The Department of Defense, specifically the Department of the Air Force, is conducting market research to identify potential sources for a high-speed, high dynamic range thermal imaging system. This system is intended to operate in the medium-wavelength infrared (MWIR) band and is crucial for advancing research capabilities at the Air Force Institute of Technology (AFIT), particularly in graduate optical engineering labs and ongoing defense-centered projects. Interested firms are required to submit a capability statement electronically to the designated contacts by December 15, 2025, at 11:00 AM EST, with all submissions becoming government property and subject to specific formatting guidelines. For further inquiries, interested parties can reach out to Danara Barlow at danara.barlow@us.af.mil or Jessica Stamper at jessica.stamper.2@us.af.mil.

**Sources Sought Synopsis:**  
**\*\*This is not a solicitation\*\***  
The Government is conducting Market Research, in accordance with FAR Part 10, to identify possible sources for a high-speed, high dynamic range, thermal imaging system. This Sources Sought is **solely** for information and planning purposes. The intended purpose is to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements below. It **does not** constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Furthermore, the Government is **NOT** at this time seeking proposals, and will not accept unsolicited proposals. Respondents are advised that the Government will not pay for any information or administrative costs incurred in response to this Sources Sought. Please be advised that all submissions become Government property and will not be returned. All costs associated with responding to this Sources Sought will be solely at the responding party’s expense. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. It is the responsibility of the interested parties to monitor this beta.SAM.gov website for additional information pertaining to this Sources Sought.

Capability Statement: All interested firms shall submit a response demonstrating their capabilities to produce the requested equipment to the primary points of contact listed below.

**Acceptable Means of Submission: All submissions must be submitted electronically to Danara Barlow at danara.barlow@us.af.mil and Jessica Stamper at jessica.stamper.2@us.af.mil by 15 December 2025, 11:00AM EST**

Any correspondence sent via email must contain the subject line, “**THERMAL IMAGER**.” This correspondence must be contained in a single email, unless otherwise approved, and must not exceed five megabytes, including attachments. Emails with compressed files will not be accepted. Note that email filters at Wright-Patterson Air Force Base are designed to filter emails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the email may not get through the email filters. Also, be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc,

**REQUIREMENTS**

**Background:**  
AFIT's Center for Technical Intelligence and Research (CTISR) requires a high-speed, high dynamic range, thermal imaging system that operates in the medium-wavelength infrared (MWIR) band. This capability, and its associated software, would be a significant advancement in technology level compared to AFIT's current thermal imaging capabilities. This new capability would be advanced enough to enable new research, but would also be available to use in AFIT's graduate optical engineering labs OENG 616 and student thesis research. This combination of dynamic range, along with extremely high speeds, represents a new capability that will  
immediately enable new defense-centered research and improve the results of on-going projects.  
**Minimum Technical Requirements:**  
The following specification lists the minimum (threshold) requirements for the HDR M700:  
1. 25 mm, 50 mm, and 200 mm focal length options  
2. Dynamic range greater than 800 degrees C at recorded live  
3. Spectral range 3-5 microns  
4. Threaded lens mount  
5. Calibration of lens camera combination  
6. Delivery of all calibration data to include camera/lens spectral response curves in csv format  
7. Frame rate greater than 600 Hz full frame  
8. Protective case for lens', instrument, and computers  
9. Maximum frame rate greater than 35 kHz  
10. Minimum focal length of less than 5 meters for all optics  
11. Real time temperature calibration  
12. Aperture size F/4  
13. Minimum exposure time 1 microsecond or less for full frame rate  
14. Operating temperature -10 C to 45 C  
15. FPA size at least 640x512  
16. Computer controller included

**Delivery and Training:**  
Delivery is required by the earliest possible delivery date, not to exceed 90 calendar days after receipt of Award. Training is not required for this requirement. Installation is not required for this requirement.

Delivery address is Wright Patterson AFB, OH

**Warranty:**  
All parts must be free from defects in material and workmanship, under normal and proper use in accordance with the user manual, for the period of one calendar year after receipt of delivery.

Buyer

NAICS

PSC

Original Source