b7bb3135401d/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Air Force, is seeking proposals from qualified vendors for the procurement of scissor table lifts to be delivered to Tinker Air Force Base in Oklahoma. The requirements include six electrically powered scissor lift tables with a lift capacity of 1,500 pounds, specific platform dimensions not exceeding 36" x 54", and a minimum travel height of 108 inches, extending to 144 inches. These lifts are crucial for enhancing operational efficiency and safety in equipment handling at the facility. Interested small businesses must respond to the solicitation by April 7, 2025, at 10:00 AM CST, and can direct inquiries to Paula Perry or Sheridan Robison via their respective email addresses at the Air Force.

    Point(s) of Contact
    Paula Perry
    paula.perry@us.af.mil
    Sheridan Robison
    sheridan.robison@us.af.mil
    Files
    Title
    Posted
    Item Description for Scissor Table Lifts.pdf
    The memorandum from the Department of the Air Force at Tinker Air Force Base outlines a funding request by the AMXG Group for the acquisition of six scissor lift tables. The specified requirements include a lift capacity of 1,500 pounds, minimum and maximum platform dimensions, and a minimum travel height of 108 inches with a full extension of 144 inches. The equipment must be electrically powered, feature a 10-foot control lead, and be towable over paved roads. Additionally, it should be maneuverable by one person and capable of being lifted by a forklift while withstanding wind forces up to 25 mph when fully extended. Delivery is requested to be made to Tinker AFB. The procurement aligns with the government's effort to enhance operational efficiency and safety in handling equipment at the facility.
    Questions and Answers.pdf
    The document addresses technical specifications related to a request for proposals (RFP) regarding a lift table intended for outdoor use. Key requirements include maximum platform and base dimensions of 36" x 54", with an emphasis on the platform not exceeding these sizes; a double high scissor table design is deemed unacceptable. The lift table must be towable using a lunette eye hitch, capable of being pulled by a tug or tractor for up to one mile at speeds between 5 to 10 mph, with castors deemed sufficient for this purpose. Additionally, the design should accommodate forklift access for safe lifting without damage. While the lift table must withstand wind forces of 25 mph when extended, safety measures such as railings or harness attachments are not necessary since it will not carry personnel. The specifications ensure compliance with operational requirements for effective outdoor usage while prioritizing durability and safety during handling.
    Solicitation - FA812525Q0046.pdf
    The document outlines a solicitation for Women-Owned Small Business (WOSB) contracts, specifically regarding the provision of scissor table lifts at Tinker Air Force Base. It includes the details of the requisition, including contract numbers, delivery schedules, and specific requirements for the procurement process. Notably, the acquisition is set aside for WOSB, emphasizing the government's commitment to supporting small businesses. Key elements include items needed, payment methods, and delivery instructions, along with mandatory compliance with various Federal Acquisition Regulation (FAR) clauses. The contractor is expected to manage deliveries using specific gates on the base and adhere to security requirements, such as ID badge protocols. The document also includes authorities for an ombudsman to resolve concerns and outlines inspection procedures upon delivery. Overall, it signifies the government's structured approach to purchasing, ensuring transparency and support for small businesses while adhering to regulatory standards.
    Lifecycle
    Title
    Type
    Scissor Table Lifts
    Currently viewing
    Solicitation
    Scissor Table Lifts
    Presolicitation
    Similar Opportunities
    Revised - NEW DOOSAN BOBCAT BC30S-7 36V ELECTRIC 6,000 LB. CAPACITY FORKLIFT Robins AFB
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking quotes for the procurement of one new Doosan Bobcat BC30S-7 36V electric forklift with a 6,000 lb. capacity, to be delivered to Robins Air Force Base in Georgia. The procurement requires specific configurations, including a UL Rated Type EE, oil-cooled disc brakes, a two-stage standard wide-view mast, and a 36 Volt, 1190 AH battery with a three-phase, 480V charger, along with a warranty covering both standard and powertrain components. This forklift is essential for operational efficiency at the base, and the delivery is expected within 180 days after award. Interested vendors must submit their quotes by December 15, 2025, and can direct inquiries to Margaret Gaskill or Valerie Evans via email for further information.
