DOD SBIR 24.4 Annual

Active
Yes
Status
Open
Release Date
October 3rd, 2023
Open Date
October 3rd, 2023
Due Date(s)
March 31st, 2025
Close Date
March 31st, 2025
Topic No.
A244-009

Topic

Forward Looking Infrared (FLIR) Dual Band Focal Plane Array in High Definition Format

Agency

Department of DefenseN/A

Program

Type: SBIRPhase: BOTHYear: 2024

Summary

The Department of Defense (DOD) is seeking proposals for the development of a small energy-efficient self-contained transceiver capable of wireless communication without using traditional radio frequency (RF) transport. The goal is to utilize a non-standard means of signal communication, such as magnetic, acoustic, or infrared, that is difficult to detect and report in covert activities. The transceiver should be highly resistant to interference, detection, and exploitation, and be self-contained, man-portable, easily concealable, and field programmable. The project duration is divided into two phases: Phase I involves creating a plausible design and rationale supporting the solution, while Phase II focuses on developing and testing a prototype that demonstrates the desired capabilities. The project aligns with the Army's smart sensing initiatives and aims to provide an innovative alternate means of low probability of detection (LPD) and low probability of interception (LPI) communications. The solicitation is open until March 31, 2025. For more information, visit the solicitation link.

Description

OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Integrated Sensing and Cyber; Advanced Materials

 

OBJECTIVE: The U.S Army seeks to develop a small energy efficient self-contained transceiver capable of communicating between two points wirelessly without using the traditional RF transport medium. The U.S. Army is interested in developing an NRF-TAC device that can transmit and receive signaling of up to 300 meters without the use of the traditional radio frequency. The goal for the NRF-TAC solution is to utilize a non-standard means of signal communication, such as magnetic, acoustic, or infrared that is difficult to detect and report in an environment of highly covert activity. Utilization of the NRF-TAC will create new mission deployment possibilities for operation and control of remote sensors.

 

DESCRIPTION: Efficient and effective operation of an unattended Non-RF Transceiver Alternative Communicator (NRF-TAC) is needed in an environment of highly mobile activity requiring the ability to remotely communicate on-demand with a very small Size, Weight, and Power (SWAP) profile. The signal communication medium may be, but not limited to, acoustic, infrared, or ultraviolet. The messaging between NRF-TAC devices must be highly resistant to interference, detection, and exploitation to ensure consistent and stable operations. The NRF-TAC must be self-contained (i.e., require no external cabling), be man-portable, be easily concealable, and be field programmable. The NRF-TAC must be able to operate for at least 800 hours without operator intervention. The SBIR effort will be to design and build an innovative NRF-TAC prototype device capable of being demonstrated in a realistic field application. This effort aligns with multiple areas of the Army including smart sensing as well as providing an innovative alternate means of low probability of detection (LPD) and low probability of interception (LPI) communications.

 

PHASE I: The evaluation of the Phase I proposals will be based on probability of functionality, form, durability and sustainability. During Phase I, up to 5 awardees will create and deliver a plausible design to communicate wirelessly without the use of RF between two points with at least one point remotely configurable operating without external power. In the development of the design, a fully documented rationale supporting the design shall be created. The rationale shall be based on research, sound engineering, component availability and market surveys capturing a performance-based analysis including effective signaling, efficiencies in autonomous operation, maximum distance between two points and reliability. The proposed final product cost assessment shall also be provided. Each awardee shall complete Phase I by submitting the hardware design, a documented description of operation and written narrative as to the rationale supporting the solution as designed. Additionally, a proposed means of assessing performance by using test methods that include inspection, analysis, demonstrate or test for each performance factor captured in a spreadsheet, commonly referred to as a verification cross-reference matrix (VCRM).

 

PHASE II: Each Phase II awardee will develop and test a prototype that demonstrates the ability to communicate between two points without RF autonomously without external power in accordance with the TPOC-approved VCRM derived from phase I. The distance between points, as well as effective signaling will also be evaluated. The prototype system shall demonstrate the ability to deploy and sustain operations without external power or operator intervention. Operating efficiencies including longevity of operation without refresh and the programmability will also be evaluated. All awardees will complete phase II by delivering a fully documented prototype system including operating instructions, interface control document (ICD), programmability commands and characterization.

 

PHASE III DUAL USE APPLICATIONS:

Academic research has shown the efficacy of NRF sensor technology, like magnetic and infrared sensors, in environments where RF sensors’ ability is abated and needs more energy to operate.​ 
Research has further underscored that NRF sensors are preferred over RF for commercials uses like home security, automotive crash sensing, and additive manufacturing. ​ 
Current market applications, including start-up usage, for NRF-TAC include:​ 
	
		Internet of Things (IoT), which enables commercial applications like home security, healthcare, and underwater monitoring. ​ 
		Additive manufacturing, ranging from infrared and ultraviolet quality control.​ 
		Automotive and transportation industry, augmenting automobile and railroad safety as well as enabling autonomous vehicles, via infrared and acoustic sensing.  
	

