The document, titled "Flag Done," is exceptionally brief and contains only these two words. Given the context of government RFPs, federal grants, and state/local RFPs, this likely serves as a simple confirmation or status indicator within a larger, more complex document or process. Without additional context, it is difficult to ascertain the specific purpose; however, it most probably signifies the completion of a particular task, phase, or action item within a government-related project or submission workflow.

This government file details the specifications for the Small Arms Repairman Tool Kit (SARTK), identifying components like the identification plate, warning marking, inventory and warranty marking, drawer labels, padlock, tool chest, foam organizing liner, and components list. The document outlines requirements for packing, tool layout, and approval processes, emphasizing government representation in layout configuration. It specifies placement of data plates, foam liner characteristics, tool retention features, tool access, individual tool height, and the use of contrasting foam colors. Exceptions for wrench storage and padlock placement are noted. The file also includes detailed instructions for inventory and warranty marking, drawer labeling, and rigorous testing for side slope stability, impact resistance, and ambient temperature rough handling, including drop and roll tests. This comprehensive guide ensures the SARTK meets stringent quality and durability standards.

This government file details the specifications for an "IDENTIFICATION PLATE" to be used by the US Army Armament Research, Development and Engineering Center. The plate must be made from aluminum, plastic, or another non-metal material with a satin or matte finish. The background color must be black with white lettering. Adhesion must be permanent and resistant to deterioration from heat, cold, and solar radiation, as well as various chemicals like water, refrigerants, automotive oils, fuels (gasoline, diesel, JP-8, JP-4), acids, bases, coolants, alcohols, and cleaning agents. All language must be in all capital, sans-serif fonts, with specific height requirements for different fields. Any blank fields or fields marked with "X" will be defined after the contract award. The document also includes revision history and drawing approvals, indicating the plate is part of a larger system, likely for equipment identification within the US Army.

The document is a detailed engineering drawing (DWG NO. 0631A0002) for a warning marking label, likely used within the U.S. Army Armament Research, Development and Engineering Center. It outlines stringent specifications for material, finish, letter size, and color, adhering to MIL-STD-1472 and ANSI Z535.4. Key requirements include resistance to various chemicals, extreme temperatures, and solar radiation, ensuring durability and legibility. The label must feature specific sans-serif fonts and include graphical symbols. It also specifies that the label will display the total weight of the SARTK (0631A0000) system. The document includes revision history, design approvals, and material properties, indicating its use in federal procurement or contract specifications for military equipment.

This government file details the requirements for an Inventory and Warranty Marking for the SARTK tool set, likely part of a federal government RFP or contract. The marking must include diagrams, a table, and warranty information for the entire set and individual items. Diagrams need to be color photographs showing tool placement with unique find numbers. The table must correlate diagram find numbers with nomenclature, manufacturer, part number, NSN (if available), and individual item warranty. The set's warranty information requires the government contract number, manufacture date, contractor details (name, address, toll-free number, and other contact means). The materials used for the marking must be permanently affixed, resistant to heat, cold, solar radiation, peeling, and various chemicals including fuels, acids, and cleaning agents. Text must be in sans-serif capital letters (minimum 10 pt font) with a white background and black lettering/outlines, while photos/diagrams should be in color. The label size must fit within the tool chest lid and potentially under the top tray.

This government file details specifications for “DRAWER LABELS” used in the SARTK system, likely for federal procurement or grants. The labels must adhere to strict material, language, and design standards, including being made of durable, chemical-resistant material with black backgrounds and white sans-serif lettering. Each label must include “SARTK,” the drawer’s initial delivery position, and its contents. Specific examples are provided for various SARTK drawers, such as those holding screwdrivers, pliers, and sockets. The document also specifies adhesion, color, and chemical resistance requirements, ensuring the labels remain intact and legible under various conditions. Applicable standards, such as ASME Y14.100-2013 and ASME Y14.5-2009, are referenced, and final label layouts require approval in conjunction with drawing 0631A0000.

This government file is a Vendor Item Control Drawing (VICD) for a specific padlock model, 0631A0006, intended for use by the US Army. The drawing details the padlock's specifications, including its material (steel), applicable standards (CID A-A-59487-2S, ASME Y14.100-2013, ASME Y14.5-2009), and a suggested source of supply: Master Lock Company LLC. The document provides critical information for procurement, ensuring that any purchased padlocks meet the precise requirements outlined in the drawing, superseding vendor part numbers or catalog callouts. It emphasizes that changes to the drawing must be incorporated by the design activity and clarifies that the suggested vendor is not a guarantee of continued availability.

This government file details the comprehensive requirements for a tactical tool chest, part number 0631B0000, for the Combat Capabilities Development Command, Armament Center. Key specifications include exterior dimensions not exceeding 18x15x24 inches, a 3-inch deep top tray, and drawers capable of holding specific tool loads with organizing liners. Drawers must open with minimal force, resist accidental removal, and be reconfigurable in the field. The chest must have side handles rated for 250 pounds, wheels for varied terrain (paved, grass, gravel), and a telescoping handle extending to at least 41 inches, all designed for durability against impact, crushing, and extreme temperatures (-25°F to 170°F). All metal hardware must be 316 or 304 stainless steel. The chest must be stackable, impact-resistant, and operable with gloved hands. It also requires water immersion resistance (1 meter for 30 minutes), rain and dust resistance, and a subdued black, non-reflective finish. Security features include a padlock-compatible locking mechanism and a tethering provision, both designed to withstand 250 pounds of force. Approved sources of supply are Snap-On Industrial and Pelican Products, Inc.

The document details specifications for a foam organizing liner, likely for tool organization within a government or military context. Key specifications include material (closed-cell, cross-linked foam with a density of 4-6 lbs/cubic ft and low water absorption), contrasting colors (black/dark grey top, red bottom), and construction requirements for seams (no vertical seams, permanent attachment). The liner must also be resistant to a wide range of chemicals, including water, fuels, oils, acids, and cleaning agents. Thickness is determined by tool and drawer height. The document emphasizes adherence to ASME standards and indicates the drawing was CAD-maintained. This comprehensive set of requirements ensures the durability, functionality, and safety of the foam organizing liner for its intended application.

This government file, likely an attachment to a federal RFP, details the "COMPONENTS LIST, SARTK" for the US Army Combat Capabilities Development Command, Armament Center. It specifies the required tools to assemble the Small Arms Repairman Tool Kit (SARTK). The document lists 68 distinct items, including various screwdriver sets, socket sets, wrench sets, pliers, files, punches, hammers, measuring tools, and safety glasses, each with a part number, CAGE code, and quantity. The file also notes that tool layouts are for reference only and may change based on the brand, with negotiations occurring post-award. Applicable standards cited are ASME Y14.100-2013 and ASME Y14.5-2009. The document is approved for public release, indicating its public procurement nature.

This government file, identified as Drawing Number 0631D1000, details a "Jewelers Screwdriver Set" for the US Army Combat Capabilities Development Command Armaments Center. The document specifies a matched set of seven jewelers' screwdrivers, including various flat-tip sizes and one cross-tip screwdriver, all with plastic handles. Key details include the contractor (CAGE Code 59678), design activity, and approval dates. The drawing indicates that all items in the set must be of the same brand and manufacturer. Revisions to the product baseline and engineering change proposals are noted with their respective dates. The document emphasizes adherence to ASME Y14.100-2013 and ASME Y14.5-2009 standards. This technical drawing serves as a procurement or manufacturing specification for a specialized tool set within a federal government context.

This government file, identified by drawing number 0631D1002, outlines the specifications for a 7-piece screwdriver set for the US Army Combat Capabilities Development Command Armaments Center. The document details each screwdriver's type, size, and part number, emphasizing that all items must be a matched set from the same manufacturer and brand. It references applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009 for design and engineering. The file includes revision history, with the latest update on 2024-12-17, and states that the drawing was generated from a CAD model, with changes to be incorporated by the design activity. This file serves as a procurement or manufacturing specification for a specific tool kit within the federal government's supply chain.

This document is a technical drawing for a 1/4" drive tool set, identified as PART NO. 0631D1003, intended for the US Army Combat Capabilities Development Command Armaments Center. It details the components of the set, including a reversible ratchet, various extensions, a speeder, a socket adapter, and a universal joint, all of which must be from the same manufacturer and brand. The drawing includes revision history, design approvals, and specifies applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. It also states that the drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This file serves as a detailed specification for procurement or manufacturing, ensuring standardization and quality control for the tool set within a federal government context.

This government file, likely an engineering drawing or a part of a federal procurement document, details a 1/4" drive, 12-point socket set, identified by contract number 0631D1004 and CAGE Code 59678. The design activity is the US Army Combat Capabilities Development Command Armaments Center. The document specifies individual sockets within the set, including 5mm, 6mm, 7mm, 8mm, and 10mm sizes, each with its own part number and quantity of one. Key notes emphasize that all items in the set must be a matched set from the same manufacturer and brand. Applicable standards include ASME Y14.100-2013 and ASME Y14.5-2009. Revisions to the document are noted, with the latest being an ECP K24O3004 on 2024-12-17. The document is approved for public release with unlimited distribution.

This government file details a "SOCKET SET, 1/4" DRIVE, 12 PT" with drawing number 0631D1005, dated 2018-03-09, and revised on 2024-12-17. The set, developed by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER, Rock Island, Illinois, includes seven distinct 1/4" drive, 12-point sockets ranging from 3/16" to 3/8". Key specifications mandate that all items must be a matched set from the same manufacturer and brand. The document adheres to ASME Y14.100-2013 and ASME Y14.5-2009 standards. This drawing was CAD-maintained and generated from a solid model, with changes to be incorporated by the design activity. This file serves as a technical specification within a federal procurement context for standardized military equipment.

This document, identified as Drawing No. 0631D1006 and approved for public release, details a 3/8" drive, 12-point socket set for the US Army Combat Capabilities Development Command Armaments Center. The drawing, generated from a solid model, specifies the set's components, including individual sockets ranging from 3/8" to 11/16". Key revisions include a product baseline in 2018 and an ECP in 2024. The document emphasizes that all items in the set must be of the same brand and manufacturer to ensure a matched set, adhering to ASME Y14.100-2013 and ASME Y14.5-2009 standards. This technical drawing serves as a critical reference for procurement and manufacturing within federal government contracts, ensuring standardization and quality control for military equipment.

This government file details the specifications for a "SOCKET SET, 3/8" DRIVE, 6-PT" under contract number 0631D1007, assigned to the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER in Rock Island, Illinois. The drawing, dated 2018-03-09, outlines a set of six deep sockets ranging from 7/16" to 3/4", all with a 3/8" drive and 6-point design. A key requirement states that all items in the set must be a "matched set" from the "same brand" and "same manufacturer." The document also lists applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009) and details revision history, including a product baseline error correction and an ECP. This document is approved for public release with unlimited distribution.

This document outlines the specifications for a 3/8" drive, 12-point socket set, identified by contract number 0631D1008 and CAGE code 59678. The set, designated for the US Army Combat Capabilities Development Command Armaments Center, Rock Island, Illinois, includes thirteen individual sockets ranging from 10 MM to 22 MM. Key requirements state that all items must be a matched set from the same manufacturer and brand. The document details drawing approvals, revisions (including a product baseline in 2018 and an ECP in 2024), and applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. This drawing was generated from a solid model and is CAD maintained.

The document details a SOCKET SET ASSY, HEX BIT, identified by part number 0631D1009, for the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. This drawing, generated from a solid model and CAD maintained, specifies a set of seven hex bit sockets with varying drive sizes (3/8" and 1/2") and bit sizes (3/16" to 9/16"). Key requirements include that all items must be a matched set from the same brand and manufacturer. The document outlines applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009) and lists revisions, including a product baseline update in 2018 and an ECP in 2024. This technical drawing is approved for public release, indicating its use in federal government procurement or inventory.

This government file details a Socket Set Assembly, 1/2" Drive, 6 PT, identified by part number 0631D1010, designed by the US Army Combat Capabilities Development Command Armaments Center. The assembly, approved for public release, includes five specific sockets ranging in size from 3/4" to 1". Key specifications require all items to be a matched set from the same manufacturer and brand. The document also lists applicable standards, ASME Y14.100-2013 and ASME Y 14.5-2009. Revisions to the product baseline and an ECP are noted, with the most recent approval date being 2024-12-17. This drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

This document is a detailed engineering drawing for a "SOCKET SET ASSY, 1/2" DRIVE, 6 PT," designated with part number 0631D1011. It outlines the components of the socket set, including various millimeter-sized sockets (12mm to 24mm), all specified as 1/2" drive, 6-point. The drawing specifies the design activity as the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER and includes approval dates and personnel. It notes that the drawing was generated from a solid model and is CAD maintained. Key specifications include applicable standards like ASME Y14.100-2013 and ASME Y 14.5-2009, and a critical note stating that all items in the set must be of the same brand and manufacturer. The document is approved for public release with unlimited distribution.

This government file details the engineering drawing for a 1/4" drive, 12-point socket set assembly (DWG NO. 0631D1012), approved for public release. It outlines design specifications, materials, and quality assurance provisions. The drawing includes details about the design activity (US Army Armament Research, Development and Engineering Center), the contractor, and approval dates from various engineers. Key components listed are a socket rail and the socket set itself. A critical note mandates that each socket rail, fully loaded, must withstand a 30-inch drop without damage or disconnection, as per Quality Assurance Provision QAP 0631E0000. The document also references applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009, indicating a focus on precise engineering and robust product quality.

This document, 0631D1013, details the specifications for a "SOCKET SET ASSY, 1/4" DRIVE, 12 PT" designed by the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER. It outlines the assembly's components, including a socket rail and socket set, and provides key information such as the contract number, size, and relevant dates. The drawing, approved for public release, includes design and quality approvals from various engineers. Critical notes include adherence to ASME Y14.100-2013 and ASME Y 14.5-2009 standards. A crucial performance requirement mandates that the socket rail, when fully loaded, must withstand a 30-inch drop without damage or disconnection. This technical drawing serves as a foundational document for procurement and manufacturing within federal government contracts, ensuring product quality and compliance.

This government file details the specifications for a "SOCKET SET ASSY, 3/8" DRIVE, 12-PT" under contract number 0631D1014, issued by the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER. The document, dated 2018-03-09, outlines the design and quality assurance provisions for the socket set, which includes a socket rail (0631D2003) and a socket set (0631D1006). Key requirements include adherence to ASME Y14.100-2013 and ASME Y 14.5-2009 standards. A critical performance test specifies that a fully loaded socket rail must withstand a 30-inch drop without damage or disconnections, as detailed in Quality Assurance Provision (QAP) 0631E0000. The drawing is CAD maintained, with changes to be incorporated by the design activity. This file serves as a comprehensive technical specification for the procurement and manufacturing of the socket set assembly.

This government file details the specifications for a "SOCKET SET ASSY, 3/8" DRIVE, 6-PT" with drawing number 0631D1015, approved for public release. The document, generated from a solid model, outlines the assembly's components, including a socket rail and socket set, both 3/8" drive and 6-point. Key specifications include adherence to ASME Y14.100-2013 and ASME Y14.5-2009 standards. A critical performance requirement states that a fully loaded socket rail must withstand a 30-inch drop without damage or disconnection. The file also provides details on drawing approvals, revisions, and the design activity, which is the US Army Armament Research, Development and Engineering Center. This document serves as a technical blueprint for manufacturing and quality assurance, aligning with federal procurement standards.

This government file, likely an attachment to a federal RFP or grant, details the specifications for a "SOCKET SET ASSY, 3/8" DRIVE, METRIC, 12 PT" under contract number 0631D1016. The document, originating from the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER, outlines the assembly's components, including a socket rail and socket set, and refers to applicable standards ASME Y14.100-2013 and ASME Y 14.5-2009. A key requirement is the socket rail drop test, mandating that a fully loaded rail withstand a 30-inch drop without damage or disconnections, with quality assurance provisions detailed in QAP 0631E0000. The file also notes that the drawing was generated from a solid model and is CAD maintained.

This government file details a Socket Set Assembly, Hex Bit (DWG NO. 0631D1017), manufactured by the US Army Armament Research, Development, and Engineering Center. The drawing, approved for public release, specifies design approvals, revisions, and applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009). Key components include a hex bit socket rail and a hex bit socket set. The document outlines a critical quality assurance provision: each fully loaded socket rail must withstand a 30-inch drop without damage or disconnections, as detailed in QAP 0631E0000. This CAD-maintained drawing emphasizes design activity for incorporating changes and highlights the rigorous testing required for the product's durability and reliability.

This government file, likely an engineering drawing or a related document for a federal contract, details the "SOCKET SET ASSY, 1/2" DRIVE, 6 PT." The document includes a contract number (0631D1018), CAGE Code (59678), and designates the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER as the design activity. Key components listed are "SOCKET RAILS, 1/2" DRIVE SET" (Part No. 0631D2007) and the main assembly (0631D1010). The drawing specifies applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009) and a critical quality assurance provision (QAP 0631E0000) for a socket rail drop test. This test requires fully loaded socket rails to withstand a 30-inch drop without damage or disconnection. The document is approved for public release, indicating its relevance to public procurement or information sharing within government projects.

This document is a technical drawing for a "SOCKET SET ASSY, 1/2" DRIVE, 6 PT" with drawing number 0631D1019, created by the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER. It details the components, applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009), and quality assurance provisions. A key requirement is that each socket rail, when fully loaded, must withstand a 30-inch drop without damage or disconnection. The document specifies the inclusion of "SOCKET RAILS, 1/2" DRIVE SET" (0631D2008) and "SOCKET SET ASSY, 1/2" DRIVE, 6 PT" (0631D1011). It also notes that the drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

This government file details a tool set, 3/8" drive, identified by contract number 0631D1020, for the US Army Combat Capabilities Development Command Armaments Center. The document, approved for public release, specifies a set of five matched items that must be from the same manufacturer and brand. These items include a 3/8" reversible ratchet, 3" and 6" 3/8" drive extensions, a 3/8" hinged socket wrench handle, and a 3/8" drive universal joint. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. It references ASME Y14.100-2013 and ASME Y14.5-2009 as applicable standards/specifications. Revisions noted include a product baseline in 2018 and an ECP in 2024.

