53--WASHER,FLAT
ID: SPE4A624U0045Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA AVIATIONRICHMOND, VA, 23237, USA

PSC

HARDWARE AND ABRASIVES (53)

Original Source

https://sam.gov/opp/75a506a2fbf44bd99d5fe54c0aaedb97/view
Timeline
    Description

    The Department of Defense, specifically the Defense Logistics Agency, is seeking to procure a flat washer. A flat washer is a type of hardware used to distribute the load of a threaded fastener, such as a bolt or screw, and prevent damage to the surface being fastened. The procurement is for NSN 5310016177566 and includes a quantity of 119 units. The delivery is expected within 84 days. This solicitation may result in an Automated IDC (Indefinite Delivery Contract) with a contract/order term of one year or until the aggregate total of orders reaches $250,000. The estimated number of orders per year is 4, with a guaranteed minimum quantity of 17. The items will be shipped to various CONUS and OCONUS DLA Depots. The approved source for this procurement is AL48N 233005. The solicitation is an RFQ and quotes must be submitted electronically.

    Point(s) of Contact
    Questions regarding this solicitation should be emailed to the buyer listed in block 5 of the solicitation document which can be found under the Additional Information link. If the Additional Information link does not work, please go to https://www.dibbs.bsm.dla.mil/Solicitations/ and type the solicitation number in the Global Search box.
    DibbsBSM@dla.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    53--WASHER,FLAT
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    WASHER,FLAT
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of flat washers, classified under the NAICS code 332722 for Bolt, Nut, Screw, Rivet, and Washer Manufacturing. The washers are critical components intended for use in shipboard systems, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of vital systems. Interested vendors must adhere to stringent quality assurance requirements, including compliance with ISO-9001 standards, and are required to submit a certificate of compliance certifying that the items meet all procurement specifications. For further inquiries, potential bidders can contact Ashton K. Perry at 717-605-7574 or via email at ashton.k.perry.civ@us.navy.mil.
    53--WASHER,PLATE
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of NSN 5310-01-204-3095, specifically a washer plate, with a total quantity of 2,854 units required for delivery. This procurement is critical for maintaining operational readiness and ensuring the availability of essential hardware components used in various defense applications. Interested vendors are encouraged to submit their quotes electronically, as hard copies of the solicitation will not be provided, and all submissions must be received within the specified timeframe. For inquiries, potential bidders can reach out via email to DibbsBSM@dla.mil, and further details can be accessed through the DLA's solicitation portal.
    53--WASHER,LOCK
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of a lock washer, specifically NSN 5310-01-695-2484, with a requirement for four units to be delivered to DLA Distribution. This procurement is critical for maintaining operational readiness and ensuring the reliability of military equipment, as lock washers are essential components in securing fasteners. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be available, and all submissions must be received within 171 days after the award date. For inquiries, potential bidders can contact the DLA via email at DibbsBSM@dla.mil.
    Seeking Sources for a Flat Washer for the MK 27 MOD 0 Tool Set
    Buyer not available
    The Department of Defense, specifically the Naval Surface Warfare Center (NSWC) Indian Head Division, is seeking potential sources for a flat washer intended for use with a lock screw on a small adjustable spanner wrench. The procurement focuses solely on materials, with the flat washer required to meet specific engineering and material specifications, including compliance with MIL-DTL-19595D and various ASME standards. This washer is critical for ensuring the functionality and reliability of the tool set it supports. Interested parties are encouraged to submit their capability statements and relevant organizational information by April 30, 2025, to the designated contacts, Devon Gormley and Jessica Quell, via the provided email addresses.
    53--BOLT,ASSEMBLED WASH
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of NSN 5306200042431, specifically for an assembled wash bolt. The requirement includes a quantity of three units, with delivery expected within 85 days after order placement, and the potential for an Indefinite Delivery Contract (IDC) lasting one year or until the total order value reaches $250,000. These bolts are critical components in various military applications, necessitating reliable sourcing from approved suppliers. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    53--WASHER,RECESSED
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of recessed washers under solicitation number NSN 5310010932480. The requirement includes three lines of delivery to DLA Distribution Warner Robins, with quantities of 1, 62, and 2002 units, all to be delivered within 115 days after order (ADO). These washers are critical hardware components used in various military applications, ensuring the reliability and safety of equipment. Interested vendors are encouraged to submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation will not be provided.
    WASHER,RECESSED
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the manufacture of recessed washers. This procurement requires compliance with various military standards and specifications, including quality assurance and inspection protocols, to ensure that the washers meet the necessary material and physical requirements. The items are critical for military applications, emphasizing the importance of quality and reliability in defense operations. Interested vendors should contact Jennifer Henry at 717-605-2172 or via email at jennifer.henry@navy.mil for further details, with a delivery timeline of 90 days post-award.
    31--BEARING,WASHER,THRU
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of 94 units of the BEARING, WASHER, THRU (NSN 3120016871989). This solicitation is part of a total small business set-aside and aims to fulfill specific military requirements for bearings, which are critical components in various defense applications. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be provided, and the deadline for delivery is set for 171 days after the order is placed. For inquiries, potential bidders can contact the DLA via email at DibbsBSM@dla.mil.
    53--SETSCREW
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 1,672 units of NSN 5305200041190 SETSCREW. This solicitation may lead to an Indefinite Delivery Contract (IDC) with a term of one year or until the total orders reach $250,000, with a guaranteed minimum quantity of 250 units. The SETSCREW is a critical hardware component used in various applications, and items will be shipped to multiple DLA depots both within the continental United States (CONUS) and outside (OCONUS). Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil. The solicitation is available online, and hard copies will not be provided.
    53--SCREW,CAP,SOCKET HE
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of NSN 5305016994182, specifically a Screw, Cap, Socket Head, with a total quantity of 379 units required for delivery within 212 days after order. This procurement is part of an Indefinite Delivery Contract (IDC) that may last for one year or until the total orders reach $250,000, with an estimated three orders per year and a guaranteed minimum quantity of 56 units. The items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS), highlighting their critical role in supporting military operations. Interested vendors are encouraged to submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.