 

REFERENCES:

A Novel Magnetic Induction Communication Transmitter Based on a Mechanical Antenna (02/2020, Liu, Cao, Gong) https://ieeexplore.ieee.org/document/8991013  
Tracking an LED array transmitter for visible light communications in the driving situation (09/2010, Nagura, Yamazato, Katayama, Yendo, Fujii, Okada) https://ieeexplore.ieee.org/document/5624361  
Modeling of Short-Range Ultraviolet Communication Channel Based on Spherical Coordinate System (02/2019, Wu, Ma, Su, Yuan, Cheng) https://ieeexplore.ieee.org/document/8598725  



Design and implementation of a new infrared transmitter and receiver (05/2012, Wang, Li, Zhao) https://ieeexplore.ieee.org/document/6201434 

 

KEYWORDS:  Transceiver; Non-RF; Signal Communication; Alternative Communicator; NRF-TAC; Sensors; Low Probability of Detection (LPD)

Similar Opportunities

DOD SBIR 24.4 Annual - Forward Looking Infrared (FLIR) Dual Band Focal Plane Array in High Definition Format
Department of Defense
The Department of Defense (DOD) is seeking proposals for the development of a small energy-efficient self-contained transceiver capable of wireless communication without using traditional radio frequency (RF) transport. The goal is to utilize a non-standard means of signal communication, such as magnetic, acoustic, or infrared, that is difficult to detect and report in covert activities. The transceiver should be highly resistant to interference, detection, and exploitation, and be self-contained, man-portable, easily concealable, and field programmable. The project duration is divided into two phases: Phase I involves creating a design and rationale supporting the solution, while Phase II focuses on developing and testing a prototype. The final product should be fully documented and include operating instructions, interface control documents, and programmability commands. The potential impacts of this technology include new mission deployment possibilities for remote sensor operation and control, as well as applications in areas such as home security, healthcare, additive manufacturing, and automotive safety. The deadline for proposal submission is March 31, 2025. For more information, visit the solicitation agency's website [here](https://www.defensesbirsttr.mil/SBIR-STTR/Opportunities/).
DOD SBIR 24.4 Annual - Non-RF Transceiver Alternative Communicator (NRF-TAC)  
Department of Defense
The Department of Defense (DOD) is seeking proposals for the Non-RF Transceiver Alternative Communicator (NRF-TAC) through its SBIR program. The U.S. Army is interested in developing a small, energy-efficient, self-contained transceiver that can wirelessly communicate between two points without using traditional radio frequency (RF) transport. The NRF-TAC device should be capable of transmitting and receiving signaling up to 300 meters using non-standard means such as magnetic, acoustic, or infrared, which are difficult to detect and report in covert activities. The device should be easily concealable, field programmable, and able to operate for at least 800 hours without intervention. The Phase I of the project will involve the creation and delivery of a plausible design, while Phase II will focus on developing and testing a prototype. The project aligns with the Army's smart sensing initiatives and aims to provide an innovative means of low probability of detection (LPD) and low probability of interception (LPI) communications. The solicitation is open until March 31, 2025. For more information, visit the [SBIR topic link](https://www.sbir.gov/node/2496865) or the [solicitation agency website](https://www.defensesbirsttr.mil/SBIR-STTR/Opportunities/).
DOD SBIR 24.4 Annual - Non-RF Transceiver Alternative Communicator (NRF-TAC)  
Department of Defense
The Department of Defense (DOD) is seeking proposals for the Non-RF Transceiver Alternative Communicator (NRF-TAC) through its SBIR program. The U.S. Army is interested in developing a small, energy-efficient transceiver that can wirelessly communicate between two points without using traditional radio frequency (RF) transport. The NRF-TAC device should be capable of transmitting and receiving signals up to 300 meters using non-standard means such as magnetic, acoustic, or infrared communication. The goal is to create a communication method that is difficult to detect and report in covert activities, enabling new mission deployment possibilities for remote sensor operation and control. The NRF-TAC should be self-contained, easily concealable, field programmable, and able to operate for at least 800 hours without intervention. The SBIR effort involves designing and building an innovative NRF-TAC prototype for realistic field application. Phase I involves creating a design with a documented rationale, while Phase II focuses on developing and testing a prototype. The potential applications of NRF sensor technology include home security, automotive crash sensing, additive manufacturing, and IoT. The solicitation is open until March 31, 2025. For more information, visit the [solicitation link](https://www.sbir.gov/node/2496865).
DOD SBIR 24.4 Annual - Lightweight Longwave Bolometer Sensor Components
Department of Defense
The Department of Defense (DOD) is seeking proposals for the topic "Lightweight Longwave Bolometer Sensor Components" as part of the SBIR program. The objective of this topic is to develop components that enable low size, weight, and power (SWAP) thermal bolometer-type longwave thermal sensor payloads. These components should have equal or better performance than current commercial offerings while driving down SWAP. The components of interest include lens, focal plane, and readout and processing embedded hardware. The components should be ready for integration into a camera module by the end of Phase II. Thermal longwave infrared (LWIR) capabilities are crucial for many Army applications, especially for small Unmanned Aircraft Systems (UAS). However, the size, power, and weight constraints often limit the performance of these sensors. This topic aims to develop components that reduce the weight of thermal payloads while increasing their capabilities and keeping unit costs low. The project will have a Phase I and Phase II, with Phase I proposals accepting a cost of up to $250,000 for a 6-month period of performance. During Phase I, firms should design a proposed component with stakeholder input, analyze the SWAP-C impact of the component, and discuss how it will support the objective sensor payload. Phase II will involve completing the component design, fabricating, testing, and characterizing the component for integration into a lightweight sensor payload. Firms will also refine the design, define relevant interfaces, and lay out a high-level plan for integration. The potential applications of this research include smartphone camera augmentation, UAV camera augmentation, home security systems, and climate tech development. The project references academic research on bolometer manufacturing methods and the efficacy of leveraging colloidal quantum dots (QDs) for IR light sensing. Military contractors have also contributed to the research in the LWIR sensor and bolometer manufacturing spaces. For more information and to submit proposals, visit the DOD SBIR 24.4 Annual solicitation notice on grants.gov or the DOD SBIR/STTR Opportunities page. The open date for proposals is October 3, 2023, and the close date is March 31, 2025.