Macrodyne Hydraulic Press Maintenance
ID: W911KF25Q0030Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC ANADANNISTON, AL, 36201-4199, USA

NAICS

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (811310)

PSC

MAINT/REPAIR/REBUILD OF EQUIPMENT- METALWORKING MACHINERY (J034)

Original Source

https://sam.gov/opp/d98221f1ac344ff2a439828f7df682dd/view
Timeline
    Description

    The Department of Defense, specifically the Army Contracting Command at Anniston Army Depot (ACC-ANAD), has announced the cancellation of the solicitation for on-site preventive maintenance and emergency repair services for Macrodyne Hydraulic Press machines. This requirement was intended to ensure the operational readiness of the equipment through comprehensive maintenance and the provision of replacement parts, which was to be sole-sourced to Macrodyne Technologies Inc. The solicitation was originally set to close on April 28, 2025, but has been formally withdrawn as per Amendment 0001 issued on August 14, 2025. For further inquiries, interested parties may contact Crystal Hodges at 256-240-3614 or via email at crystal.l.hodges8.civ@army.mil.

    Point(s) of Contact
    Crystal Hodges
    (256) 240-3614
    crystal.l.hodges8.civ@army.mil
    Files
    Title
    Posted
    W911KF25Q0030-0001 Released.pdf
    Amendment 0001 to Solicitation W911KF25Q0030, issued by ACC-ANAD on August 14, 2025, formally cancels the original solicitation. This amendment, applicable to federal government RFPs, specifically states that its purpose is to cancel the solicitation identified by number W911KF25Q0030. All other terms and conditions of the initial document remain unchanged. The amendment also specifies that offerors must acknowledge receipt of this cancellation. This action ensures that the solicitation is officially withdrawn from consideration.
    Lifecycle
    Title
    Type
    Macrodyne Hydraulic Press Maintenance
    Currently viewing
    Solicitation
    Similar Opportunities
    ONE (1) C-FRAME HYDRAULIC PRESS
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one C-Frame Hydraulic Press. This equipment is required to meet specific operational needs and must be delivered with training, technical data, an IUID tag, shipping, installation, and foundation support. The hydraulic press is crucial for various manufacturing processes, emphasizing the importance of reliable machinery in defense logistics. Interested vendors should note that the solicitation is expected to be issued on December 20, 2024, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, potential bidders can contact Edmund Quee at edmund.quee@dla.mil or by phone at 804-279-2589.
    BPA Hydraulic Lifting Equipment
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Combat Capabilities Development Command (DEVCOM), is seeking information from vendors regarding the maintenance and certification of hydraulic lifting equipment at Building 66, located in Natick, MA. The procurement aims to secure inspections, certifications, repair services, and preventive maintenance for various hydraulic equipment, including forklifts, hoists, and lifting devices. This initiative is crucial for ensuring the operational readiness and safety of equipment used by the Army. Interested vendors must submit their responses, including company details and capabilities, by 1:00 PM EST on January 8, 2026, to the primary contact, Michael Dion, at michael.a.dion11.civ@army.mil, with a copy to Brandon Rivett at brandon.j.rivett.civ@army.mil.
    Laser Cutting Machine Preventive Maintenance
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking contractors for preventive maintenance services on laser cutting machines at the Corpus Christi Army Depot in Texas. The procurement includes maintenance, calibration, and provision of parts for the equipment, ensuring adherence to a Performance Work Statement (PWS) that outlines specific tasks such as servicing the resonator and cleaning external mirrors. This opportunity is critical for maintaining the operational efficiency and longevity of government-owned laser cutting machinery. Interested contractors should refer to the attached solicitation documentation and note that the due date for offers has been extended to December 16, 2025; inquiries can be directed to Harold "Jay" Russell Jr. at harold.w.russell.civ@army.mil or Jennifer Salyers at jennifer.l.salyers2.civ@army.mil.
    Maintenance and Repair of Manufacturing Equipment and Systems Used in Explosive and Non-Explosive Operational Environments
    Dept Of Defense
    The Department of Defense, specifically the Army, is seeking proposals for the maintenance and repair of manufacturing equipment and systems used in both explosive and non-explosive operational environments at the Crane Army Ammunition Activity in Indiana. The contract encompasses a range of services including electrical, mechanical, hydraulic, pneumatic, and robotic troubleshooting, as well as preventive maintenance and emergency repairs, all adhering to strict safety and regulatory standards. This procurement is critical for ensuring the operational readiness and safety of equipment vital to military operations, with a total contract duration of up to five years, including a base year and four option years. Interested contractors must submit their proposals by December 30, 2025, and are encouraged to attend a mandatory site visit on December 4, 2025, to enhance their understanding of the requirements. For further inquiries, contact Dustin Sexton at dustin.p.sexton.civ@army.mil or Bryce Willett at bryce.t.willett.civ@army.mil.