The document details the specifications for a \"TOOL SET, 1/2\" DRIVE\" issued by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. This drawing, 0631D1021, outlines a matched set of tools, emphasizing that all components must be from the same manufacturer and brand. The set includes a 1/2-inch reversible ratchet, various 1/2-inch drive extensions (2-inch, 5-inch, 10-inch), a hinged socket wrench handle, a 1/2-inch female to 3/8-inch male socket adapter, and a 1/2-inch drive universal joint. The document also specifies applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. Revisions to the drawing are noted, with the latest being ECP K24O3004 on 2024-12-17. This file is crucial for procurement and manufacturing, ensuring consistency and quality in federal government equipment.

The document is a detailed drawing and parts list for an 11-piece punch and chisel set, identified by drawing number 0631D1022 and contract number DAI. It was created by the US Army Combat Capabilities Development Command Armaments Center in Rock Island, Illinois. The drawing specifies the individual components of the set, including various chisels and punches, each with its part number, CAGE code (59678), and quantity. Key dates for design, checking, and approval are provided, with the initial product baseline set on March 9, 2018, and a revision (ECP K24O3004) on December 17, 2024. The document also references applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. This technical drawing is approved for public release with unlimited distribution.

This government file details a Combination Wrench Set, 12 PT, identified by contract number DAI 0631D1023, designed by the US Army Combat Capabilities Development Command Armaments Center. The document specifies a set of thirteen combination wrenches, ranging in size from 5/16" to 1", all with a 12-point design. Key requirements include that all items must be a matched set from the same brand and manufacturer. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. The file also includes revision history, with the latest revision on December 17, 2024. Applicable standards are ASME Y14.100-2013 and ASME Y 14.5-2009. This document is approved for public release, with unlimited distribution.

This government file, identified as Drawing No. 0631D1024, details a "WRENCH OPEN END SET" for the US Army Combat Capabilities Development Command Armaments Center. The document, dated 2018-03-09 with a revision on 2024-12-17, outlines a matched set of double open-end wrenches of varying sizes (3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16"). Key specifications include adherence to ASME Y14.100-2013 and ASME Y 14.5-2009 standards. A critical requirement is that all items in the set must be from the same manufacturer and brand. The drawing emphasizes that it was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This file serves as a technical specification for procurement or manufacturing within a federal government context.

This government file details the specifications for a "COMBINATION WRENCH SET, METRIC, 12 PT," designated by Part Number 0631D1025, from the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. The document, dated 2018-03-09 with a revision on 2024-12-17, outlines a set of 19 metric combination wrenches ranging from 6mm to 30mm. Key requirements include that all wrenches must be a matched set from the same manufacturer and brand. The file also references applicable standards and specifications: ASME Y14.100-2013 and ASME Y 14.5-2009. This technical drawing is approved for public release and distribution is unlimited.

This government file details the specifications for a "PUNCH SET ASSY," identified by drawing number 0631D1026 and CAGE Code 59678. The document, approved for public release, includes a revision for a product baseline error and lists two main components: a "PUNCH AND CHISEL SET, 11 PC" (0631D1022) and a "TOOL POUCH, PUNCH SET" (0631D2009). The design activity is the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER, ROCK ISLAND, ILLINOIS. It specifies applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009, noting dimensions are in inches and the drawing is CAD maintained. This document serves as a technical blueprint for manufacturing or procuring this specific punch set assembly within a federal government context.

This government file, identified as Drawing No. 0631D1030, details a "BIT ASSY, 1/4" HEX INSERT BITS" developed by the US Army Combat Capabilities Development Command, Armament Center. The document, approved for public release, provides a comprehensive list of 36 different 1/4" hex drive insert bits, including various Phillips, Pozidrive, slotted, hex, Torx, and square tip bits, along with a 1/4" square drive insert bit. Each item specifies a part number, CAGE code (59678), and quantity required (1). The file also references applicable standards: ASME Y14.100-2013 and ASME Y14.5-2009, indicating compliance with engineering drawing and dimensioning standards. A revision was made on 2024-12-17 related to "ERR K24O3004." This document is crucial for procurement and engineering, outlining the specifications for a range of specialized tools for military applications.

The document is a technical drawing for a "BIT SET WITH ORGANIZER" designated as Part No. 0631D1031, manufactured by US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER. It includes details such as the contract number, size, scale, and unit weight, along with approval signatures and dates from various engineers. The drawing specifies two main components: a "BIT ASSY, 1/4" HEX INSERT BITS" and an "ORGANIZER, 1/4" INSERT BITS." Revisions are noted, with the latest dated 2024-12-17. Applicable standards include ASME Y14.100-2013 and ASME Y14.5-2009. A key note mandates that similar bits be organized by size and located near each other for inventory ease. The document is approved for public release with unlimited distribution.

This government file details the design and specifications for a "HEX KEY HOLDER" (Part No. 0631D2001), developed by the US Army Combat Capabilities Development Command Armaments Center. The document, dated 2018-03-09 with a revision on 2024-12-17, outlines the holder's material (plastic) and special features, including its capacity to hold various hex key sizes (1.5 MM to 12 MM) and a maximum length of 3 inches. It specifies applicable standards (ASME Y14.100-2013, ASME Y14.5-2009) and indicates that the drawing was generated from a CAD model. The file includes details on design approvals, engineering, and quality control, confirming its status as a publicly releasable document with unlimited distribution. This document serves as a technical specification, likely for procurement or manufacturing within a federal government context.

The document "0631D2002 SOCKET RAIL, 1/4" DRIVE SET" is a technical drawing and specification for a socket rail system, likely intended for use by the US Army Armament Research, Development and Engineering Center. It details the design, components, and performance requirements for a 1/4 inch drive socket rail set. Key specifications include the set consisting of one socket rail and seven pegs, designed to accommodate seven 1/4 inch drive sockets. The document emphasizes peg retention to maintain socket location and a drop test requirement where a fully loaded socket rail must withstand a 30-inch drop without damage. Applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009 are referenced, highlighting the engineering and quality control aspects of the product. This drawing serves as a critical document for manufacturing and quality assurance within a government procurement context.

This government file details the specifications for a 3/8-inch drive socket rail set, identified by part number 0631D2003. The set includes one socket rail and six pegs designed to hold 3/8-inch drive sockets. Key requirements specify that the rail must accommodate six sockets, maintain socket location when installed, and withstand a 30-inch drop test when fully loaded without damage or disconnection of any component. The document references ASME Y14.100-2013 and ASME Y14.5-2009 for applicable standards. This drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. The file, approved for public release, includes details on design activity, contractor, and revision history, indicating a product baseline revision on March 9, 2018.

The document details the specifications for a 3/8" drive socket rail set, contract number 0631D2004, designed for the US Army Armament Research, Development and Engineering Center. This set includes one socket rail and thirteen pegs to retain 3/8 inch drive sockets. Key requirements include the rail's length, which must accommodate thirteen sockets, and the pegs' ability to maintain socket location when installed. The socket rail must also withstand a 30-inch drop test when fully loaded with sockets without damage or disconnection. The drawing was generated from a solid model, with changes to be incorporated by the design activity. Applicable standards are ASME Y14.100-2013 and ASME Y14.5-2009. This document is approved for public release and distribution is unlimited.

The document details the specifications for a "SOCKET RAIL, HEX BIT SOCKET SET" (Part No. 0631D2005) developed by the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER. This set includes one socket rail and seven pegs designed to retain two 1/2-inch and five 3/8-inch drive sockets. Key requirements include the rail's length accommodating all sockets from drawing 0631D1009, maintaining socket location once installed, and withstanding a 30-inch drop test without damage or disconnection. The drawing emphasizes compliance with ASME Y14.100-2013 and ASME Y14.5-2009 standards. This document serves as a technical specification, likely for procurement or manufacturing, outlining the design and performance criteria for this specialized tool set within a government context.

The document details the specifications for "SOCKET RAILS, 1/2" DRIVE SET," a product designed for the US Army Armament Research, Development and Engineering Center. It outlines the technical requirements and standards for these socket rails, which are intended to retain 1/2 inch drive standard sockets. Key specifications include the need for rails to accommodate a full set of five sockets, maintain socket location when installed, and withstand a 30-inch drop test without damage or disconnection. The drawing also references applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. This document is a technical drawing providing detailed requirements for a component used by the US Army, likely for procurement or manufacturing purposes within a federal government context.

This government file, likely an engineering drawing or a related technical document, details the specifications for "SOCKET RAILS, 1/2" DRIVE SET" for the US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER. The document, identified by DWG NO. 0631D2008, outlines a set consisting of two socket rails and eleven pegs designed to retain 1/2 inch drive standard sockets. Key specifications include limiting each rail to no more than eight 1/2 inch drive sockets to reduce weight, with the rails sized to accommodate all eleven sockets divided approximately equally by weight. The design emphasizes maintaining socket location when installed and requires each fully loaded socket rail to withstand a 30-inch drop without damage or disconnection. Applicable standards, ASME Y14.100-2013 and ASME Y14.5-2009, are referenced. The document also includes revision history, approval dates, and distribution statements, indicating it is approved for public release.

This government file details the specifications for a "TOOL POUCH, PUNCH SET" for the US Army Combat Capabilities Development Command Armaments Center. The document, identified by DWG NO. 0631D2009, outlines design approvals, revisions, and key material and construction requirements. The tool pouch must be made from heavy-duty, weather-resistant material like cotton duck or vinyl-coated nylon, in olive drab or black, with a hook and loop closure. It must include a minimum of 11 storage pockets, sized to hold punches up to 9 inches long and 3/4 inch in diameter, and be designed to roll or fold for compact storage. The drawing indicates distribution is unlimited and references ASME Y14.100-2013 and ASME Y14.5-2009 as applicable standards.

This document, a drawing for a "SOCKET RAIL, 1/4" DRIVE SET," outlines the design and specifications for a socket rail assembly used by the US Army Armament Research, Development and Engineering Center. The set, identified by part number 0631D2010, consists of one socket rail and five pegs designed to retain 1/4 inch drive sockets. Key specifications include the rail length, which must accommodate five sockets, and a requirement for peg retention to maintain the socket's position. A critical performance standard is the socket rail's ability to withstand a 30-inch drop when fully loaded with sockets without damage or disconnection. The document also references applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009, and notes that the drawing was generated from a solid model, with changes to be incorporated by the design activity. This file serves as a detailed technical specification for a component likely procured through federal government RFPs, ensuring standardized manufacturing and performance.

This government drawing (DWG NO. 0631D2015) details the specifications for a "BIT ORGANIZER, 1/4" INSERT BITS." The document, approved for public release, was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. Key specifications include the material (plastic), size (to store all bits listed on drawing 0631D1030), and retention capabilities (to secure bits while allowing easy access and retention during transport). The design activity is the Combat Capabilities Development Command, Armament Center. Revisions, such as "ERR K24O3004," are noted. Applicable standards/specifications include ASME Y14.100-2013 and ASME Y14.5-2009. This document is likely a component of an RFP or government contract for the procurement or manufacturing of tool organizers.

This government file is a Source Control Drawing (drawing number 0700D0001) for a transparent plastic small parts box with 17 compartments. It outlines the specifications, applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), and approved sources for this item. The drawing specifies the nominal dimensions as 7 inches long, 4 inches wide, and 1-3/16 inches high. It also provides notes regarding approved items, the non-guarantee of continued supply from listed sources, and distribution limitations (approved for public release). Revisions to the drawing are noted, with the most recent in 2024. An approved vendor, Flambeau Plastics Div., and their corresponding part number are listed. This document is crucial for procurement and ensures that only approved and specified parts are used in relevant government applications.

This government file is a source control drawing for a "TOTE BAG" with part number 0700E0000. It details the bag's specifications, including a nominal expanded size of 12 inches length x 6 inches width x 6 inches height, special features like a zipper closing, two handles, a reinforced base, and water resistance, and a carrying capacity of 40 pounds minimum. The document also lists approved sources of supply, including C.H. Ellis Co., Snap-On Industrial, and Wright Tool Company, LLC, along with their respective part numbers and descriptions. It outlines applicable standards and specifications (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use, requiring prior approval for substitutes. The drawing was created by the US Army Combat Capabilities Development Command Armaments Center and includes revision history, drawing approvals, and distribution statements, indicating its use in federal procurement or supply chain management.

This government file is a source control drawing for a 1/4" drive, 3/16", 12-point socket. It details the design, specifications, and approved sources for this specific tool. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), emphasizing that only items described are approved for use and substitutes require prior approval. Key specifications include a maximum length of 1.01 inches, a full polish chrome finish, and a double hexagon (12-point) special feature. Approved sources include Stanley Black & Decker, Inc. DBA Mac Tools, Snap-On Industrial, and Stanley Proto Industrial, each with their respective part numbers and CAGE codes. The drawing also includes revision history, detailing changes such as product baseline updates and engineering change proposals. This document is crucial for procurement and quality control within government applications, ensuring consistency and adherence to specified tool standards.

This government file details a source control drawing for a 1/4" drive, 7/32", 12-point socket, identified as part number 0701C0002. The document specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and outlines critical notes regarding approved items, substitute parts requiring prior approval, and the non-guarantee of continued source availability. Key specifications include a maximum length of 1.01 inches, a 1/4 inch drive size, a 7/32 inch socket size, a full polish chrome finish, and a double hexagon (12-point) special feature. The drawing lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools), Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. This drawing is CAD maintained, with changes to be incorporated by the design activity. The document also includes revision history and approval dates from the US Army Combat Capabilities Development Command Armaments Center.

This government file, a source control drawing (0701C0003), details a 1/4" drive, 1/4", 12-point socket, likely for federal procurement or military applications. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and specific product requirements, including a maximum length of 1.01 inches, a full polish chrome finish, and a double hexagon (12-point) special feature. The document specifies approved sources of supply, listing vendors like SNAP-ON INDUSTRIAL, STANLEY PROTO INDUSTRIAL, STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, and WILLIAMS J H INDUSTRIAL PRODUCTS INC, along with their part numbers and CAGE codes. It emphasizes that only items described are approved, and substitutes require prior approval. The drawing also includes revision history, design activity (US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER), and various approval signatures, indicating a controlled engineering document.

This government file is a source control drawing for a 1/4" drive, 12-point socket, available in 1/4" and 9/32" sizes. It details the specifications for these sockets, including a maximum length of 1.01 inches, full polish chrome finish, and a double hexagon (12-point) special feature. The drawing lists applicable standards such as ASME B107.110 and ASME Y14.100-2017. It also identifies approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-on Industrial, and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. The document emphasizes that only items described are approved for use and that substitutes require prior approval. This file is crucial for procurement and quality control within federal government applications, ensuring adherence to design and material specifications for these specific tools.

This government file, identified as a Source Control Drawing (DWG NO. 0701C0005), details the specifications and approved sources for a 1/4" drive, 5/16", 12-point socket. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only described items are approved for use, prohibiting substitutes without prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. Key specifications for the socket include a maximum length of 1.01 inches, a 1/4 inch drive size, a 5/16 inch socket size, a full polish chrome finish, and a standard length with a double hexagon (12-point) feature, adhering to ASME B107.110, Category 1, Type I. The drawing lists several approved sources, including Stanley Black & Decker, Inc. (DBA MAC Tools), Williams J H Industrial Products Inc, Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers, CAGE codes, and vendor descriptions. The document, maintained by CAD, notes revisions and approvals by the US Army Combat Capabilities Development Command Armaments Center.

This document is a source control drawing (DWG NO. 0701C0006) for a 1/4" drive, 11/32", 12-point socket, likely for federal government procurement or use within a federal grant project. It specifies the item's design, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), and approved sources of supply. Key specifications include a maximum length of 1.01 inches, 1/4-inch drive size, 11/32-inch socket size, a full polish chrome finish, and a 12-point (double hexagon) design. The document lists multiple approved vendors, including Stanley Black & Decker, Inc. (DBA Mac Tools), Williams J H Industrial Products Inc, Snap-On Industrial, and Stanley Proto Industrial, along with their part numbers and CAGE codes. It emphasizes that only described items are approved and substitutes require prior approval. The drawing also includes revision history and distribution statement A, indicating approval for public release.

This document is a Source Control Drawing (Drawing No. 0701C0007) for a 1/4" drive, 3/8", 12-point socket, intended for use by the US Army Combat Capabilities Development Command Armaments Center. It outlines the specifications and approved sources for this specific mechanical tool. The drawing details include applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), physical specifications such as a maximum length of 1.01 inches, a 1/4-inch drive size, a 3/8-inch socket size, and a full polish chrome finish with a standard length and 12-point double hexagon special features. It also references ASME B107.110, Category 1, Type I as an applicable specification. The document explicitly states that only items described are approved for use and that substitutes require prior approval. Approved sources of supply are listed with their part numbers, vendor data, names, addresses, CAGE codes, and vendor part numbers and descriptions. Revisions to the drawing are also tracked, including product baseline and ECP updates. This drawing serves as a critical reference for procurement and quality assurance within government applications.

This government file is a source control drawing for a 1/4" drive, 5 MM, 12-point socket, detailing its specifications, approved sources, and application. It outlines the physical characteristics of the socket, including its length, drive size, socket size, and finish, as well as special features like its standard length and 12-point design. The document references applicable standards such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. It lists approved manufacturers and their corresponding part numbers and CAGE codes, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial. The drawing also specifies that only items described are approved for use, and substitutes require prior approval. This document serves as a critical reference for procurement and engineering within the US Army Combat Capabilities Development Command Armaments Center.

This government file, likely an exhibit or attachment to an RFP or contract, details a Source Control Drawing for a "SOCKET, 1/4" DRIVE, 6 MM, 12-PT." The document provides comprehensive specifications for the socket, including its length (26 mm max), drive size (1/4 inch), socket size (6 mm), finish (full polish chrome), and special features (standard length, double hexagon/12-point). It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The file also lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools), Snap-On Industrial, and Stanley Proto Industrial, complete with their part numbers, vendor data, CAGE codes, and addresses. Notes emphasize that only items described are approved for use and that source availability is not guaranteed. Revisions to the drawing are also tracked, indicating updates to the product baseline and ECPs. The overall purpose of this document is to provide a controlled and detailed specification for a specific tool, ensuring quality, compatibility, and approved sourcing within a government procurement context.