    25--CAB,TRUCK LIFT
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking quotes for the procurement of two truck lift units, identified by National Stock Number (NSN) 2510016167872. The solicitation is a Request for Quotation (RFQ) and requires delivery to DLA Distribution within 157 days after order placement, with the approved source being 1NWY2 EP-0008276. These truck lifts are critical components for vehicular equipment, ensuring operational efficiency and safety in military logistics. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    FORKLIFT
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a Hyster H70A Lift Truck with a nominal capacity of 7,000 lbs, as outlined in a Combined Synopsis/Solicitation notice. The lift truck features a Yanmar 2.1L Turbocharged Diesel engine, a three-stage full free lift mast, and various heavy-duty specifications, making it suitable for warehouse operations at Fort Drum, NY. This equipment is critical for enhancing operational efficiency and safety in material handling tasks. Interested small businesses are encouraged to reach out to Robert Leonard at robert.l.leonard111.civ@army.mil or call 706-544-8658 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    17--HOISTING UNIT,AIRCR
    Dept Of Defense
    The Defense Logistics Agency (DLA Troop Support) is seeking quotes for the procurement of a hoisting unit, specifically the NSN 1730015939054, under a total small business set-aside. The requirement includes the delivery of one unit to the DLA Distribution Depot in Oklahoma within 167 days after order, with the approved source being 1Y128 7548685-10. This hoisting unit is critical for aerospace craft launching, landing, ground handling, and servicing operations. Interested vendors must submit their quotes electronically, as hard copies of the solicitation are not available, and any inquiries should be directed to the buyer via the provided email address, DibbsBSM@dla.mil.
    Forklift Picker
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking a qualified vendor to supply and deliver a Noblelift Model OP8.5 Electric Order Picker to Fort Eustis, VA, within a 45-day timeframe. The order picker must meet specific technical requirements, including operating on a 24V lithium battery, having a lift height of at least 16.4 feet, and supporting a total load capacity of no less than 850 lbs, while incorporating essential safety features such as operator presence buttons and emergency lowering switches. This equipment is crucial for efficient warehouse operations, ensuring safe and effective material handling. Interested vendors should contact Jadeane Jones at jadeane.m.jones.civ@army.mil or call 757-878-0410 for further details, as this opportunity is set aside for small businesses under the SBA guidelines.
    LOW HEADROOM HOIST
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to provide a specialized low headroom hoist, specifically the Gardner Denver Hoist model P3NA43LPJP010AAA43, with a lifting capacity of approximately 4,300 lbs. This procurement aims to acquire a piston air hoist designed for environments with limited overhead space, featuring a pendant control for precise operation and a zinc-plated link chain for rust resistance. Interested parties should note that this opportunity is set aside for small businesses, and they can reach out to David Fortune at david.c.fortune.civ@army.mil or call 918-420-6445 for further details. The place of performance for this contract will be at the McAlester Army Ammunition Plant in McAlester, OK.
    BPA Hydraulic Lifting Equipment
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Combat Capabilities Development Command (DEVCOM), is seeking information from vendors regarding the maintenance and certification of hydraulic lifting equipment at Building 66, located in Natick, MA. The procurement aims to secure inspections, certifications, repair services, and preventive maintenance for various hydraulic equipment, including forklifts, hoists, and lifting devices. This initiative is crucial for ensuring the operational readiness and safety of equipment used by the Army. Interested vendors must submit their responses, including company details and capabilities, by 1:00 PM EST on January 8, 2026, to the primary contact, Michael Dion, at michael.a.dion11.civ@army.mil, with a copy to Brandon Rivett at brandon.j.rivett.civ@army.mil.
    Snap-On Autocrib E-Tool FX Lockers (Brand Name)
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is soliciting proposals for the procurement of Snap-On Autocrib E-Tool FX Lockers to support operations at Tinker Air Force Base in Oklahoma. The requirement includes the acquisition of six 34-drawer lockers and nine 22-drawer lockers, specifically designed for logistical and maintenance operations. This procurement is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB), with a delivery schedule of 30 calendar days from the award date. Interested vendors must submit their proposals by December 29, 2025, and can direct inquiries to Chelsie Hannah at chelsie.hannah@us.af.mil or Tran Tran at Tran.Tran.1@us.af.mil.
    25--HOIST UNIT,HYDRAULI
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking quotes for the procurement of four hydraulic hoist units (NSN 2590017242771). This solicitation is a total small business set-aside, aimed at acquiring essential vehicular equipment components that are critical for various military applications. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be provided, and all submissions must be received within 161 days after the award date. For inquiries, potential bidders can contact the DLA via email at DibbsBSM@dla.mil.
    FY26 PROCUREMENT OF AN AERIAL PLATFORM 20M FOR NAVFAC FE
    Dept Of Defense
    The Department of Defense, through NAVFAC Far East, is soliciting proposals for the procurement of one self-propelled, wheel-mounted, diesel engine-driven telescopic boom aerial platform with a minimum working height of 20 meters for use at Commander Fleet Activities Yokosuka, Japan. The platform must meet specific mandatory characteristics, including a platform capacity of at least 250 kg, compliance with JIS or ISO standards, and various safety and operational features, with delivery required within 600 calendar days from the award date. This procurement is particularly significant as it supports the operational capabilities of the U.S. Navy in the region. Interested vendors, especially Women-Owned Small Businesses, must submit their quotes in Japanese Yen by January 19, 2026, and are encouraged to direct inquiries to primary contact Yuka Yabuta at yuka.yabuta.ln@us.navy.mil or secondary contact Amanda Jo at amanda.jo.civ@us.navy.mil.