    INCA Microscope Maintenance
    Dept Of Defense
    The Department of Defense, specifically the Mission and Installation Contracting Command at Fort Gordon, Georgia, intends to negotiate a sole-source contract for the maintenance of INCA microscopes with Oxford Instruments America Inc. This procurement involves the repair and maintenance of specific models, including the Aztec Live Auto / Ultim Max 65 and INCA mics/x-stream, which are critical for laboratory operations. The government plans to proceed under Simplified Acquisition Procedures, with a deadline for interested parties to submit evidence of competitive capability by 0800 EST on December 15, 2025. For further inquiries, interested parties may contact Martina C. Bond at martina.bond.civ@army.mil or Tia Harris at tia.j.harris.civ@army.mil.
    HYDRAULIC TRAINING STAND
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a Hydraulic Training Stand, as outlined in a Combined Synopsis/Solicitation notice. The requirement includes a Basic Fluid Power Learning System featuring a double-sided A-Frame bench, hydraulic manifold, power supply, various hydraulic and pneumatic panels, instructional materials, and a comprehensive hand tool package for hydraulic systems. This training stand is crucial for enhancing the educational capabilities related to hydraulic systems at the McAlester Army Ammunition Plant in Oklahoma. Interested small businesses are encouraged to reach out to David Fortune at david.c.fortune.civ@army.mil or call 918-420-6445 for further details, as this opportunity is set aside for total small business participation under NAICS code 339999.
    Mobile Chemical Agent Detector (MCAD) Systems Maintenance & Support Services contract
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center (NSWC) Indian Head Division, is seeking to award a Firm-Fixed Price contract for the maintenance and support services of Mobile Chemical Agent Detector (MCAD) systems. The contractor will be responsible for troubleshooting, repair, and testing of MCAD equipment, including technical support, software installation, periodic system checks, and sensor upgrades, ensuring the operational readiness of the equipment. This contract is being pursued on a sole source basis with MESH, Inc., the original equipment manufacturer, due to the proprietary nature of the technology involved. Interested parties must submit their responses by December 30, 2025, at 4:00 PM to the designated contacts, Jessica Quell and Devon Gormley, via the provided email addresses.
    CYLINDER ASSEMBLY,A
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the repair of the Cylinder Assembly, A. This procurement requires contractors to provide firm-fixed-price quotes for the repair of the specified item, adhering to strict guidelines including a Repair Turnaround Time (RTAT) of 141 days and compliance with various military standards and inspection requirements. The Cylinder Assembly is critical for military operations, necessitating reliable and timely repair services to ensure operational readiness. Interested contractors must submit their quotes electronically to Stephanie Tran at yenstephanie.tran@navy.mil, with a deadline for submissions to be determined, and must be authorized repair sources to qualify for the contract.
    USARC J&A Redacted
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking contractors for maintenance and repair services related to equipment, as outlined in the redacted Justification and Approval (J&A) document for the USARC program. The procurement focuses on the maintenance and repair of shop equipment, which is critical for ensuring operational readiness and efficiency within military operations. The place of performance for this contract is Newport News, Virginia, and interested parties can reach out to Erin Roos, the Contract Specialist, at erin.c.roos.civ@army.mil or Angel Quander at angel.y.quander.civ@army.mil for further details. The specific funding amount and key deadlines have not been disclosed in the provided information.
    U.S. Army Contracting Command – Anniston Army Depot (CCTA-HDA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
    Dept Of Defense
    The U.S. Army Contracting Command at Anniston Army Depot is seeking innovative solutions through a Commercial Solutions Opening (CSO) aimed at modernizing its Organic Industrial Base (OIB). The procurement focuses on acquiring advanced technologies and services, particularly in areas such as automation, advanced manufacturing, and cybersecurity, to enhance the Army's operational capabilities and efficiency. This initiative is critical for maintaining military readiness and ensuring the Army's technological superiority in defense operations. Interested contractors must submit proposals by July 10, 2025, for the Automatic Storage and Retrieval System (ASRS) and by August 6, 2025, for the Oil Test Stand, with site visits scheduled for June 25 and July 15, 2025, respectively. For further inquiries, potential bidders can contact Amber Burdett at amber.e.burdett.civ@army.mil or Diana Ponder at diana.m.pritchettponder.civ@army.mil.