The document is a source control drawing for a 1/4" drive, 7 MM, 12-point socket, identified by part number 0701C1005. It details the product's specifications, including a maximum length of 26 MM, a full polish chrome finish, and a double hexagon (12-point) special feature. The drawing lists applicable standards such as ASME B107.110, Category 1, Type I, ASME Y14.100-2017, and ASME Y14.5-2020. Approved sources of supply are provided, including SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their respective part numbers, names, addresses, and CAGE codes. The document also includes revision history, design approval signatures, and notes emphasizing that only described items are approved for use and that source identification does not guarantee continued availability. This document is crucial for procurement and engineering, ensuring the correct specifications and approved vendors are used for this specific tool within government applications.

This government file is a source control drawing for a 1/4" drive, 8 MM, 12-point socket, identified by part number 0701C1006. The drawing specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved for use, with no substitutes allowed without prior approval. It details the socket's specifications, including a maximum length of 26 MM, a 1/4 inch drive size, 8 MM socket size, a full polish chrome finish, and a 12-point double hexagon special feature. The drawing also lists applicable specifications/standards (ASME B107.110, CATEGORY 1, TYPE I) and approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial. The document is managed by the US Army Combat Capabilities Development Command Armaments Center and includes revision history, with the latest revision in 2022.

This government file is a source control drawing for a 1/4" drive, 10 MM, 12-point socket. It details the specifications, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), and approved sources of supply for this specific tool. Key specifications include a maximum length of 26 MM, a 1/4 inch drive size, a 10 MM socket size, a full polish chrome finish, and a double hexagon (12-point) special feature. The document lists multiple approved vendors such as SNAP-ON INDUSTRIAL, STANLEY PROTO INDUSTRIAL, and STANLEY BLACK & DECKER, INC., along with their part numbers and CAGE codes. This drawing, maintained by the US Army Combat Capabilities Development Command Armaments Center, ensures that only approved items are used, emphasizing the importance of adherence to specifications and prior approval for any substitute items. The document is approved for public release, indicating its role in federal government procurement or technical documentation.

This document is a Source Control Drawing (SCD) for a 3/8-inch drive, 7/16-inch, 6-point deep socket, identified by Drawing No. 0703B0004. It outlines the specifications, applicable standards, and approved sources for this specific tool. Key specifications include a minimum length of 1.75 inches, 3/8-inch drive size, 7/16-inch socket size, a full polish chrome finish, and deep length with a single hexagon (6-point) design. The document references ASME Y14.100-2017 and ASME Y14.5-2020 for general standards, and ASME B107.110, Category 1, Type I for the tool's specific performance. Approved manufacturers include Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial, each listed with their part numbers, CAGE codes, and vendor descriptions. The document also includes revision history and critical notes regarding the use of approved items only, prohibiting substitutes without prior approval.

This government file is a source control drawing for a deep 3/8" drive, 1/2", 6-point socket, likely for federal procurement or an RFP. It outlines applicable standards, specifications, and approved sources, emphasizing that only described items are approved. The document lists two currently approved vendors: Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial, along with their respective part numbers and descriptions. Previous sources have been removed. Key specifications include a minimum length of 1.75 inches, a 3/8-inch drive size, a 1/2-inch socket size, a full polish chrome finish, and deep length with a single hexagon (6-point) special feature. The drawing also details revision history, drawing approvals, and design information from the US Army Combat Capabilities Development Command Armaments Center.

This government file is a Source Control Drawing (drawing number 0703B0006) for a 3/8" drive, 9/16", 6-point deep socket, designed by the US Army Combat Capabilities Development Command Armaments Center. It details the product's specifications, including its minimum length of 1.875 inches, full polish chrome finish, and deep length/single hexagon features. The document lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110 for the socket itself. It identifies approved sources of supply, such as Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-on Industrial, providing their CAGE codes, part numbers, and descriptions. The drawing also includes revision history and notes regarding the use of approved items and the non-guarantee of continued availability from listed sources. This document is essential for procurement and quality control within federal government applications, ensuring that only specified and compliant items are used.

This government file is a source control drawing for a deep, 3/8" drive, 5/8", 6-point socket. It details the product specifications, including a minimum length of 2.00 inches, a 3/8-inch drive size, a 5/8-inch socket size, a full polish chrome finish, and deep length/single hexagon features. The document references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It also lists approved sources of supply, including Stanley Black & Decker, Inc. dba MAC Tools, Williams J H Industrial Products Inc, Snap-On Industrial, and Stanley Proto Industrial, providing their CAGE codes, part numbers, and vendor descriptions. The drawing indicates that only described items are approved for use, and substitutes require prior approval. This document is crucial for procurement and quality assurance in government applications, ensuring standardization and reliability of parts.

This government file is a source control drawing for a deep socket, 3/8" drive, 11/16", 6-point, part number 0703B0008. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and specifies that only items described are approved for use. The drawing details the socket's specifications, including its 2.00-inch minimum length, full polish chrome finish, and deep length/single hexagon features. It lists approved sources, vendor part numbers, and CAGE codes, such as Snap-on Industrial and Stanley Proto Industrial. The document includes revision history, with the latest update on 2024-12-17. This technical drawing is crucial for procurement and quality control within federal government applications, ensuring adherence to precise standards for specialized tools.

This government file, identified as Source Control Drawing 0703B0009, details the specifications and approved sources for a specific tool: a deep, 3/8-inch drive, 3/4-inch, 6-point socket. The document is crucial for federal government RFPs as it outlines the exact requirements for this item, including applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, and specific dimensional and finish criteria. It lists multiple approved sources and their corresponding part numbers, such as Snap-on Industrial and Stanley Proto Industrial, ensuring that only specified items are used. The file also includes revision history and approval dates, emphasizing strict quality control and design adherence. This document serves as a definitive guide for procurement, ensuring standardized and approved components are utilized in government applications, prohibiting the use of substitute items without prior approval.

The document is a Source Control Drawing for a 3/8" drive, 3/8", 12-point socket, likely for federal government procurement or use. It outlines the technical specifications for the socket, including its length (1.26 inch max), drive size (3/8 inch), socket size (3/8 inch), finish (full polish chrome), and special features (standard length, double hexagon/12-point). The drawing references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020, and specifies ASME B107.110, Category 1, Type I for the socket itself. The document also lists approved sources of supply for the item, including Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers, CAGE codes, and vendor descriptions. Important notes emphasize that only described items are approved for use and that source identification does not guarantee continued availability. The document has undergone several revisions, reflecting updates and changes. This drawing serves as a critical reference for ensuring the correct specifications and approved vendors are utilized for this specific tool within government applications.

This government file is a source control drawing for a 3/8" drive, 7/16", 12-point socket, identified as part number 0703C0004. It details the specifications, approved sources of supply, and applicable standards for this specific tool. Key specifications include a maximum length of 1.26 inches, a 3/8-inch drive size, a 7/16-inch socket size, and a full polish chrome finish, with a standard length and double hexagon (12-point) special feature. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110, Category 1, Type I. The document lists approved manufacturers such as Snap-On Industrial and Stanley Black & Decker, Inc. dba MAC Tools, along with their respective part numbers. The drawing also includes revision history and states that only items described are approved for use, and substitutes require prior approval. This document is crucial for procurement and quality assurance in federal government applications, ensuring that only approved and compliant parts are utilized.

This government file is a source control drawing for a 3/8" drive, 1/2", 12-point socket, identified as part number 0703C0005. It details the specifications, approved sources, and application of the socket, which is used on "MULTIPLE" assemblies and by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. Key specifications include a maximum length of 1.26 inches, a 3/8 inch drive size, and a full polish chrome finish, with special features noting it as a standard length, double hexagon (12-point) socket. The document lists applicable standards such as ASME B107.110, Y14.100-2017, and Y14.5-2020. Approved sources include SNAP-ON INDUSTRIAL and STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, along with their respective part numbers and vendor descriptions. The drawing also contains revision history and general notes regarding applicable standards, the approval of described items only, and the non-guarantee of continued availability from approved sources. This document is crucial for ensuring the correct procurement and use of this specific tool within government applications, emphasizing adherence to strict standards and approved suppliers.

The document is a Source Control Drawing (DWG NO. 0703C0006) for a 3/8" drive, 9/16", 12-point socket, likely for federal government procurement or inventory. It details the product's specifications, including a maximum length of 1.26 inches, a 3/8-inch drive size, and a 9/16-inch socket size, with a full polish chrome finish and a standard length, double hexagon (12-point) special feature. The drawing references applicable standards such as ASME B107.110, Category 1, Type I, and lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-on Industrial, with their respective part numbers and vendor descriptions. The document also includes revision history, design, and drawing approvals, and notes regarding applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), the approval process for substitute items, and the non-guarantee of continued availability from listed sources. The US Army Combat Capabilities Development Command Armaments Center is identified as the design activity.

This government file is a Source Control Drawing for a 3/8" drive, 5/8", 12-point socket, likely for federal procurement or an RFP. It details the product's specifications, including a maximum length of 1.26 inches, a 3/8-inch drive size, and a 5/8-inch socket size, with a full polish chrome finish and a standard length, double hexagon (12-point) feature. The document lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110, Category 1, Type I. Approved sources of supply are identified, including SNAP-ON INDUSTRIAL and STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, along with their respective part numbers and descriptions. The drawing also includes revision history and approvals from various engineering and quality personnel from the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. It emphasizes that only items described are approved for use and that substitutes require prior approval.

This government file is a source control drawing for a 3/8" drive, 11/16", 12-point socket, identified as part number 0703C0009. The document details specifications such as a maximum length of 1.26 inches, a 3/8-inch drive size, and a full polish chrome finish, with special features including a standard length and double hexagon (12-point) design. It references applicable standards like ASME B107.110, Category 1, Type I. The drawing also lists approved sources of supply, including Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers and descriptions. The document includes revision history, with the latest revision in 2024. The drawing was generated from a solid model and is maintained by the US Army Combat Capabilities Development Command Armaments Center.

This government file is a source control drawing (DWG NO. 0703C1004) for a 3/8" drive, 10 MM, 12-point socket, managed by the US Army Combat Capabilities Development Command Armaments Center. The document specifies detailed technical requirements for the socket, including its dimensions (32 MM max length, 3/8" drive size, 10 MM socket size), finish (full polish chrome), and special features (standard length, double hexagon). It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110. The drawing lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools) and Snap-on Industrial, along with their respective part numbers and CAGE codes. The document also includes revision history, indicating updates and changes over time, and notes regarding the use of approved items and the non-guarantee of continued availability from listed sources. This file is crucial for procurement and quality control within federal government applications, ensuring that only approved and compliant tools are utilized.

This document is a Source Control Drawing (0703C1005) for a 3/8" drive, 11 MM, 12-point socket, likely for federal procurement or military applications given its origin with the US Army Combat Capabilities Development Command Armaments Center. It details the product's specifications, including a maximum length of 32 MM (1.26 inches), a 3/8-inch drive size, an 11 MM socket size, and a full polish chrome finish. The document also lists approved sources of supply, such as Stanley Black & Decker, Inc. (DBA Mac Tools) and Williams J H Industrial Products Inc., along with their respective part numbers and vendor descriptions. Applicable standards and specifications include ASME Y14.100-2017 and ASME Y14.5-2020, with the socket itself conforming to ASME B107.110, Category 1, Type I. The drawing emphasizes that only described items are approved for use and that substitute items require prior approval, highlighting strict adherence to specifications for government projects. Revisions to the drawing are also noted, indicating a controlled design process.

This government file is a source control drawing for a 3/8" drive, 12 MM, 12-point socket, likely for federal procurement or an RFP. It details the item's specifications, including a maximum length of 32 MM (1.26 inches), a 3/8-inch drive size, and a 12 MM socket size with a full polish chrome finish. Special features include its standard length and double hexagon (12-point) design. The drawing references applicable standards such as ASME B107.110, Category 1, Type I. The document also lists approved sources of supply, including Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial, along with their respective CAGE codes, part numbers, and vendor descriptions. Previous revisions and design approvals are noted, indicating a structured development and approval process. The drawing is maintained by CAD and emphasizes that changes must be incorporated by the design activity, highlighting strict control over the item's specifications and approved suppliers.

This government file is a source control drawing for a 3/8" drive, 13 MM, 12-point socket, likely for federal procurement or use within a government application. It specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only described items are approved for use, prohibiting substitutes without prior approval. The document lists approved sources, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and descriptions. Key specifications for the socket are detailed, such as a maximum length of 32 MM (1.26 inch), a 3/8-inch drive size, a 13 MM socket size, a full polish chrome finish, and a standard length, double hexagon (12-point) special feature. It also references ASME B107.110, CATEGORY 1, TYPE I as an applicable standard/specification. The document was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity, the US Army Combat Capabilities Development Command Armaments Center.

This government file details a source control drawing for a 3/8 inch drive, 14 MM, 12-point socket (part number 0703C1008). It specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, and notes that only approved items are to be used. The drawing lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and descriptions. Key specifications for the socket include a maximum length of 32 MM (1.26 inch), a 3/8 inch drive size, 14 MM socket size, and a full polish chrome finish. Special features include a standard length and a double hexagon (12-point) design, adhering to ASME B107.110, Category 1, Type I. The document also includes revision history and drawing approvals from various engineers and quality personnel from the US Army Combat Capabilities Development Command Armaments Center.

The document details a Source Control Drawing for a 3/8" Drive, 15 MM, 12-PT Socket, identified by drawing number 0703C1009. It specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The drawing outlines critical notes regarding approved items, the prohibition of substitute items without prior approval, and clarifies that the identification of approved sources does not guarantee continued availability. Key specifications for the socket include a maximum length of 32 MM (1.26 inch), a 3/8 inch drive size, a 15 MM socket size, a full polish chrome finish, and a standard length, double hexagon (12-point) special feature. Approved sources of supply are listed, including Stanley Black & Decker, Inc. DBA MAC Tools, Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers, CAGE codes, and vendor descriptions. The document is approved for public release and is maintained by the US Army Combat Capabilities Development Command Armaments Center.

This government file is a Source Control Drawing for a 3/8" Drive, 16 MM, 12-PT Socket. It details the specifications, design approvals, and approved sources for this specific tool. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only described items are approved for use. Key specifications include a maximum length of 32 MM (1.26 inch), a 3/8 inch drive size, 16 MM socket size, full polish chrome finish, and a double hexagon (12-point) special feature, adhering to ASME B107.110, Category 1, Type I. The drawing lists several approved sources, including Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial, with corresponding vendor part numbers and descriptions. This document serves as a critical reference for procurement and quality control within federal government applications, ensuring standardization and reliability of the specified socket.

This government file is a Source Control Drawing (DWG NO. 0703C1011) for a 3/8" drive, 17 MM, 12-point socket, intended for use by the US Army Combat Capabilities Development Command Armaments Center. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and specifies that only items described are approved, with no substitutes allowed without prior approval. It details the socket's specifications, including a maximum length of 32 MM (1.26 inches), a 3/8 inch drive size, 17 MM socket size, full polish chrome finish, and a standard length, double hexagon (12-point) special feature, adhering to ASME B107.110, Category 1, Type I. The drawing also lists approved sources of supply, including Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial, along with their respective part numbers and descriptions. Revisions to the product baseline are noted, and the document is designated for public release with unlimited distribution. This comprehensive drawing ensures the proper procurement and use of the specified socket within military applications.

This government file is a source control drawing for a 3/8" drive, 18 MM, 12-point socket, likely for federal procurement or an RFP. It details the product's specifications, including length (32 MM max), drive size (3/8 inch), socket size (18 MM), finish (full polish chrome), and special features (standard length, double hexagon/12-point). The drawing lists applicable standards/specifications such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. It also provides a list of approved sources, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial, along with their part numbers, CAGE codes, and addresses. The document emphasizes that only described items are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability.

This government file is a Source Control Drawing for a 3/8" drive, 19mm, 12-point socket, likely for federal procurement or an RFP. It details the mechanical and material specifications for the socket, including its length (32 mm max), drive size (3/8 inch), socket size (19 mm), and finish (full polish chrome). The drawing specifies applicable standards such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. It also lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial, providing their CAGE codes, part numbers, and addresses. The document emphasizes that only items described are approved for use and that substitutes require prior approval. This ensures quality control and adherence to precise military specifications for critical equipment.

This government file is a Source Control Drawing (DWG NO. 0703C1014) for a 3/8" Drive, 20 MM, 12-Point Socket, issued by the US Army Combat Capabilities Development Command Armaments Center. The document specifies detailed technical requirements, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), and approved sources of supply. It lists several vendors, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers and descriptions. The drawing also includes key specifications such as a maximum length of 32 MM (1.26 inch), a 3/8 inch drive size, and a full polish chrome finish, emphasizing its standard length and double hexagon (12-point) special features. The document explicitly states that only items described are approved for use, and substitutes require prior approval. This drawing is critical for ensuring material standardization and quality control within government applications.

This government file, likely an exhibit within an RFP or grant application, details the specifications for a 3/8" drive, 21 MM, 12-point socket. It functions as a source control drawing, identifying approved suppliers and their corresponding part numbers for this specific tool. Key specifications include a maximum length of 32 MM (1.26 inches), a 3/8-inch drive size, a 21 MM socket size, and a full polish chrome finish with a standard length and double hexagon (12-point) special feature. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110 Category 1, Type I. The document explicitly states that only items described are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing was generated from a solid model and is CAD maintained by the US Army Combat Capabilities Development Command Armaments Center.

This government document is a source control drawing for a 3/8" drive, 22mm, 12-point socket, likely for federal procurement or an RFP. It details the socket's specifications, including a maximum length of 32mm (1.26 inches), a 3/8-inch drive size, a 22mm socket size, and a full polish chrome finish with a standard length, double hexagon (12-point) special feature. The document references applicable standards/specifications like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110, Category 1, Type I for the socket itself. It lists multiple approved sources of supply, including Stanley Black & Decker, Inc. DBA Mac Tools, Snap-On Industrial, and Stanley Proto Industrial, providing their CAGE codes, part numbers, and vendor descriptions. The drawing emphasizes that only described items are approved for use and substitutes require prior approval. It also clarifies that listed sources are not guaranteed for present or continued availability.

This government file is a Source Control Drawing for a 1/2" drive, 3/4", 6-point socket, primarily used by the US Army Combat Capabilities Development Command Armaments Center. The drawing details the specifications of the socket, including its length, drive size, socket size, finish, and special features. It also lists applicable specifications/standards, such as ASME B107.110. The document identifies several approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-on Industrial, and Stanley Proto Industrial, providing their CAGE codes, part numbers, and vendor descriptions. The drawing includes revision history, detailing product baselines and engineering change requests. The distribution statement indicates unlimited public release. This document serves as a critical reference for procurement and engineering, ensuring the correct and approved components are used in relevant applications for federal government projects.

