One (1) Sodick ALN600G-TH Wire Electrical Discharge Machine (EDM)
ID: 25-13-1301Type: Sources Sought
AwardedJul 24, 2025
Award #:SPE4A8-25-P-0165
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA AVIATIONRICHMOND, VA, 23237, USA

NAICS

Cutting Tool and Machine Tool Accessory Manufacturing (333515)

PSC

ELECTRICAL AND ULTRASONIC EROSION MACHINES (3410)

Original Source

https://sam.gov/opp/d2618fe20467492eb1950a47af6f6860/view
Timeline
    Description

    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research for the procurement of one Sodick ALN600G-TH Wire Electrical Discharge Machine (EDM), which includes turnkey services such as training and shipping/delivery. This procurement is classified under the North American Industry Classification System (NAICS) code 333515, focusing on cutting tool and machine tool accessory manufacturing, and is critical for enhancing the capabilities of the Naval Surface Warfare Center in Dahlgren, Virginia. Interested vendors are invited to submit their capabilities in response to this Sources Sought Notice by emailing avnipemarketresearch@dla.mil, with submissions not exceeding ten pages, and must be received by the specified closing date. This notice is for information purposes only and does not constitute a solicitation or commitment by the government.

    Point(s) of Contact
    Christopher Bara
    avnipemarketresearch@dla.mil
    Files
    No associated files provided.
    Similar Opportunities
    WIRE EDM
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to provide a Mitsubishi EDM Model MV4800-Wire Electrical Discharge Machine (EDM) for the McAlester Army Ammunition Plant in Oklahoma. The procurement requires a machine that meets specific technical specifications, including a minimum cutting travel of 15 inches on the X-axis, 18 inches on the Y-axis, and 16 inches on the Z-axis, along with a wire range of .006 to .012 inches and a filtration system that filters water to 5 microns. This equipment is crucial for precision machining applications within military operations. Interested small businesses are encouraged to contact David Fortune at david.c.fortune.civ@army.mil or by phone at 918-420-6445 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center outfitted with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or equivalent 6-Axis Universal Floor Type Milling Center with active dampening system equivalent to the DAS+.
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research to identify vendors capable of supplying a Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center equipped with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or an equivalent system. This procurement includes not only the milling center but also comprehensive turnkey services such as installation, removal of existing equipment, foundation work, shipping, tooling, training, and technical documentation. The equipment will be utilized at the Fleet Readiness Center-EAST in Cherry Point, North Carolina, highlighting its significance in supporting military readiness and operational capabilities. Interested parties are encouraged to submit their capabilities by emailing avnipemarketresearch@dla.mil, with responses due by the closing date of the SAM.gov posting, as this is a sources sought notice and not a formal solicitation.
    Plasma Cutting Machine
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for a Computer Numerically Controlled (CNC) Plasma Cutting Machine to be delivered and installed at the Ship Repair Facility (SRF) in Yokosuka, Japan. The procurement requires a turn-key solution that includes the machine itself, technical data, delivery, installation, and comprehensive training for operators and maintenance personnel, adhering to various federal and Japanese industrial standards. This machine is critical for enhancing the capabilities of the U.S. Naval Ship Repair Facility, ensuring efficient and precise metal cutting operations. Interested vendors should submit their capabilities and comments on the draft statement of work by emailing AVN IPE Market Research at AVNIPEMarketResearch@dla.mil, with responses due by the closing date listed on SAM.gov.
    24-13-1027 CNC UNIVERSAL MILLING MACHINE
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one DMC 270 FD Portal Series CNC Universal Milling Machine, as outlined in solicitation SPE4A8-25-R-0008. The updated requirements include significant enhancements such as an upgraded Siemens Sinumerik One CNC controller, increased spindle power from 40 horsepower to 56 horsepower, and the addition of safety features including grating and support structures in compliance with OSHA standards. This machine is critical for various manufacturing processes, including milling, turning, and profile grinding, and the contract is expected to be awarded following the extended closing date of December 23, 2025. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil.
    34--DRILLING MACHINE,UP
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of two drilling machines under solicitation number NSN 3413013154541. The requirement includes the delivery of these machines within 167 days after order, with approved sources being specified in the solicitation. These drilling machines are critical for metalworking applications and support various defense operations. Interested vendors must submit their quotes electronically, as hard copies will not be available, and any inquiries should be directed to the DLA via email at DibbsBSM@dla.mil.
    34--ENGRAVING SYSTEM
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of two engraving systems, identified by NSN 3417015526525. The requirement includes delivery to DLA Distribution San Diego within 156 days after order, with the approved source being 1GCR7 VLS3.60DT50. These engraving systems are critical for metalworking applications, ensuring precision and efficiency in military operations. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be available, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.
    22-25-1009 two(2) Fives Giddings & Lewis PT 1500 Plain Table CNC Horizontal Boring Mills (HBM) with Integrated Contouring Heads (ICH)
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one Fives PT 1500 Plain Table CNC Horizontal Boring Mill (HBM) with an Integrated Contouring Head (ICH), with an option to purchase a second unit at a later date. This procurement aims to fulfill the government's requirements for advanced machining capabilities, which are critical for operations at the Puget Sound Naval Shipyard, including tooling, training, foundation work, and equipment removal. The solicitation has been amended to extend the closing date to December 29, 2025, and requires offers to remain valid for 120 days. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil for further details.
    34--MILLING MACHINE,HOR
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of a horizontal milling machine (NSN 3417012681552) intended for delivery to the USS Gerald R. Ford (CVN 78). The contract is set aside for small businesses under the Total Small Business Set-Aside program, emphasizing the importance of supporting small enterprises in defense contracting. This milling machine is crucial for various metalworking applications within military operations, ensuring the readiness and maintenance of naval vessels. Interested vendors must submit their quotes electronically, as hard copies will not be available, and all inquiries should be directed to the primary contact at DibbsBSM@dla.mil.
    ELECTRODE,WELDING
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of welding electrodes, classified under NAICS code 333992. The procurement aims to acquire specialized welding materials that are critical for shipboard systems, where the use of incorrect or defective materials could lead to severe safety risks, including personnel injury or loss of vital shipboard systems. Interested vendors must adhere to stringent quality assurance requirements and provide certifications for compliance with military specifications, with a delivery timeline of 365 days post-contract award. For further inquiries, potential bidders can contact Benjamin Spangler at 771-229-0573 or via email at benjamin.t.spangler.civ@us.navy.mil.
    34--LATHE,ENGINE
    Dept Of Defense
    The Defense Logistics Agency (DLA Troop Support) is seeking quotes for the procurement of an Engine Lathe, identified by NSN 3416012311788. The requirement includes the delivery of one unit to DLA Distribution San Diego within 167 days after order placement, with approved sources specified for the procurement. Engine lathes are critical for various metalworking applications, supporting the operational readiness of military equipment. Interested small businesses are encouraged to submit their quotes electronically, as hard copies of the solicitation will not be available, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.