This government file is a source control drawing for a 1/2" drive, 13/16", 6-point socket, identified by Drawing No. 0705A0012. It specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved for use. The document details the socket's specifications, including a maximum length of 1.635 inches, a 1/2-inch drive size, a 13/16-inch socket size, and a full polish chrome finish, adhering to ASME B107.110, Category 1, Type I. It lists approved sources, including Stanley Black & Decker, Inc. DBA Mac Tools and Snap-on Industrial, with their respective part numbers and descriptions. The drawing was generated from a solid model and is maintained by the design activity, the US Army Combat Capabilities Development Command Armaments Center.

This government file is a source control drawing for a 1/2" drive, 7/8", 6-point socket, intended for use by the US Army Combat Capabilities Development Command Armaments Center. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and provides detailed specifications, including a maximum length of 1.760 inches, 1/2 inch drive size, 7/8 inch socket size, and a full polish chrome finish with a standard length, single hexagon (6-point) feature. It also lists approved sources of supply, such as Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and descriptions. The drawing emphasizes that only items described are approved for use, and substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The document includes revision history, detailing changes and approvals, reflecting a structured approach to managing military hardware specifications.

This government file, a Source Control Drawing (DWG NO. 0705A0014), details specifications for a 1/2" drive, 15/16", 6-point socket. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and provides a list of approved manufacturers and their corresponding part numbers, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial. The drawing specifies key characteristics such as a maximum length of 1.760 inches, a full polish chrome finish, and a standard length, single hexagon design, adhering to ASME B107.110, Category 1, Type I. It emphasizes that only items described are approved for use and that substitute items require prior approval. The document also includes revision history, design approvals, and distribution statements, indicating its approval for public release. This file ensures that procurements for this specific socket meet stringent government and industry standards.

This government file is a source control drawing for a 1/2" drive, 1", 6-point socket, likely for federal procurement or supply chain management. It details applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), specifications for the socket (e.g., length, drive size, finish), and lists approved sources of supply. The document explicitly states that only items described are approved, and substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing includes revision history, design, and quality approvals from various engineers and the US Army Combat Capabilities Development Command Armaments Center. This document ensures standardization and quality control for this specific tool within government applications.

This document is a Source Control Drawing for a 1/2" drive, 12 MM, 6-point socket, outlining its design, specifications, and approved sources. It details the socket's dimensions, finish (full polish chrome), and special features (standard length, single hexagon). Applicable standards include ASME Y14.100-2017 and ASME Y14.5-2020, with specific performance requirements from ASME B107.110, Category 1, Type I. The drawing identifies approved vendors such as Snap-On Industrial and Stanley Proto Industrial, providing their part numbers, CAGE codes, and descriptions. It emphasizes that only items described are approved, and substitutions require prior approval. The document was generated from a solid model, indicating CAD maintenance by the design activity, the US Army Combat Capabilities Development Command Armaments Center.

This government file details the specifications for a 1/2-inch drive, 13 mm, 6-point socket, identified as Drawing Number 0705A1005. The document serves as a Source Control Drawing, outlining the design, materials, and approved sources for this specific tool. Key specifications include a maximum length of 39 mm, a 1/2-inch drive size, a 13 mm socket size, and a full polish chrome finish, with a standard length and single hexagon (6-point) feature. It references ASME standards Y14.100-2017 and Y14.5-2020, as well as ASME B107.110. Approved sources of supply are listed, including Snap-On Industrial, Stanley Proto Industrial, and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers and CAGE codes. The document emphasizes that only items described are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This comprehensive drawing ensures strict adherence to quality and design standards for the specified socket, crucial for federal procurement and supply chain management.

This government file is a source control drawing for a 1/2" drive, 14 MM, 6-point socket, identified by part number 0705A1006. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), specifications, and approved sources of supply. Key specifications include a maximum length of 39 MM (1.5354 inches), a 1/2 inch drive size, a 14 MM socket size, and a full polish chrome finish with standard length and a single hexagon (6-point) design. The drawing explicitly states that only items described are approved for use and that substitutes require prior approval. Approved sources listed include SNAP-ON INDUSTRIAL, STANLEY PROTO INDUSTRIAL, and STANLEY BLACK & DECKER, INC. DBA MAC TOOLS. The document also includes revision history, with updates made in 2015 and 2022, indicating ongoing management and updates to the part's specifications and approved vendors. This drawing is crucial for ensuring that procured sockets meet the exact requirements for US Army applications, falling under the purview of federal government procurement and supply chain management.

This document is a source control drawing for a 1/2" drive, 15 MM, 6-point socket, intended for use by the US Army Combat Capabilities Development Command Armaments Center. It outlines the design, specifications, and approved sources of supply for this specific tool. Key specifications include a maximum length of 40 MM (1.5748 inches), a 1/2-inch drive size, a 15 MM socket size, and a full polish chrome finish with standard length and a single hexagon (6-point) feature. The document references applicable standards such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110, Category 1, Type I. Approved sources include Snap-On Industrial, Stanley Proto Industrial, and Stanley Black & Decker, Inc. dba MAC Tools, each with specific part numbers and vendor descriptions. The drawing emphasizes that only items described are approved for use, and substitutes require prior approval. It also clarifies that listed sources do not guarantee continued availability. This document serves as a critical reference for procurement and quality assurance within government contracting for this specific tool.

This government file is a source control drawing (DWG NO. 0705A1008) for a 1/2" drive, 16 MM, 6-point socket, likely for federal procurement or supply. It details the socket's specifications, including a maximum length of 40 MM (1.5748 inches), a 1/2 inch drive size, and a full polish chrome finish. The drawing specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110, Category 1, Type I for the socket itself. It lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools), Snap-on Industrial, and Stanley Proto Industrial, along with their part numbers, vendor data, and CAGE codes. The document emphasizes that only items described are approved for use and that substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing was created by the US Army Combat Capabilities Development Command Armaments Center and is maintained as a CAD model.

This document is a source control drawing for a 1/2" drive, 17mm, 6-point socket, primarily for use by the US Army Combat Capabilities Development Command Armaments Center. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), specifications for the socket (40mm max length, 1/2" drive, 17mm size, full polish chrome finish, standard length, single hexagon), and approved sources of supply. The drawing specifies that only items described are approved, and substitutions require prior approval. Approved vendors include Snap-on Industrial, Stanley Proto Industrial, and Stanley Black & Decker, Inc. DBA Mac Tools, each with specific part numbers and descriptions. The document also includes revision history and drawing approvals, emphasizing its role in controlling the procurement and use of this specific tool within government applications.

This government file is a source control drawing for a 1/2" drive, 18 mm, 6-point socket, identified by Drawing No. 0705A1010. It outlines specific design, material, and application standards for the socket, including applicable ASME specifications (Y14.100-2017 and Y14.5-2020) and ASME B107.110. The document details the socket's specifications: 40 mm (1.5748 inch) maximum length, 1/2 inch drive size, 18 mm socket size, full polish chrome finish, and a standard length, single hexagon (6-point) special feature. It also lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools), Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers, CAGE codes, and vendor descriptions. The drawing emphasizes that only items described are approved, and substitutes require prior approval. This document is crucial for procurement and quality assurance in federal applications, ensuring standardization and control over approved components.

This government file details a source control drawing for a 1/2" drive, 19 MM, 6-point socket, identified as part number 0705A1011. The document specifies design approvals, revisions, and technical specifications, including a maximum length of 40 MM (1.5748 inches) and a full polish chrome finish. It lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.110, Category 1, Type I. The drawing also identifies approved sources of supply, including SNAP-ON INDUSTRIAL, STANLEY PROTO INDUSTRIAL, and STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, along with their respective part numbers and CAGE codes. This document is approved for public release and distribution is unlimited, serving as a critical reference for procurement and usage in government applications.

This government file is a Source Control Drawing for a 1/2" drive, 21 MM, 6-point socket. It details the mechanical and material specifications, including length (42 MM max), drive size (1/2 inch), socket size (21 MM), and a full polish chrome finish. The drawing specifies applicable standards such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. It lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-on Industrial, and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. The document emphasizes that only described items are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing includes revision history, design, and quality approvals, indicating a detailed and controlled engineering document for a specific tool used by the US Army Combat Capabilities Development Command Armaments Center.

This government document is a source control drawing for a 1/2-inch drive, 22 mm, 6-point socket. It specifies the mechanical properties, dimensions, finish, and special features of the socket, including a maximum length of 45 mm (1.7717 inches) and a full polish chrome finish. The drawing also lists applicable standards and specifications, such as ASME Y14.100-2017 and ASME Y14.5-2020. Approved sources of supply are provided, including Snap-On Industrial and Stanley Proto Industrial, along with their respective part numbers, CAGE codes, and vendor descriptions. The document emphasizes that only items described are approved for use, and substitutes require prior approval. This drawing is approved for public release with unlimited distribution, indicating its role in federal procurement or supply chain management for military equipment.

The document is a government source control drawing for a 1/2" drive, 24 MM, 6-point socket, identified by part number 0705A1016. It details the specifications, revisions, and approved sources of supply for this specific tool. Key specifications include a maximum length of 45 MM (1.7717 inches), a 1/2-inch drive size, a 24 MM socket size, and a full polish chrome finish, with standard length and single hexagon features. The applicable standard is ASME B107.110, Category 1, Type I. The drawing lists approved suppliers such as SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their part numbers, CAGE codes, and addresses. The document also includes notes regarding applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), the requirement for prior approval for substitute items, and a disclaimer about the guaranteed availability of listed sources. This drawing is crucial for ensuring the procurement of the correct and approved tool for federal applications, emphasizing quality control and standardization within government contracts.

This government file details the specifications for a "RATCHET, 1/4", REVERSIBLE" tool, identified by drawing number 0711A0000. It is a source control drawing indicating that only items described are approved for use, and substitutes require prior approval. The document lists applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. Key specifications include a nominal length of 5.25 inches, a 1/4-inch drive size, a full polish chrome handle, a ratcheting arc of no more than 8 degrees, and special features like a sealed head and a reversible mechanism. Approved sources of supply are also provided, including Snap-on Industrial and Stanley Proto Industrial, along with their respective part numbers and descriptions. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This document is crucial for ensuring the correct procurement and use of this specific ratchet tool within government applications, emphasizing compliance and approved sourcing.

This document is a Source Control Drawing (SCD) for a 3/8-inch, reversible ratchet, identified as part number 0711A1000, for use by the US Army Combat Capabilities Development Command Armaments Center. The drawing specifies the ratchet's design, application, and approved sources of supply. Key specifications include a nominal length of 8 inches, a 3/8-inch drive size, a full polish chrome handle, a ratcheting arc of no more than 8 degrees, and special features such as a sealed head and a reversing lever or switch. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. Approved sources of supply are Snap-On Industrial and Stanley Proto Industrial, with specific vendor part numbers. The document also details drawing approvals, revisions, and distribution statements, indicating it is approved for public release. This SCD ensures that only approved items are used and outlines the technical requirements for the ratchet.

This government file details a source control drawing for a 1/2 inch reversible ratchet, contract number DAI, identified as part number 0711A2000. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), specifies that only items described are approved for use, and clarifies that identification of approved sources does not guarantee continued availability. Key specifications for the ratchet include a 10-inch nominal length, 1/2-inch drive size, full polish chrome handle finish, and a ratcheting arc of no more than 8 degrees. Special features include a sealed head, reversibility, and a reversing lever or switch. Applicable standards for the tool are ASME B107.110, Category 10, Type I, Class 2. Approved sources of supply are Snap-On Industrial and Stanley Proto Industrial, with their respective part numbers and descriptions. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

The document is a source control drawing for a 1/4 inch drive, 2-inch extension. It details the specifications, approved sources, and design approvals for this specific tool. The drawing outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and provides a list of approved manufacturers such as Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial. It emphasizes that only items described are approved, and substitutes require prior approval. The document also includes revision history and engineering approvals from the US Army Combat Capabilities Development Command Armaments Center. This drawing ensures standardization and quality control for the procurement and use of this extension in government applications.

This government file is a Source Control Drawing for a 1/4 inch drive, 6-inch extension, likely part of an RFP for federal procurement. It details specific requirements for the extension, including a 6-inch nominal length, 1/4 inch drive size, full polish chrome finish, and a knurled grip, adhering to ASME B107.110 standards. The document identifies approved sources of supply, such as Snap-On Industrial and Stanley Proto Industrial, providing their CAGE codes and part numbers. It also includes revision history and relevant approval dates. The drawing emphasizes that only described items are approved for use, and substitutes require prior approval. This document serves to standardize components for government applications, ensuring quality and compatibility.

This government file is a Source Control Drawing for a 3/8" drive, 3" extension, part number 0711B1000, intended for use by the US Army Combat Capabilities Development Command Armaments Center. The document specifies design approvals, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and notes regarding item approval and source availability. Key specifications include a nominal length of 3 inches, a 3/8 inch drive size, a full polish chrome finish, and a knurled grip, adhering to ASME B107.110, Category 10, Type II, Class 2, Style A. The drawing also lists approved sources of supply, including Snap-On Industrial, Stanley Proto Industrial, and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers and descriptions. Revisions to the drawing are documented, with the latest update on 2024-12-17. This document ensures the proper procurement and use of this specific tool component within federal government applications.

This government file, identified as Source Control Drawing 0711B1001, details the specifications and approved sources for a 3/8" drive, 6" extension. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only items described are approved, prohibiting substitutes without prior approval. It specifies the drive extension's length (6 inches nominal), drive size (3/8 inch), finish (full polish chrome), and special features (knurled grip). The drawing also references ASME B107.110 and lists approved sources, including Snap-On Industrial, Stanley Proto Industrial, and Stanley Black & Decker, Inc. dba Mac Tools. Revisions to the product baseline are documented, with the latest dated December 17, 2024. This technical drawing is crucial for procurement and quality control within federal government applications, likely for military or defense-related equipment, ensuring part compatibility and quality through approved suppliers.

This government file is a source control drawing for a 1/2-inch drive, 2-inch extension, specifically part number 0711B2000. It details the product specifications, including its length (2 inches nominal), drive size (1/2 inch), and finish (full polish chrome). The document references applicable standards such as ASME B107.110, Category 10, Type II, Class 2, Style A, as well as ASME Y14.100-2017 and ASME Y14.5-2020. It lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and CAGE codes. The drawing also includes important notes regarding applicable standards, the approval process for substitute items, and the non-guarantee of continued availability from listed sources. This document serves to control the design and approved suppliers for this specific tool component within a government context.

This government file is a source control drawing (DWG NO. 0711B2001) for a 1/2" drive, 5" extension. It specifies the design, materials, and approved sources for this tool, which is intended for use by the US Army Combat Capabilities Development Command Armaments Center. The document details applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), product specifications (5 inches nominal length, 1/2 inch drive size, full polish chrome finish, knurled grip), and lists approved vendors such as Snap-On Industrial and Stanley Black & Decker, Inc. It emphasizes that only items described are approved for use and substitutes require prior approval. The drawing is CAD maintained, with changes to be incorporated by the design activity. This document ensures standardization and quality control for this specific military tool.

This government file is a Source Control Drawing for a 1/2" Drive Extension, 10" long, identified by Drawing No. 0711B2002. It details the specifications, applicable standards, and approved sources for this tool. Key specifications include a 10-inch nominal length, 1/2-inch drive size, full polish chrome finish, and a knurled grip, adhering to ASME B107.110. The document lists approved vendors such as Snap-On Industrial and Stanley Proto Industrial, providing their part numbers and CAGE codes. It also notes revisions to the drawing, including product baseline and error corrections. The drawing is approved for public release, indicating its availability for contractors and suppliers within the federal procurement context, ensuring standardisation and quality control for government-acquired tools.

This government file details a source control drawing for a hinged 3/8-inch socket wrench handle, identified by contract number 0711C1000 and CAGE Code 59678. The drawing specifies the handle's design, including a 9-inch nominal length, full polish chrome finish (with the exception of the drive), and a hinged feature. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.110. Approved sources of supply are Snap-On Industrial (CAGE 55719) and Stanley Proto Industrial (CAGE 1CV05). The document, maintained by the US Army Combat Capabilities Development Command Armaments Center, also includes revision history and distribution statements, emphasizing that only items described are approved for use and that substitute items require prior approval.

This government file is a source control drawing (DWG NO. 0711C2000) for a "HANDLE, SOCKET WRENCH, HINGED, 1/2"". It details the specifications, approved sources, and revisions for this tool. Key specifications include a length of 16 to 19 inches, a 1/2 inch drive size, a full polish chrome finish (excluding the drive), and a hinged handle. Applicable standards are ASME B107.110, Category 10, Type 1, Class 1, along with ASME Y14.100-2017 and ASME Y14.5-2020. Approved sources include Snap-On Industrial and Stanley Proto Industrial, with specific part numbers and vendor descriptions provided. The document also notes that only items described are approved for use and that substitute items require prior approval. This drawing, maintained by the US Army Combat Capabilities Development Command Armaments Center, serves as a critical reference for procurement and quality control of this specific socket wrench handle.

This government file, Drawing Number 0711D0000, is a Source Control Drawing for a "Speeder, Spin Type, 1/4" Drive" socket wrench handle. It details the product's specifications, including a nominal length of 6 inches, a 1/4 inch drive size, a full polish chrome finish, and a plastic screwdriver grip handle. Key features include its spin-type design and a 1/4" female drive in the handle. The drawing references applicable standards such as ASME B107.110 and lists approved sources of supply, including Snap-On Industrial and Stanley Black & Decker, Inc. The document also outlines drawing approval details, revision history, and distribution statements, indicating it is approved for public release. It emphasizes that only items described are approved for use and that substitutes require prior approval.

This government file is a Source Control Drawing for a 1/4" Drive Brace Type Speeder. It outlines the specifications, approved sources, and design details for this tool. Key specifications include a length of 14.5-16 inches, a 1/4 inch drive size, a full polish chrome finish, and a single revolving handgrip. The document lists approved manufacturers like Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), along with their part numbers and addresses. It also references applicable standards and specifications such as ASME Y14.100-2017 and ASME Y14.5-2020. The drawing emphasizes that only described items are approved for use and that substitute items require prior approval. This document is crucial for procurement and quality assurance within federal government applications, ensuring that only approved and compliant tools are utilized.

This government file is a Source Control Drawing for a Socket Wrench Adapter (part number 0711F0000). The drawing, maintained by the US Army Combat Capabilities Development Command Armaments Center, specifies the design, approved sources, and technical requirements for the adapter. Key specifications include a length of 0.625 to 1.000 inches, a drive size of 1/4" female to 3/8" male, and a full polish chrome finish, adhering to ASME B107.110 standards. The document lists approved manufacturers like Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools). It also includes revision history and notes regarding applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), emphasizing that only described items are approved for use and that substitute items require prior approval. This drawing is crucial for ensuring the standardization and quality of socket wrench adapters used in military applications.

This document, a Source Control Drawing (DWG NO. 0711F2000), details the specifications and approved sources for an "ADAPTER, SOCKET, 1/2" F TO 3/8" M." Issued by the US Army Combat Capabilities Development Command Armaments Center, it outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and specific requirements for the socket wrench adapter, including a drive size of 1/2" F to 3/8" M and a length of 1.250 to 1.875 inches. The drawing lists multiple approved vendors, such as Snap-On Industrial and Stanley Proto Industrial, along with their part numbers and descriptions. It emphasizes that only described items are approved and substitutes require prior approval. The document also includes revision history and distribution statements, indicating its public release approval. This drawing serves as a critical reference for procurement and engineering within federal government applications, likely for RFPs or other acquisition processes.

This government file, likely an exhibit within an RFP or contract, details the specifications and approved sources for various "Universal Joint, 1/4" Drive" components. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), specific product details such as maximum length (1.5 inches), drive size (1/4 inch), and full polish chrome finish. It explicitly states that only items described are approved for use and that substitutions require prior approval. The file also provides a list of approved manufacturers and their respective part numbers and CAGE codes, including Stanley Black & Decker, Inc. (DBA MAC Tools), Snap-On Industrial, and Stanley Proto Industrial. The document emphasizes that the identification of sources does not guarantee continued availability. This Source Control Drawing is maintained by the US Army Combat Capabilities Development Command Armaments Center and includes revision history, underscoring its role in ensuring product quality and standardization within federal procurement.

This government file is a Source Control Drawing for a 3/8" drive universal joint, identified as drawing number 0711G1000. It outlines the specifications, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.110), and approved sources of supply for this component. The document details the dimensions, finish (full polish chrome), and provides a list of approved vendors and their corresponding part numbers, including Snap-On Industrial and Stanley Proto Industrial. Revisions to the drawing are documented with dates and descriptions. The drawing also includes important notes regarding the use of approved items only, the non-guarantee of continued availability from listed sources, and its generation from a solid model. This document serves as a critical reference for procurement and engineering within the US Army Combat Capabilities Development Command Armaments Center.

The document details a Source Control Drawing for a 1/2" Drive Universal Joint (Drawing No. 0711G2000), a component approved for use by the US Army Combat Capabilities Development Command Armaments Center. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and specifications for the universal joint, including a maximum length of 2.88 inches, 1/2-inch drive size, and a full polish chrome finish, adhering to ASME B107.110. The drawing specifies that only described items are approved and prohibits substitutes without prior approval. It also lists approved sources of supply, including Snap-On Industrial and Stanley Proto Industrial, along with their part numbers and descriptions. Revisions to the drawing are noted, with the latest dated December 17, 2024. The document emphasizes that the identification of approved sources does not guarantee continued availability.

The document is a Source Control Drawing for a Phillips #1 Hex Bolster Screwdriver with a 3-inch blade. It details the specifications, design approvals, and approved sources for this specific tool. Key specifications include a steel blade with a full polish chrome finish, a treated tip to prevent chipping, and a two-material or texture single-piece-design handle with a hex bolster. The drawing lists the US Army Combat Capabilities Development Command Armaments Center as the design activity and includes revisions, approval dates, and associated ERR (Engineering Release Record) numbers. Approved sources of supply are detailed with part numbers, vendor data, names, addresses, and CAGE codes, including Stanley Black & Decker, Inc. DBA MAC Tools and Snap-On Industrial. The document emphasizes that only described items are approved for use and that substitute items require prior approval. Distribution is unlimited, and applicable standards/specifications include ASME Y14.100-2017 and ASME Y14.5-2020.

This government file details the specifications for a Phillips #2 screwdriver with a 4-inch blade and hex bolster, identified as a Source Control Drawing. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only described items are approved for use, prohibiting substitutes without prior approval. It lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial. The drawing also includes revision history and distribution statements, indicating approval for public release. The purpose of this document is to provide a comprehensive technical definition and approved procurement channels for this specific tool within government applications.

This document is a Source Control Drawing (SCD) for a Phillips #3, hex bolster, 6-inch blade screwdriver, detailing specifications and approved sources. It is a federal government file, likely for procurement or inventory. The drawing specifies the screwdriver's type, blade length, tip size, material (steel blade, two-material or texture single-piece-design handle), finish (full polish chrome blade, treated tip), and special features (hex bolster). The primary approved source is STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, with SNAP-ON INDUSTRIAL also listed. The document also outlines applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020 and includes notes on item approval, substitute items, and source availability. This drawing serves as a critical reference for ensuring the correct specifications and approved vendors are used for this tool within government applications.

This government file is a source control drawing for a stubby flat tip screwdriver, part number 0712B0000. It details the product specifications, approved sources of supply, and relevant standards. Key specifications include a blade length of 1.25 to 1.75 inches, a 1/4 inch tip size, a steel blade with a full polish chrome finish, and a plastic handle. The tip is treated to prevent chipping. The drawing lists approved vendors such as Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and CAGE codes. Applicable standards are ASME Y14.100-2017 and ASME Y14.5-2020. The document emphasizes that only described items are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. This document is crucial for procurement and quality control within government applications requiring this specific tool.

This government file is a source control drawing for a 1/4-inch flat tip screwdriver with a 4-inch blade and hex bolster, used by the US Army Combat Capabilities Development Command Armaments Center. The drawing specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved for use, with no substitutes allowed without prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The document lists two approved sources: Snap-on Industrial and Stanley Black & Decker, Inc. dba MAC Tools, along with their part numbers, CAGE codes, and addresses. Key specifications include a steel blade with a full polish chrome finish and a treated tip to prevent chipping, and a two-material or single-piece design handle. The drawing also details revision history and general dimensions in inches. This type of document is crucial for federal government RFPs related to military equipment and tools, ensuring that procured items meet strict design and material specifications.

This document is a source control drawing for a flat tip screwdriver with specific dimensions and features, including a 3/8" tip, 8" blade, and hex bolster. It lists applicable standards, specifications, and approved sources of supply, such as Stanley Black & Decker, Inc. DBA Mac Tools and Snap-On Industrial. The drawing details revisions, including updates to part numbers and descriptions, and specifies material for the blade (steel) and handle (two-material or single-piece design) along with finish requirements. The document emphasizes that only described items are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. The overall purpose is to provide a controlled technical document for the procurement and use of this specific screwdriver in government applications.

This document is a Source Control Drawing for a 5/16" flat tip screwdriver with a 6" blade and hex bolster, identified as Part No. 0712B0011. It outlines the specifications for the screwdriver, including blade length, tip size, material (steel blade, two-material or single-piece handle), and finish (full polish chrome blade, treated tip). The drawing also lists approved sources of supply, specifically Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), along with their part numbers and vendor descriptions. Applicable standards/specifications cited are ASME Y14.100-2017 and ASME Y14.5-2020. The document emphasizes that only items described are approved for use, and substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. This detailed engineering drawing ensures strict control over the procurement and use of this specific tool within US Army applications.

This government file is a source control drawing for a flat tip screwdriver, cabinet type, with a 1/8-inch tip and a 6-inch blade. The document details the specifications of the screwdriver, including blade material (steel), handle material (plastic), finish (full polish chrome blade, treated tip), and special features (round shank). It also lists applicable standards, such as ASME Y14.100-2017 and ASME Y14.5-2020. The drawing specifies that only described items are approved for use and that substitute items require prior approval. It identifies the US Army Combat Capabilities Development Command Armaments Center as the design activity. An approved source of supply, Klein Tools, is listed with their part number and description. The document emphasizes that the identification of a source does not guarantee continued availability. The drawing is CAD maintained, and changes are to be incorporated by the design activity.

This document is a Source Control Drawing for a "SCREWDRIVER, FLAT TIP, CABINET, 3/16", 5" BLADE" used by the US Army Combat Capabilities Development Command Armaments Center. It outlines the specifications for the screwdriver, including its flat tip cabinet type, 5-inch nominal blade length, .1875 (3/16) inch tip size, steel blade material, and a two-material or single-piece-design handle. The finish requires a full polish chrome blade and a treated tip to prevent chipping, with a round shank and cabinet type as special features. The drawing lists applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. It also provides a list of approved sources, including Klein Tools and Snap-on Industrial, with their respective CAGE codes, part numbers, and descriptions. The document emphasizes that only items described are approved for use and that substitute items require prior approval. It also states that the identification of approved sources does not guarantee continued availability. The document includes revision history and drawing approvals by various engineers.

This government file is a Source Control Drawing for a Jewelers Screwdriver, Flat Tip, .025", Plastic Handle, identified by drawing number 0712C0000. It details the specifications, approved sources, and revisions for the screwdriver. Key specifications include an overall length of 4.9 inches nominal, a .025 inch tip size, a steel blade, a plastic handle, and special features such as a fixed handle and ESD-safe properties. The document lists Moody Tools Inc. as an approved source with their part number 51-2022. It also includes revision history, with updates in 2018 and 2024, and emphasizes adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards. The drawing is approved for public release, and notes indicate that only items described are approved for use, and substitute items require prior approval.

This government file is a Source Control Drawing for a Jeweler's Screwdriver, Flat Tip, .040", Plastic Handle, identified by drawing number 0712C0001. The document specifies the design, materials, and approved sources for this specialized tool. Key specifications include an overall length of 4.9 inches nominal, a .040-inch tip size, a steel blade, a plastic handle, and special features such as a fixed handle and electro-static discharge (ESD) safe properties. The drawing details applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use. It also lists approved sources, including Moody Tools Inc., with their part numbers and descriptions. The document is approved for public release, indicating its use in federal procurement or supply chain management for military or government applications.

This document is a source control drawing for a jeweler's screwdriver, flat tip, .055", with a plastic handle, identified as part number 0712C0002. It specifies the item's design, materials (steel blade, plastic handle), and special features, including a fixed handle and ESD-safe properties. Key specifications include an overall length of 4.9 inches nominal and a .055 inch tip size. The document lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It also identifies Moody Tools Inc. as an approved source of supply with their part number 51-2024 and CAGE code 89750. The drawing includes revision history, approval dates, and notes on the use of approved items and the non-guarantee of continued availability from sources. This document is a technical specification for procurement within a government context, likely for use by the US Army Combat Capabilities Development Command Armaments Center.

This government file is a Source Control Drawing for a Jewelers Screwdriver, Flat Tip, .070", Plastic Handle, identified by drawing number 0712C0003. The document details the specifications, design approvals, and approved sources for this specific tool. Key specifications include an overall length of 4.9 inches nominal, a .070-inch tip size, a steel blade, a plastic handle, and special features such as a fixed handle and electro-static discharge (ESD) safety. The drawing also lists two approved sources of supply: Moody Tools Inc. (CAGE Code 89750, Part No. 51-2025) and a second source that has been removed. The document emphasizes adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards and notes that only items described are approved for use, requiring prior approval for any substitutes. This drawing is approved for public release and distribution is unlimited.

This document is a Source Control Drawing for a jewelers screwdriver, flat tip, .080 inches, with a plastic handle. It details the specifications, approved sources, and relevant standards for this specific tool. The screwdriver has an overall length of 4.9 inches nominal, a .080-inch tip size, a steel blade, and a plastic handle. A key feature is its fixed, Electro-Static Discharge (ESD) safe handle. The drawing lists Moody Tools Inc. as an approved source, providing their CAGE code, part number, and description. The document also includes distribution statements, applicable ASME standards (Y14.100-2017 and Y14.5-2020), and notes regarding the use of approved items and the non-guarantee of continued supply. Revisions to the drawing are also tracked, indicating updates to the product baseline.

This government file is a Source Control Drawing (drawing number 0712C0005) for a Jewelers Screwdriver, Flat Tip, .100", Plastic Handle. The drawing specifies the physical characteristics, materials (steel blade, plastic handle), and special features (fixed handle, ESD safe) of the screwdriver. It also lists approved sources of supply, including Moody Tools Inc., with their part number 51-2027. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved for use, with no substitutes allowed without prior approval. Revisions to the drawing are also detailed, with the latest revision from 2024-12-17. The file is approved for public release and distribution is unlimited. This document is crucial for procurement and quality assurance in federal government contexts, ensuring that specific tools meet defined standards and specifications.

This government document is a Source Control Drawing for a "JEWELERS SCREWDRIVER, CROSS TIP #0, PLASTIC HANDLE." It details the specifications, approved sources, and relevant standards for this specific item. Key specifications include an overall length of 4.9 inches nominal, a #0 tip size, a steel blade, a plastic handle, and features such as a fixed handle and electro-static discharge (ESD) safety. The document lists Moody Tools Inc. as an approved source, providing their address, CAGE code, and vendor part number. It references ASME Y14.100-2017 and ASME Y14.5-2020 as applicable standards. The drawing also includes revision history, with updates in 2018 and 2024. This document is crucial for procurement and ensures that only approved and compliant items are used in specified applications, aligning with federal procurement standards.

This government drawing, 0712D0000, details the specifications for a "SCREWDRIVER, OFFSET, RATCHET, 1/4" SLOTTED, PHILLIPS #2" for the US Army Combat Capabilities Development Command Armaments Center. It is a Source Control Drawing, meaning only approved items described are for use. The document lists applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and outlines the screwdriver's specifications, including its offset ratcheting type, 1-inch nominal tip length, and 1/4 inch slotted/Phillips #2 tip sizes. Key features include a ratcheting handle and a reversing switch. The drawing identifies approved sources of supply, such as WILLIAMS J H INDUSTRIAL PRODUCTS INC, WRIGHT TOOL COMPANY, LLC, and GENERAL TOOLS MFG CO LLC, along with their part numbers and addresses. Revisions to the drawing are noted, indicating updates and changes over time. The distribution statement confirms it is approved for public release.

This government file details a Source Control Drawing for a ratcheting screwdriver with two interchangeable blades, specifically for US Army applications. The drawing, identified as 0712E0003, outlines the specifications for the screwdriver, including its design (magnetic tip for 1/4" hex insert bits), blade lengths (2" and 4" nominal), and materials (steel blades, two-material or textured single-piece handle). It also specifies a corrosion-resistant finish for the blade. The document lists approved standards and specifications, such as ASME Y14.100-2017 and ASME Y14.5-2020. A critical component of this drawing is the identification of an approved source of supply: Snap-On Industrial (CAGE Code 55719), with specific part numbers and descriptions for the soft grip ratcheting handle and magnetic bit holders. The drawing emphasizes that only items described are approved, and substitutes require prior approval. This document serves as a critical reference for procurement and quality control within the US Army's Combat Capabilities Development Command, Armament Center, ensuring the correct and approved tool is utilized.

This government file is a Source Control Drawing for a "SCREWDRIVER TIP HEX BIT," specifically a 1/4" Hex Drive Insert Bit, #0 Phillips. It details the specifications, application, and approved sources for this tool. Key specifications include a 1-inch nominal length, 1/4-inch hex drive size, tool steel material, and a #0 Phillips point size. The drawing, generated from a solid model, is maintained by the design activity and outlines applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It explicitly states that only items described are approved, and substitutes require prior approval. Approved sources include QUALTOOL INC and ZEPHYR MANUFACTURING CO INC., with their respective part numbers, CAGE codes, and addresses. This document ensures standardization and quality control for components used by the US Army Combat Capabilities Development Command, Armament Center, facilitating procurement and consistent application in military contexts.

This government file is a Source Control Drawing for a 1/4" Hex Drive Insert Bit, #1 Phillips, identified as part number 0713A3001. The document specifies design, material, and application details, noting its use by the US Army Combat Capabilities Development Command, Armament Center. It lists applicable standards, including ASME Y14.100-2017 and ASME Y14.5-2020. Key specifications include a nominal length of 1 inch, a 1/4 inch hex drive size, tool steel material, and a #1 Phillips point size. The drawing explicitly states that only described items are approved for use and prohibits substitutes without prior approval. Approved sources of supply are listed, including Snap-On Industrial, Qualtool Inc., and Zephyr Manufacturing Co Inc., along with their respective part numbers and descriptions. The document also includes revision history and drawing approvals, with a distribution statement allowing unlimited public release.

This document is a source control drawing for a 1/4" hex drive insert bit, #2 Phillips. It outlines applicable standards, specifications, and approved sources for the item. The drawing details the bit's type, application, and mechanical properties, including a 1-inch nominal length and #2 Phillips point size. Approved sources include Snap-On Industrial, Qualtool Inc., and Zephyr Manufacturing Co Inc., with corresponding part numbers and vendor descriptions. The document emphasizes that only described items are approved for use and that source identification does not guarantee continued availability. This ensures quality control and adherence to specifications for a critical component within government applications.

This document is a Source Control Drawing (Number 0713A3003) for a 1/4" Hex Drive Insert Bit, #3 Phillips, intended for use by the US Army Combat Capabilities Development Command, Armament Center. It details the specifications for a screwdriver tip hex bit, including its nominal 1-inch length, 1/4-inch hex drive size, tool steel material, and #3 Phillips point size. The drawing lists multiple approved sources of supply, each with their respective part numbers, vendor data (name, address, CAGE code), and vendor descriptions. Key applicable standards/specifications are ASME Y14.100-2017 and ASME Y14.5-2020. The document explicitly states that only items described on the drawing are approved for specified applications, and no substitute items should be used without prior approval. It also clarifies that the identification of approved sources does not guarantee present or continued availability. This drawing is CAD maintained, and any changes must be incorporated by the design activity.

This government file is a Source Control Drawing (DWG NO. 0713A3201) for a 1/4" Hex Drive Insert Bit, #1 Pozidrive. It details the specifications, applications, and approved sources for this specific screwdriver tip hex bit, essential for federal procurement and manufacturing. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), emphasizing that only described items are approved for use and substitutes require prior approval. It provides a list of approved vendors, including SNAP-ON INDUSTRIAL, QUALTOOL INC, and ZEPHYR MANUFACTURING CO INC., with their part numbers, addresses, and CAGE codes. Key specifications include a 1-inch nominal length, 1/4-inch hex drive size, tool steel material, and #1 Pozidrive point size. The drawing also includes revision history and approval signatures from the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER. This document is crucial for ensuring standardization and quality in military and government applications requiring this specific tool.

This document is a Source Control Drawing (SCD) for a screwdriver tip hex bit, specifically a #2 Pozidrive insert bit with a 1/4" hex drive. It outlines the specifications, dimensions (1 inch nominal length, 1/4 inch hex drive), and material (tool steel) for the bit. The drawing also lists approved sources of supply, including Snap-On Industrial, Qualtool Inc., and Zephyr Manufacturing Co Inc., along with their respective part numbers, CAGE codes, and vendor descriptions. The document emphasizes adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards and restricts the use of substitute items without prior approval. This SCD is crucial for procurement and quality control within government applications, ensuring that only approved and compliant components are used. The US Army Combat Capabilities Development Command, Armament Center, is identified as the design activity.

This government file is a Source Control Drawing for a #3 Pozidrive screwdriver bit, detailing its specifications and approved sources of supply. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), material (tool steel), and dimensions (1-inch nominal length, 1/4-inch hex drive). It explicitly states that only items described are approved for use and that substitute items require prior approval. The drawing identifies the US Army Combat Capabilities Development Command, Armament Center, as the design activity. Approved sources include SNAP-ON INDUSTRIAL, QUALTOOL INC, and ZEPHYR MANUFACTURING CO INC., with their respective part numbers, addresses, CAGE codes, and vendor descriptions. The document emphasizes that identification of sources does not guarantee continued availability. The drawing itself is CAD maintained, with changes to be incorporated by the design activity. This file serves as a critical reference for procurement and engineering within federal government applications, ensuring adherence to design and material specifications.

This government file describes a Source Control Drawing for a 1/4" hex insert bit, specifically a Slotted 2 screwdriver tip. The document specifies the physical characteristics of the bit, including a nominal blade width of 1/8 inch and a nominal length of 1 inch. The material is identified as tool steel. It lists two approved sources of supply: QUALTOOL INC. (CAGE Code 053Q2) for part number 0713B3001-1 and ZEPHYR MANUFACTURING CO INC. (CAGE Code 67179) for part number 0713B3001-2. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. Applicable standards/specifications include ASME Y14.100-2017 and ASME Y14.5-2020. The document emphasizes that only described items are approved for use and substitutes require prior approval.

This government file is a source control drawing for a 1/4" Hex Insert Bit, Slotted 5-6. It outlines the specifications, materials, and approved sources of supply for this specific screwdriver tip hex bit. Key specifications include a 1-inch nominal length, 1/4-inch hex drive size, 3/16-inch nominal blade width, and tool steel material. The drawing identifies several approved vendors, including QUAL TOOL INC, APEX TOOL GROUP, LLC, STANLEY PROTO INDUSTRIAL, and SNAP-ON INDUSTRIAL, along with their respective part numbers and descriptions. The document emphasizes that only items described are approved, and substitutes require prior approval. Applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009 are referenced, and the drawing is approved for public release. The US Army Armament Research, Development and Engineering Center is listed as the design activity.

This government file is a source control drawing (0713B3007) for a 1/4" hex insert bit, slotted 8-10, likely used in federal government applications. It outlines the specifications for a screwdriver tip hex bit, including its nominal 1-inch length, 1/4-inch hex drive size, 1/4-inch nominal blade width, and tool steel material. The drawing specifies applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009) and lists approved sources of supply, including Qual Tool Inc., Apex Tool Group, LLC, and Snap-On Industrial, along with their respective part numbers and descriptions. The document emphasizes that only items described are approved, and substitutes require prior approval. It also includes revision history, drawing approvals, and distribution statements, indicating public release. The design activity is the US Army Armament Research, Development and Engineering Center.

This government file is a source control drawing for a Hex Bit Socket, 3/8" Drive, 3/16", identified as part number 0713C1002. The document details the item's specifications, including a nominal length of 2.5 inches, a 3/8-inch drive size, and a 3/16-inch bit size, with a full polish chrome finish. It lists approved sources of supply, such as Snap-On Industrial and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. The drawing also outlines applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, emphasizing that only items described are approved for use and substitutes require prior approval. The document, originating from the US Army Combat Capabilities Development Command Armaments Center, includes revision history and approval dates, highlighting its role in federal procurement and supply chain management for military equipment.

This government file is a Source Control Drawing for a HEX BIT SOCKET, 3/8" DRIVE, 7/32", identified by part number 0713C1003. It details the specifications, approved sources, and revisions for this specific tool. Key specifications include a nominal length of 2.5 inches, a 3/8-inch drive size, and a 7/32-inch bit size, with a full polish chrome finish. Approved sources include SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, each with specific part numbers and vendor descriptions. The document also outlines applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. This drawing emphasizes that only described items are approved for use and that substitute items require prior approval. It serves as a critical reference for procurement and quality assurance within government applications, ensuring standardization and compliance for the specified socket wrench hex bit.

This government file is a Source Control Drawing for a HEX BIT SOCKET, 3/8" DRIVE, 1/4", identifying approved sources of supply. The document details specifications such as a nominal length of 2.5 inches, a 3/8 inch drive size, and a 1/4 inch bit size, with a full polish chrome finish. It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The drawing explicitly states that only described items are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The document lists approved vendors, including SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their part numbers and addresses. Revisions to the drawing are also noted, indicating updates over time. The drawing was generated from a solid model and is CAD maintained by the design activity, the US Army Combat Capabilities Development Command Armaments Center.

This government file is a Source Control Drawing for a HEX BIT SOCKET, 3/8" DRIVE, 5/16", identified as Part No. 0713C1005. The document details specifications such as a nominal length of 2.5 inches, a 3/8-inch drive size, and a 5/16-inch bit size, with a full polish chrome finish. It lists approved sources of supply, including SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their respective part numbers, CAGE codes, and addresses. The drawing also includes revision history, design, and quality approvals from the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. It emphasizes that only items described are approved for use and that substitutes require prior approval. This document serves as a critical reference for procurement and quality control within federal government applications, ensuring adherence to specific design and material standards for this particular tool.

This government file details a Source Control Drawing for a 3/8-inch drive, 3/8-inch hex bit socket, identified by part number 0713C1006. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use, prohibiting substitutes without prior approval. Key specifications include a nominal length of 2.5 inches, a 3/8-inch drive size, a 3/8-inch bit size, and a full polish chrome finish. The drawing lists approved sources of supply, including Snap-On Industrial and Stanley Proto Industrial, along with their respective part numbers and vendor descriptions. The document also includes revision history, detailing changes and approvals from 2015 to 2024. This technical drawing is crucial for procurement and quality control within federal government applications, likely for military or defense-related procurements, ensuring that only specified and approved components are utilized.

This government file is a Source Control Drawing for a 1/2" drive, 1/2" hex bit socket, identified by part number 0713C2004. The document specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved for use. It details the product's specifications, including a nominal length of 3.5 inches, a 1/2 inch drive size, and a 1/2 inch bit size, with a full polish chrome finish. Approved sources of supply are listed, including Snap-On Industrial and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. Revisions to the drawing are also documented, with distribution approved for public release.

This government file details a source control drawing for a HEX BIT SOCKET, 1/2" DRIVE, 9/16". It specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and warns against using substitute items without prior approval. The document lists approved sources, including SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their part numbers, addresses, and CAGE codes. Key specifications for the socket include a nominal length of 3.5 inches, a 1/2-inch drive size, and a 9/16-inch bit size, with a full polish chrome finish. Revisions and approval dates are provided, indicating updates to the product baseline and engineering change proposals. The drawing is maintained by CAD, with changes to be incorporated by the design activity, which is the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER.

This document is a Source Control Drawing (SCD) for a 1/4" hex drive, 3/32" insert bit, produced by the US Army Combat Capabilities Development Command, Armament Center. The drawing, identified as 0713C3003, details the specifications for the insert bit, including a 1-inch length, 1/4-inch drive size, and 3/32-inch tip size with a hex shank. It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The document explicitly states that only items described are approved for use and that substitutes require prior approval. It also provides a list of approved sources of supply, including Qualtool Inc., Zephyr Manufacturing Co. Inc., and Snap-On Industrial, along with their respective part numbers, CAGE codes, and vendor descriptions. The drawing emphasizes that it was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This SCD is crucial for ensuring the procurement of the correct and approved insert bit for military applications.

This document is a Source Control Drawing (SCD) for an insert bit, specifically a 1/4" hex drive, 7/64" insert bit. It details the specifications of the bit, including a 1-inch length, 1/4-inch drive size, and 7/64-inch tip size with a hex shank. The drawing identifies the US Army Combat Capabilities Development Command, Armament Center as the design activity. It lists three approved sources of supply: QUALTOOL INC, ZEPHYR MANUFACTURING CO INC., and SNAP-ON INDUSTRIAL, each with their respective part numbers, CAGE codes, and vendor descriptions. The document also includes applicable standards/specifications (ASME Y14.100-2017 and ASME Y14.5-2020) and notes regarding the use of approved items only, without substitution, and clarifies that the listed sources are not guaranteed for continued availability. The drawing is approved for public release with unlimited distribution.

This government file is a Source Control Drawing (drawing number 0713C3005) for a 1/4" hex drive, 1/8" insert bit, issued by the US Army Combat Capabilities Development Command, Armament Center. The document specifies design approvals, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and crucial notes regarding the use of approved items only, without substitution, and the understanding that listed sources are not guaranteed for continued availability. It details the bit's specifications: 1-inch length, 1/4-inch drive size, 1/8-inch tip size, and hex shank type. The drawing also provides a list of approved sources, including Qualtool Inc., Zephyr Manufacturing Co. Inc., and Snap-On Industrial, complete with part numbers, vendor data, CAGE codes, and descriptions. This document ensures that only compliant components are used in relevant military applications.

This government file is a Source Control Drawing for a 1/4" Hex Drive, Insert Bit, 9/64". It specifies the technical requirements and approved sources for this particular insert bit, which is used on 'MULTIPLE' applications and 'PMIC'. The document details applicable standards/specifications (ASME Y14.100-2017 and ASME Y14.5-2020), and emphasizes that only items described on the drawing are approved for use, prohibiting substitutes without prior approval. It lists three approved sources: QUALTOOL INC, ZEPHYR MANUFACTURING CO INC., and SNAP-ON INDUSTRIAL, along with their respective part numbers, CAGE codes, and vendor descriptions. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. The file includes details about the design activity (US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER) and various approvals.

This government file is a Source Control Drawing (SCD) for a 1/4" Hex Drive, Insert Bit, 3/16". It details the specifications for the insert bit, including its length, drive size, tip size, and shank type. The document also lists approved sources of supply, providing vendor names, addresses, CAGE codes, and part numbers. Key standards and specifications referenced include ASME Y14.100-2017 and ASME Y14.5-2020. The drawing emphasizes that only items described are approved for use and that substitute items require prior approval. This SCD is crucial for procurement and quality assurance in federal government applications, ensuring that components meet exact technical and quality requirements and are sourced from approved vendors for reliability and compliance.

This government file, a Source Control Drawing (0713D3001), details the specifications and approved sources for a 1/4" hex drive, 2mm insert bit. It is part of federal government RFPs, federal grants, and state and local RFPs, issued by the US Army Combat Capabilities Development Command, Armament Center. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), emphasizing that only described items are approved for use and substitutes require prior approval. It lists three approved sources: QUALTOOL INC (CAGE 053Q2), ZEPHYR MANUFACTURING CO INC. (CAGE 67179), and SNAP-ON INDUSTRIAL (CAGE 55719), along with their respective part numbers and descriptions. The drawing also specifies the bit's type, length, drive size, tip size, and shank type. This controlled document ensures the procurement of exact components for specific applications.

This government file, identified as Source Control Drawing 0713D3003, details the specifications and approved sources for a 1/4" hex drive, 3 mm insert bit. It outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use, prohibiting substitutes without prior approval. The document identifies specific approved sources: QUALTOOL INC (CAGE 053Q2), ZEPHYR MANUFACTURING CO INC. (CAGE 67179), and SNAP-ON INDUSTRIAL (CAGE 55719), each with their respective part numbers and descriptions. The drawing was generated from a solid model, indicating that changes must be incorporated by the design activity, which is the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER. This document is crucial for procurement within federal government RFPs, ensuring the use of compliant and approved parts.

This document is a source control drawing for a 1/4" hex drive, 4 MM insert bit, detailing specifications and approved sources. It specifies the bit's length, drive size, tip size, and shank type. The drawing lists three approved manufacturers: QUALTOOL INC, ZEPHYR MANUFACTURING CO INC., and SNAP-ON INDUSTRIAL, along with their CAGE codes and part numbers. The document emphasizes adherence to ASME standards, prohibits the use of substitute items without prior approval, and clarifies that the listed sources are not guaranteed for continued availability. The US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER, is identified as the design activity. This drawing ensures that only approved components are used in specified applications, maintaining quality and compatibility within military systems.

This government file is a Source Control Drawing for a 1/4" HEX DRIVE, INSERT BIT, 5 MM, identified by Contract Number 0713D3005. It details the specifications for this insert bit, including its 1-inch length, 1/4-inch drive size, 5 mm tip size, and hex shank type. The drawing lists three approved sources of supply: QUALTOOL INC (CAGE Code 053Q2), ZEPHYR MANUFACTURING CO INC. (CAGE Code 67179), and SNAP-ON INDUSTRIAL (CAGE Code 55719), along with their respective part numbers and descriptions. The document also outlines applicable standards/specifications (ASME Y14.100-2017 and ASME Y14.5-2020) and notes that only items described are approved, with substitutes requiring prior approval. It also clarifies that the listing of sources does not guarantee continued availability. The drawing was created by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER, and includes drawing and design approvals from various engineers.

This government file is a Source Control Drawing (drawing number 0713D3008) for a 1/4" hex drive, 8 MM insert bit, developed by the US Army Combat Capabilities Development Command, Armament Center. It outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and specifies that only described items are approved for use without prior qualifying activity approval. The drawing includes detailed specifications for the insert bit, such as a 1-inch length, 1/4-inch drive size, and 8 mm tip size with a hex shank. It also lists approved sources of supply, including Qualtool Inc., Zephyr Manufacturing Co. Inc., and Snap-on Industrial, along with their respective part numbers and descriptions. This document serves as a crucial reference for procurement and ensures compliance with design and quality standards for this specific tool component.

This government file is a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T9, with part number 0713E3000. It details the specifications of the Torx bit, including its 1-inch length, 1/4-inch drive size, and T9 tip size. The document also lists three approved sources of supply: QUALTOOL INC (CAGE Code 053Q2), ZEPHYR MANUFACTURING CO INC. (CAGE Code 67179), and SNAP-ON INDUSTRIAL (CAGE Code 55719), along with their respective part numbers and descriptions. The drawing was created by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENT CENTER, and is approved for public release. It adheres to ASME Y14.100-2017 and ASME Y14.5-2020 standards. The document specifies that only items described are approved for use, and substitutes require prior approval. Identification of sources does not guarantee continued availability. The file also indicates that it was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

This government file, identified as a Source Control Drawing 0713E3001, details the specifications and approved sources for a TORX BIT, 1/4" HEX SHANK, T10. It outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use, prohibiting substitutes without prior authorization. The document also clarifies that the identification of approved sources does not guarantee their continued availability. Key specifications for the TORX bit include a length of 1 inch, a 1/4 inch drive size, a T10 tip size, and a hex shank type. Approved sources are listed with part numbers, vendor data (name, address, CAGE code), and vendor part descriptions. The drawing was generated by the US Army Combat Capabilities Development Command, Armament Center, and is approved for public release. The document is crucial for procurement and quality assurance in federal government applications requiring this specific tool.

This government file is a Source Control Drawing for a T-15 Torx insert bit, 1/4" hex shank. It outlines the specifications for the screwdriver tip hex bit, including its length (1 inch nominal), drive size (1/4 inch hex), material (tool steel), and point size (Torx T-15). The document lists three approved sources of supply: Qual Tool Inc., Stanley Proto Industrial, and Snap-On Industrial, along with their part numbers, CAGE codes, and descriptions of the bit. Applicable standards include ASME Y14.100-2013 and ASME Y14.5-2009. The drawing emphasizes that only items described are approved for use and substitutes require prior approval. It also clarifies that listing approved sources does not guarantee continued availability. The document was generated by the US Army Armament Research, Development and Engineering Center and is approved for public release.

This government file is a source control drawing (DWG NO. 0713E3003) for a screwdriver tip hex bit, specifically a TORX T-20 with a 1/4 inch hex drive and 1 inch nominal length, made of tool steel. The document outlines applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009) and specifies that only items described are approved for use. It lists three approved sources of supply: Qual Tool Inc., Stanley Proto Industrial, and Snap-On Industrial, along with their part numbers, CAGE codes, and descriptions. The drawing was approved on October 4, 2018, and generated by the US Army Armament Research, Development and Engineering Center. Distribution is unlimited, indicating it is approved for public release.

This government file, a Source Control Drawing (0713E3004), specifies a Screwdriver Tip Hex Bit (TORX T-25) for federal government applications, likely within an RFP context. It outlines applicable standards (ASME Y14.100-2013, ASME Y14.5-2009), material (tool steel), and dimensions (1 inch nominal length, 1/4 inch hex drive). The document explicitly states that only items described are approved, prohibiting substitutes without prior approval. It lists approved sources of supply, including QUAL TOOL INC, STANLEY PROTO INDUSTRIAL, and SNAP-ON INDUSTRIAL, along with their part numbers and descriptions. The drawing was generated from a solid model, is CAD maintained, and is approved for public release with unlimited distribution. This file is critical for ensuring material and component standardization and quality control in government procurement.

This government file is a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T27, identified by drawing number 0713E3009. The document outlines specific technical specifications for the Torx bit, including a length of 1 inch, a 1/4 inch drive size, a T27 tip size, and a hex shank type. It lists approved sources of supply, including QUALTOOL INC and ZEPHYR MANUFACTURING CO INC., along with their respective part numbers and descriptions. The drawing also specifies applicable standards and specifications, such as ASME Y14.100-2017 and ASME Y14.5-2020. Important notes emphasize that only described items are approved for use, and substitutes require prior approval. The document is approved for public release, indicating its relevance for federal government RFPs, grants, and state/local RFPs where this specific tool or its specifications might be required.

This government file is a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T30, identified by part numbers 0713E3010-1 and 0713E3010-2. It outlines the specifications, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and approved sources of supply. The document specifies the bit's length (1 inch), drive size (1/4 inch), tip size (T30), and hex shank type. Approved vendors include QUALTOOL INC and ZEPHYR MANUFACTURING CO INC. The drawing emphasizes that only described items are approved for use and substitutes require prior approval. It also clarifies that identification of sources does not guarantee continued availability. The document includes revision history, with the latest revision from 2024-12-17. This drawing is crucial for procurement and engineering in federal government applications, ensuring standardized components and quality control.

This government file details a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T40, identified by DWG NO. 0713E3011. The document, originating from the US Army Combat Capabilities Development Command Armaments Center, specifies applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only items described are approved for use. It lists approved sources of supply, including QUALTOOL INC and ZEPHYR MANUFACTURING CO INC., with their respective part numbers and descriptions. Key specifications for the Torx bit include a 1-inch length, 1/4-inch drive size, and T40 tip size with a hex shank. Revisions to the drawing are noted, indicating product baselines and engineering change requests. The document serves as a controlled specification for procurement within government applications.

This government file is a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T45, part number 0713E3012, used by the US Army Combat Capabilities Development Command Armaments Center. The drawing specifies the physical characteristics of the Torx bit, including a 1-inch length, 1/4-inch drive size, T45 tip size, and hex shank type. It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The document also lists approved sources of supply, including QUALTOOL INC and ZEPHYR MANUFACTURING CO INC., along with their respective part numbers and descriptions. It emphasizes that only items described are approved for use and that substitutes require prior approval. Revisions to the product baseline are documented, with the most recent approval on December 17, 2024. This drawing is crucial for procurement and ensures the use of standardized and approved components within military applications.

This document is a Source Control Drawing (SCD) for a TORX BIT, 1/4" HEX SHANK, T50, identified as part number 0713E3014. It specifies design and procurement requirements for the US Army Combat Capabilities Development Command Armaments Center. The drawing details applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), emphasizing that only described items are approved for use and substitutes require prior approval. It also clarifies that listed sources of supply are not guaranteed for continued availability. The document provides a list of approved sources, including QUALTOOL INC and ZEPHYR MANUFACTURING CO INC., with their respective part numbers and descriptions. Key specifications for the Torx bit are provided, including type, length, drive size, tip size, and shank type. Revisions to the drawing are noted, indicating product baseline and subsequent updates. This SCD serves as a critical reference for manufacturing and procurement within the federal government, ensuring product consistency and compliance.

This government file is a Source Control Drawing for a TORX BIT, 1/4" HEX SHANK, T8, identified by drawing number 0713E3019. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), emphasizes that only approved items described are for use, and clarifies that the identification of sources does not guarantee continued availability. Key specifications include a 1-inch length, 1/4-inch drive size, T8 tip size, and hex shank type. Approved sources for this part are Qualtool Inc., Zephyr Manufacturing Co Inc., and Snap-On Industrial, each with specific part numbers and vendor descriptions. The drawing was generated from a solid model, indicating CAD maintenance by the design activity, which is the US Army Combat Capabilities Development Command, Armament Center.

This government file is a Source Control Drawing for a 1/4" hex drive, insert bit with a square tip (R0). It details the specifications, design activity, and approved sources for this specific mechanical part. The drawing includes information on applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), emphasizing that only items described are approved for use and that substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The document lists the US Army Combat Capabilities Development Command, Armament Center, as the design activity and provides a table of approved suppliers, including QUALTOOL INC, ZEPHYR MANUFACTURING CO INC., and SNAP-ON INDUSTRIAL, along with their part numbers and descriptions.

The document is a Source Control Drawing for a 1/4" hex drive, insert bit, square tip, R1. It specifies the technical requirements and approved sources for this particular item, which is used in multiple applications by the US Army Combat Capabilities Development Command, Armament Center. Key specifications include a 1-inch length, 1/4-inch drive size, and a square R1 tip. The drawing lists three approved vendors: Qualtool Inc., Zephyr Manufacturing Co. Inc., and Snap-On Industrial, along with their respective part numbers and descriptions. The document also outlines applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020, and emphasizes that only described items are approved for use without prior qualification. Changes to the drawing are to be incorporated by the design activity.

This government file, identified as Source Control Drawing 0713F3002, details specifications for a 1/4" Hex Drive, Insert Bit, Square Tip, R2. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only items described are approved for use, requiring prior approval for substitutes. The document lists approved sources of supply, including QUALTOOL INC, ZEPHYR MANUFACTURING CO INC., and SNAP-ON INDUSTRIAL, with their respective part numbers, vendor data, and CAGE codes. Key specifications for the insert bit include a 1-inch length, 1/4-inch drive size, square R2 tip size, and hex shank type. The drawing was created by the US ARMY Combat Capabilities Development Command, Armament Center, and is approved for public release, indicating its use in federal procurement or supply chain management.

This government file is a Source Control Drawing (SCD) for a 1/4" Hex Drive, Insert Bit, Square Tip, R3. It details the specifications, design activity, and approved sources for this specific mechanical component. The document lists applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and provides critical notes regarding the use of approved items only, without substitution, and clarifies that the identification of sources does not guarantee continued availability. Key specifications include a 1-inch length, 1/4-inch drive size, square R3 tip size, and hex shank type. Approved sources include QUALTOOL INC, ZEPHYR MANUFACTURING CO INC, and SNAP-ON INDUSTRIAL, each with their respective part numbers, vendor data, and CAGE codes. The drawing also includes revision history and approval signatures from various engineering disciplines. This document serves as a crucial reference for procurement and engineering within federal government applications, ensuring compliance and quality control for the specified part.

The document is a Source Control Drawing (SCD) for an insert bit, specifically a 1/4" hex drive with a 1/4" square drive, designed for military applications. It details the technical specifications, dimensions, and approved sources of supply for this component. Key specifications include a 1-inch length, 1/4-inch drive size, and a hex shank with a retention ball. The drawing lists three approved vendors: Qualtool Inc., Zephyr Manufacturing Co Inc., and Snap-On Industrial, along with their respective part numbers, CAGE codes, and descriptions. The document emphasizes adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards, and restricts the use of substitute items without prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. This SCD is critical for ensuring the correct and approved components are used in relevant military equipment, maintaining supply chain integrity and operational readiness.

This government file is a Source Control Drawing for a 5/16-inch, 12-point combination wrench, outlining its specifications and approved sources. The document details the wrench's length (5 inches minimum), wrench size (5/16 inch), offset (15 degrees nominal), and finish (full polish chrome), noting its double hexagon (12-point) special feature. It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, as well as AMSE B107.100 (B107.6). The drawing explicitly states that only items described are approved for use and that substitutions require prior approval. Approved sources include Snap-On Industrial and Stanley Black & Decker, Inc. dba MAC Tools, with specific vendor part numbers and descriptions. The file also includes revision history, design, and drawing approvals, emphasizing its role in federal government procurement for military applications.

This government file is a Source Control Drawing for a 11/32", 12 PT combination wrench (drawing number 0714A0002). It specifies the design, dimensions, and approved sources for the wrench, intended for use by the US Army Combat Capabilities Development Command Armaments Center. Key specifications include a minimum length of 5.5 inches, an 11/32 inch wrench size, a 15-degree nominal offset, and a full polish chrome finish with a double hexagon (12 PT) special feature. The document lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020, and approved sources such as Snap-On Industrial and Stanley Black & Decker, Inc. It also includes revision history and notes regarding the use of substitute items and the guarantee of supply availability.

This government file is a source control drawing for a 3/8-inch, 12-point combination wrench, outlining design specifications, approved sources, and applicable standards. Key specifications include a minimum length of 5.75 inches, a 15-degree nominal offset, a full polish chrome finish, and a double hexagon (12-point) special feature. The drawing references ASME Y14.100-2017 and ASME Y14.5-2020 for applicable standards. Approved sources for the wrench include Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, with specific part numbers and vendor details provided. The document emphasizes that only items described are approved for use and that substitute items require prior approval. This drawing serves as a critical reference for procurement and manufacturing within federal government contracts, ensuring adherence to design and quality specifications for the specified combination wrench.

This government file is a source control drawing for a 7/16-inch, 12-point combination wrench, outlining its specifications and approved sources. The document details the wrench's length, size, offset, finish, and special features, referencing applicable standards like ASME B107.100. It lists multiple approved vendors such as Snap-On Industrial and Stanley Proto Industrial, providing their part numbers, CAGE codes, and addresses. The drawing also includes important notes regarding applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), the restriction on substitute items without prior approval, and a disclaimer about the guaranteed availability of listed sources. This document is crucial for procurement and quality control within government applications, ensuring that only approved and compliant tools are utilized.

This government document is a Source Control Drawing for a 1/2-inch, 12-point combination wrench, outlining its specifications and approved manufacturers. The drawing details the wrench's length, size, offset, finish, and special features, emphasizing adherence to ASME standards. It lists multiple approved sources, including Snap-On Industrial and Stanley Black & Decker, with their respective part numbers, CAGE codes, and vendor descriptions. The document also includes revision history, design approvals, and distribution statements, indicating its approval for public release. This technical drawing serves as a critical reference for procurement and quality assurance, ensuring that only approved items and sources are utilized for this specific tool in government applications.

This government file is a source control drawing for a 9/16" 12-point combination wrench, outlining the specifications and approved sources of supply. The document details key characteristics such as a minimum length of 7.5 inches, a 15-degree nominal offset, and a full polish chrome finish, with the wrench featuring a double hexagon (12 PT) design. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). Approved sources include Snap-On Industrial and Stanley Proto Industrial, with specific part numbers and vendor descriptions provided. The drawing emphasizes that only described items are approved for use and any substitute requires prior approval. The document serves to standardize the procurement and use of this specific tool within federal applications.

This government file details a source control drawing for a 5/8-inch, 12-point combination wrench, outlining its specifications and approved manufacturers. The document, identified as DRAWING SIZE C, specifies key features such as an 8-inch minimum length, 15-degree nominal offset, and a full polish chrome finish, adhering to ASME B107.100 (B107.6) standards. It lists multiple approved sources including Snap-On Industrial and Stanley Black & Decker, Inc., providing their part numbers and addresses. The drawing also includes revision history and distribution statements, indicating it is approved for public release. The purpose of this document is to standardize and control the procurement of this specific tool for US Army applications, ensuring quality and interoperability. It is a critical reference for federal government RFPs, ensuring that all procured wrenches meet the specified criteria.

This government file is a source control drawing for a Combination Wrench, 11/16", 12 PT, identified by drawing number 0714A0008. It outlines the specifications, applicable standards, and approved sources for this specific tool. Key specifications include a minimum length of 8.75 inches, an 11/16 inch wrench size, a 15-degree nominal offset, a full polish chrome finish, and a double hexagon (12 PT) special feature. Applicable standards are ASME B107.100 (B107.6), ASME Y14.100-2017, and ASME Y14.5-2020. The document lists multiple approved vendors such as Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers, CAGE codes, and descriptions. It emphasizes that only items described on the drawing are approved for use and that substitute items require prior approval. The drawing also includes revision history and distribution statements, indicating it is approved for public release.

This government document is a Source Control Drawing for a 3/4", 12 PT Combination Wrench, detailing its design, specifications, and approved sources of supply for federal government applications, particularly for the US Army Combat Capabilities Development Command Armaments Center. The drawing outlines key specifications such as a minimum length of 9.75 inches, a 3/4-inch wrench size, a 15-degree nominal offset, a full polish chrome finish, and a double hexagon (12-point) special feature. It references applicable standards like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). The document lists approved vendors, including Snap-On Industrial and Stanley Black & Decker, Inc. (DBA MAC Tools), along with their specific part numbers and descriptions. It emphasizes that only described items are approved for use and that substitutes require prior approval. The drawing is CAD-maintained, with revisions documented, ensuring strict control over the item's design and procurement.

This government document is a source control drawing (DWG NO. 0714A0010) for a 13/16-inch, 12-point combination wrench, outlining its specifications and approved manufacturers. The drawing, generated by the US Army Combat Capabilities Development Command Armaments Center, details the wrench's length (10.25 inches minimum), offset (15 degrees nominal), and full polish chrome finish. It references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The document lists approved sources, including Stanley Black & Decker, Inc. (DBA MAC Tools) and Snap-On Industrial, along with their respective part numbers and descriptions. It emphasizes that only items described are approved for use and that substitutes require prior approval. This drawing is crucial for procurement and quality control within federal government applications requiring this specific tool.

This government file details the specifications for a "COMBINATION WRENCH, 7/8", 12 PT" for the US Army Combat Capabilities Development Command Armaments Center. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, ASME B107.100), key specifications including a minimum length of 11.5 inches, a 7/8-inch wrench size, a 15-degree nominal offset, a full polish chrome finish, and a double hexagon (12 PT) special feature. It also lists approved sources of supply, including Stanley Black & Decker, Inc. (DBA Mac Tools) and Snap-On Industrial, along with their respective part numbers and descriptions. The document emphasizes that only described items are approved for use and substitutes require prior approval. Distribution is unlimited, indicating it is approved for public release.

The document is a Source Control Drawing for a 15/16", 12-point combination wrench, outlining the technical specifications and approved sources of supply for this item. It specifies dimensions, offset, finish, and special features, along with applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The drawing identifies multiple approved vendors, including Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, listing their part numbers and descriptions. It emphasizes that only items described on this drawing are approved for use and that substitutions require prior approval. The document also includes revision history and distribution statements, making it a critical reference for procurement and engineering within government applications.

This government file is a source control drawing for a "COMBINATION WRENCH, 1", 12 PT," outlining its specifications, approved sources of supply, and applicable standards. The document details the wrench's length (13.5 inch min), wrench size (1 inch), offset (15 degrees nominal), finish (full polish chrome), and special features (double hexagon/12 pt). It references ASME Y14.100-2017 and ASME Y14.5-2020 as applicable standards. Approved sources include Snap-On Industrial and Stanley Proto Industrial, with specific part numbers and vendor descriptions provided. The drawing emphasizes that only described items are approved for use and that substitute items require prior approval. This document ensures standardization and quality control for the procurement of this specific tool within government applications, likely for federal contracts or procurements related to military or defense activities, given the "US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER" designation.

This government file is a Source Control Drawing for a 6MM, 12-point combination wrench, outlining its specifications and approved sources of supply. The document details the wrench's length, size, offset, finish, and special features, along with applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It lists multiple approved vendors, including Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, with their respective part numbers and descriptions. The drawing emphasizes that only items described are approved, and substitutes require prior approval. This file is crucial for procurement and quality control, ensuring that the correct tool from an approved manufacturer is used in government applications, reflecting the stringent requirements typical in federal contracts and RFPs.

This government file is a source control drawing for a 7mm, 12-point combination wrench, outlining its design, specifications, and approved sources of supply. The document details technical requirements such as length, wrench size, offset, finish, and special features, referencing applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It lists approved manufacturers, including Snap-on Industrial and Stanley Black & Decker, DBA Mac Tools, along with their part numbers and descriptions. The drawing also specifies that only described items are approved for use, and substitutes require prior approval. This document serves as a critical reference for procurement and engineering within government applications, ensuring standardization and quality control for the specified tool.

This government file, identified as Drawing No. 0714A1002, is a Source Control Drawing for an 8mm, 12-point combination wrench. It details the specifications for the wrench, including a length of 137 mm (5.39 inches) minimum, an 8 mm wrench size, a 15-degree nominal offset, and a full polish chrome finish with a double hexagon (12-point) special feature. The document lists applicable standards/specifications such as ASME Y14.100-2017 and ASME Y14.5-2020, as well as AMSE B107.100 (B107.6). It also provides a list of approved sources of supply, including Snap-On Industrial and Stanley Black & Decker, DBA Mac Tools, along with their respective part numbers, CAGE codes, and vendor descriptions. The drawing explicitly states that only items described are approved for use and that substitutes require prior approval. This document is crucial for procurement and ensures that only specified and approved wrenches are used in government applications.

The document is a source control drawing for a 9mm, 12-point combination wrench, outlining its design, specifications, and approved sources of supply. It details the wrench's length, size, offset, finish, and special features. Key specifications include a minimum length of 143 MM (5.6299 INCH), a 9 MM wrench size, and a 15-degree nominal offset, with a full polish chrome finish and a double hexagon (12 PT) design. The drawing lists multiple approved vendors, including Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), along with their respective part numbers, CAGE codes, and descriptions. Applicable standards such as ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6) are referenced. The document emphasizes that only items described are approved for use and that substitute items require prior approval. This drawing is crucial for procurement and quality control within government applications, ensuring adherence to precise specifications for the wrench.

This government file, identified as Source Control Drawing 0714A1004, details specifications for a 10mm, 12-point combination wrench. The document provides design and engineering approvals, revision history, and applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. Key specifications include a minimum length of 163mm (6.42 inches), a 10mm wrench size, a 15-degree nominal offset, a full polish chrome finish, and a double hexagon (12-point) special feature. The drawing lists approved sources of supply, including Snap-On Industrial and Stanley Proto Industrial, along with their respective part numbers and descriptions. It emphasizes that only items described are approved for use and that substitutes require prior approval. This document is crucial for procurement and quality control within federal government applications, likely for military or defense contracts, ensuring the use of approved tools meeting specific design and performance criteria.

This government file, identified as Drawing No. 0714A1005, is a Source Control Drawing for an 11mm, 12-point combination wrench. It outlines the specifications, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100), and approved sources for this specific tool. The document details the wrench's length, size, offset, finish, and special features. It lists approved manufacturers such as Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), along with their part numbers and descriptions. The drawing also specifies that only items described are approved for use, and substitutes require prior approval. This document serves as a critical reference for procurement and quality control within government applications, ensuring consistency and adherence to specified standards for the combination wrench.

This government file is a source control drawing for a 12mm, 12-point combination wrench, outlining its specifications and approved manufacturers. The document details the wrench's required length (190 mm minimum), 12 mm size, 15-degree nominal offset, full polish chrome finish, and double hexagon (12 PT) special features. It references applicable standards like ASME B107.100 and ASME Y14.100-2017. Approved sources include Snap-On Industrial and Stanley Black & Decker (DBA Mac Tools and Stanley Proto Industrial), providing their addresses, CAGE codes, and specific vendor part numbers with descriptions. The drawing also includes revision history, design approvals, and distribution statements, indicating its approval for public release and unlimited distribution. The document emphasizes that only described items are approved for use and substitutes require prior approval.

This government file, identified as a Source Control Drawing (DWG NO. 0714A1007), outlines specifications and approved sources for a 13MM, 12-point combination wrench. The drawing details the wrench's physical characteristics, including a minimum length of 200 MM (7.87 INCH), a 13 MM wrench size, a 15-degree nominal offset, and a full polish chrome finish with double hexagon (12 PT) special features. Applicable standards and specifications include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). The document lists approved sources, including SNAP-ON INDUSTRIAL and STANLEY BLACK & DECKER, INC. DBA MAC TOOLS, along with their respective part numbers, CAGE codes, and vendor descriptions. It emphasizes that only items described are approved and substitutes require prior approval. The document also states that the identification of approved sources does not guarantee continued availability. This drawing is critical for procurement and quality assurance in federal government applications, likely for military or defense-related equipment maintenance.

This government file, a Source Control Drawing, details the specifications and approved sources for a 14mm, 12-point combination wrench. The document provides technical specifications such as a minimum length of 214mm (8.42 inches), a 15-degree nominal offset, and a full polish chrome finish with a double hexagon (12-point) special feature. It references applicable standards like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). Approved sources include Snap-On Industrial and Stanley Black & Decker, Inc. dba Mac Tools, along with their respective part numbers and CAGE codes. The drawing also includes important notes regarding the use of approved items only, the necessity of prior approval for substitute items, and a disclaimer about the guaranteed availability of listed sources. This document is crucial for procurement processes within federal government RFPs, ensuring that only specified and approved tools are utilized for designated applications.

This government file is a Source Control Drawing (SCD) for a 15mm, 12-point combination wrench, outlining technical specifications and approved manufacturers. It details requirements such as a minimum length of 226 mm (8.89 inches), a 15-degree nominal offset, and a full polish chrome finish, adhering to ASME B107.100 (B107.6) standards. The document lists multiple approved sources, including Snap-On Industrial and Stanley Black & Decker (DBA Mac Tools and Stanley Proto Industrial), providing their addresses, CAGE codes, and specific part numbers. The drawing also specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It emphasizes that only items described are approved, prohibiting substitutes without prior approval, and clarifies that listed sources are not guaranteed for continued availability. The document has undergone revisions, with the latest update on December 17, 2024.

This document is a Source Control Drawing for a 16mm, 12-point combination wrench, outlining its design, specifications, and approved manufacturers. It details essential characteristics such as a minimum length of 231 mm (9.09 inches), a 16mm wrench size, a 15-degree nominal offset, and a full polish chrome finish, with a double hexagon (12-point) special feature. The drawing references applicable standards like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). It lists approved sources, including Snap-on Industrial and Stanley Black & Decker (DBA Mac Tools), with specific part numbers, CAGE codes, and vendor descriptions. The document emphasizes that only items described are approved for use and that substitutes require prior approval. This drawing is crucial for procurement and quality assurance in federal government applications, ensuring standardized tools meet precise technical and quality specifications.

This government file is a source control drawing for a 17mm, 12-point combination wrench, outlining its specifications and approved manufacturers. The document specifies mechanical properties, dimensions, and materials, with a focus on compliance with ASME Y14.100-2017 and ASME Y14.5-2020 standards. It lists multiple approved sources, including Snap-On Industrial and Stanley Black & Decker, providing their part numbers and addresses. The drawing also includes a distribution statement allowing public release. This technical document ensures that only approved items are used in specified applications, making it critical for procurement and quality assurance in government projects, likely within the defense or combat capabilities sectors.

This government file details a source control drawing for an 18mm, 12-point combination wrench, primarily for use by the US Army Combat Capabilities Development Command Armaments Center. The document specifies design approvals, revisions, and key characteristics such as a minimum length of 250mm, an 18mm wrench size, a 15-degree nominal offset, and a full polish chrome finish. It also mandates adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards. The drawing lists approved sources of supply, including Snap-on Industrial and Stanley Black & Decker, Inc., along with their respective part numbers and descriptions. A critical note emphasizes that only items described are approved for use, and substitutes require prior approval from the qualifying activity. This document serves as a comprehensive reference for procurement and use of this specific tool within military applications.

This government file is a source control drawing for a 19mm, 12-point combination wrench, outlining specifications and approved sources. It details the wrench's length, size, offset, finish, and special features, along with applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. The document lists approved vendors such as Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), including their part numbers, CAGE codes, and addresses. It also provides revision history, drawn by, and approval information. This drawing ensures that only approved items are used and clarifies that source identification does not guarantee continued availability.

This government file is a Source Control Drawing for a 21mm, 12-point combination wrench, outlining its specifications and approved sources. The document details the wrench's length, size, offset, finish, and special features, referencing ASME B107.100 (B107.6) as an applicable standard. It lists several approved vendors, including Snap-On Industrial and Stanley Black & Decker (DBA Mac Tools), along with their specific part numbers and descriptions. The drawing also includes general notes regarding applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), the requirement for prior approval for substitute items, and a disclaimer about the guaranteed availability of listed sources. This document serves as a crucial reference for procurement and engineering within the US Army Combat Capabilities Development Command Armaments Center, ensuring the use of approved and standardized tools.

This government file is a Source Control Drawing for a 22mm, 12-point combination wrench, detailing its specifications, approved manufacturers, and applicable standards. The document outlines essential characteristics such as a minimum length of 305 MM (12.00 inches), a 22 MM wrench size, a 15-degree nominal offset, and a full polish chrome finish with special features like a double hexagon (12 PT). It references ASME Y14.100-2017 and ASME Y14.5-2020 as applicable standards. The approved sources include Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), with specific part numbers and vendor descriptions. The drawing also specifies that only items described are approved for use and that substitutions require prior approval. This document is crucial for procurement and quality assurance in federal government applications.

The document is a Source Control Drawing (0714A1018) for a 24MM, 12 PT Combination Wrench, approved for public release. It details the wrench's specifications, including a minimum length of 333 MM (13.11 inches), a 24 MM wrench size, a 15-degree nominal offset, and a full polish chrome finish with double hexagon (12 PT) special features. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.6). The drawing lists approved sources of supply, including Snap-On Industrial and Stanley Black & Decker, Inc. (DBA Mac Tools), with specific part numbers and vendor descriptions. The U.S. Army Combat Capabilities Development Command Armaments Center is listed as the design activity. The document emphasizes that only items described are approved, and substitutes require prior approval.

This government document is a source control drawing for a 27mm, 12-point combination wrench, outlining its specifications and approved manufacturers. It details essential characteristics such as a minimum length of 374mm (14.72 inches), a nominal 15-degree offset, and a full polish chrome finish. The drawing also specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. Approved sources include Snap-On Industrial and Stanley Black & Decker, Inc., with corresponding part numbers and vendor descriptions. The document emphasizes that only items described are approved for use and that substitute items require prior approval. This drawing serves as a critical reference for procurement and quality assurance within federal government applications, ensuring compliance and interchangeability for this specific tool.

The document is a source control drawing (DWG NO. 0714A1024) for a 30MM, 12-point combination wrench, approved for public release. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and specifies that only items described are approved for use, with no substitutes allowed without prior approval. The drawing details the wrench's specifications, including a minimum length of 414 MM (16.30 inches), a 30MM wrench size, a 15-degree nominal offset, and a full polish chrome finish with a double hexagon (12 PT) special feature. It also lists approved sources of supply, including Snap-On Industrial and Stanley Black & Decker, Inc. (DBA MAC Tools), providing their addresses, CAGE codes, part numbers, and descriptions. The document emphasizes that the identification of approved sources does not guarantee continued availability.

This government file details a source control drawing for a "WRENCH, DOUBLE OPEN END, 3/8" X 7/16"". It specifies the wrench's physical characteristics, including a minimum length of 4.375 inches, 15-degree offset on both ends, and a chrome finish. Applicable standards include ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.100 (B107.39), TYPE I. The document lists approved sources of supply, such as SNAP-ON INDUSTRIAL and STANLEY PROTO INDUSTRIAL, along with their part numbers and vendor descriptions. Revisions to the drawing are documented, including product baselines and engineering change proposals. The file emphasizes that only items described are approved for use and that substitute items require prior approval. This drawing is for military use, specifically for the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER.

This government file is a Source Control Drawing for a Double Open End Wrench, 1/2" X 9/16". It details the design, specifications, and approved sources for this specific tool. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), emphasizing that only items described are approved for use and that substitutes require prior approval. Key specifications include a length of 5.5 inches minimum, a 15-degree offset on both ends, and a chrome finish, adhering to ASME B107.100 (B107.39), Type I. The drawing lists approved sources like Snap-On Industrial and Stanley Proto Industrial, along with their part numbers and vendor descriptions. The document also includes revision history and drawing approvals, indicating its use by the US Army Combat Capabilities Development Command Armaments Center. This file ensures that only specified and approved wrenches are used in government applications, maintaining quality and compatibility.

This document is a source control drawing for a "WRENCH, DOUBLE OPEN END, 5/8" X 11/16"" for the US Army Combat Capabilities Development Command Armaments Center. It details the wrench's specifications, including its double open-end type, minimum length of 7 inches, 5/8 x 11/16 inch wrench size, 15-degree offset on both ends, and chrome finish. The drawing references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020, as well as ASME B107.100 (B107.39), Type I for the wrench itself. It lists approved sources of supply, including Snap-On Industrial and Stanley Proto Industrial, along with their part numbers and descriptions. The document emphasizes that only items described are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing includes revision history, approval dates, and details regarding its generation from a solid model maintained by CAD.

This government file details a Source Control Drawing for an 8-inch adjustable wrench, part number 0714E0012, manufactured by Snap-On Industrial. The document specifies the wrench's characteristics, including an 8-inch size, 0.947-inch minimum jaw capacity, and a chrome finish, adhering to ASME B107.100 (B107.8), Type I specifications. It was designed by the US Army Combat Capabilities Development Command, Armaments Center, and approved for public release. The drawing includes revision history, applicable standards like ASME Y14.100-2017 and Y14.5-2020, and notes regarding approved items and sources of supply. This document is crucial for procurement and quality assurance in federal government applications, ensuring that only approved and specified tools are used.

This document is a source control drawing for a 12-inch adjustable wrench, contract number DAI, drawing number 0714E0014, and CAGE Code 59678. It details the wrench's specifications, including a 12-inch size, 1.321-inch minimum jaw capacity, and chrome finish, adhering to ASME B107.100 (B107.8), Type I standards. The drawing specifies Snap-on Industrial as an approved source of supply. It also outlines applicable standards, such as ASME Y14.100-2017 and ASME Y14.5-2020, emphasizing that only described items are approved for use. The document was generated from a solid model, indicating CAD maintenance by the US Army Combat Capabilities Development Command Armaments Center. This drawing ensures quality control and standardization for military procurement.

This government file is a source control drawing for an L-handle, ball-end hex key set, essential for federal government RFPs, federal grants, and state/local RFPs. It details the specifications for a 13-piece set ranging from .050 to 3/8 inches, featuring an L-handle, ball-end, and a plastic holder with individual storage positions. The document lists multiple approved sources, including Bondhus Corp, Eklind Tool Co, Stanley Proto Industrial, Stanley Black & Decker, Inc. DBA Mac Tools, Snap-On Industrial, and Williams J H Industrial Products Inc, each with specific part numbers and descriptions. It emphasizes that only items described are approved for use, and substitutes require prior approval. Applicable standards include ASME Y14.100-2017 and ASME Y14.5-2020. The drawing also includes revision history and distribution statements, indicating approval for public release.

This document is a technical drawing for a HEX KEY SET, METRIC, BALL END, identified by contract number 0716B1001 and CAGE Code 59678. It was drawn by V. VONDERA on March 9, 2018, and approved by J. MILLER. The set includes various sizes of ball end hex keys ranging from 1.5 MM to 12 MM, along with a hex bit holder. The drawing specifies that all items must be a matched set from the same manufacturer and brand. It adheres to ASME Y14.100-2013 and ASME Y14.5-2009 standards. Distribution is unlimited, as approved for public release. The document also lists revision history, with the latest revision on December 17, 2024.

This government file is a Source Control Drawing for a 12 MM Ball End Hex Key, part number 0716B1001-10, used by the US Army Combat Capabilities Development Command Armaments Center. The drawing specifies the key's metric size (12 MM), nominal length (8.23 inches), steel material, and black oxide finish. It lists applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and notes that only items described are approved, prohibiting substitutes without prior approval. The document also provides a list of approved sources of supply, including EKLIND TOOL CO and BONDHUS CORP, with their respective CAGE codes and vendor part numbers. Revisions to the drawing are documented, with the latest dated 2024-12-17. The drawing emphasizes that it was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. It is approved for public release with unlimited distribution.

This government file is a Source Control Drawing for a 1.5 MM Ball End Hex Key, outlining its specifications and approved sources of supply. Key specifications include a 1.5 MM metric size, 3-inch nominal length, steel material, and black oxide finish. The document lists two approved suppliers: Eklind Tool Co. and Bondhus Corp., along with their part numbers, addresses, and CAGE codes. It also references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. The drawing emphasizes that only items described are approved for use and that substitute items require prior approval. This document serves as a detailed procurement and engineering reference for the specific hex key, ensuring quality control and adherence to design standards within government applications.

This government file, identified as Source Control Drawing 0716B1001-3, details the specifications for a 2 MM Ball End Hex Key. It is an engineering drawing generated from a solid model, indicating it is CAD maintained and changes must be incorporated by the design activity. The document specifies the L-handle ball-end hex key's metric size (2 MM), nominal length (3.2 inches), steel material, and black oxide finish. It lists approved sources of supply, including Eklind Tool Co and Bondhus Corp, with their respective CAGE codes, part numbers, and addresses. The drawing also references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. Important notes include restrictions on using substitute items without prior approval and a disclaimer regarding the guaranteed availability of approved sources. Revisions to the drawing are also documented.

This government file details a Source Control Drawing for a 2.5 MM Ball End Hex Key, outlining its specifications and approved sources of supply. The document, identified by DWG NO. 0716B1001-4 and CAGE CODE 59678, specifies the hex key as a metric, L-handle tool, 2.5 mm in size, with a nominal length of 3.5 inches, made of steel with a black oxide finish. It lists Eklind Tool Co and Bondhus Corp as approved vendors, including their part numbers and CAGE codes. The drawing adheres to ASME Y14.100-2017 and ASME Y14.5-2020 standards. This file is crucial for procurement and quality control, ensuring that only approved and compliant items are used, and is relevant for federal government RFPs related to military or defense contracting.

This document is a Source Control Drawing (SCD) for a 3 MM Ball End Hex Key, identified by part number 0716B1001-5, developed by the US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. It specifies the technical requirements for the L-handle ball-end hex key, including its metric size (3 MM), nominal length (3.9 inches), material (steel), and finish (black oxide). The drawing lists approved sources of supply, such as Eklind Tool Co and Bondhus Corp, along with their CAGE codes and vendor part numbers. The document emphasizes that only items described are approved for use, and substitutes require prior approval. It also states that the identification of approved sources does not guarantee continued availability. Applicable standards include ASME Y14.100-2017 and ASME Y14.5-2020. The drawing has undergone revisions, with the latest dated December 17, 2024.

This government file is a Source Control Drawing for a 4 MM Ball End Hex Key, outlining its specifications and approved manufacturers. The document details the physical characteristics of the hex key, including its metric size of 4 MM, a nominal length of 4.3 inches, steel material, and a black oxide finish. It also references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. The drawing explicitly states that only items described are approved for use and that substitutes require prior approval. Approved sources of supply are listed, including EKLIND TOOL CO and BONDHUS CORP, along with their CAGE codes and vendor part numbers. The document underwent revisions, with the latest dated 2024-12-17. This drawing serves as a critical document for procurement and quality control within government applications, ensuring the use of approved and standardized components.

This document is a Source Control Drawing (SCD) for a 5 MM Ball End Hex Key, outlining its specifications, approved sources, and relevant standards. The hex key is a metric, L-handle type, 5 MM in size and 5 inches nominal in length, made of steel with a black oxide finish. It details two approved manufacturers: Eklind Tool Co. (CAGE Code 31734) and Bondhus Corp (CAGE Code 10964), along with their respective part numbers and addresses. The drawing also references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. It emphasizes that only items described are approved for use and any substitutes require prior approval. The document was generated by the US Army Combat Capabilities Development Command Armaments Center and includes revision history, with the latest revision in 2024. This SCD ensures quality and standardization for this specific tool within government applications.

This government file details the specifications for a 6 MM Ball End Hex Key, identified by part number 0716B1001-8. It functions as a Source Control Drawing, outlining the design and approval process for this specific mechanical part. The document specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. Key features include its metric 6 MM size, nominal 5.4-inch length, steel material, and black oxide finish. Approved sources of supply are listed, including Eklind Tool Co and Bondhus Corp, along with their respective part numbers and CAGE codes. The document also notes that only items described are approved, prohibiting substitutes without prior approval. Revisions to the product baseline are documented, with the most recent in 2024. This drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

This government file is a Source Control Drawing for a 10 MM Ball End Hex Key, detailing its design, specifications, and approved sources of supply. The document, maintained by the US Army Combat Capabilities Development Command Armaments Center, specifies a metric L-handle ball-end hex key, 10 mm in size, with a nominal length of 6.6 inches, made of steel with a black oxide finish. It lists two approved vendors: EKLIND TOOL CO and BONDHUS CORP. The drawing also outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), restrictions on substitute items without prior approval, and clarifies that the listed sources are not a guarantee of continued availability. The document has undergone revisions, with the latest in 2024, indicating ongoing management of the product baseline.

This government drawing, 0718A0000, details the specifications and approved sources for 10-inch adjustable joint, multiple groove pliers, also referred to as source control drawing. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only described items are approved for use without prior consent. Key specifications include a 10-inch nominal size, 1.7-inch minimum jaw capacity, 5 minimum jaw positions, and features like an angle nose, multiple grooves and tongue, straight serrated jaws, and comfort grips. Approved sources include CHANNELLOCK INC and STANLEY PROTO INDUSTRIAL, with specific part numbers and vendor descriptions. The drawing was generated from a solid model, indicating its technical nature for procurement or manufacturing within the US Army Combat Capabilities Development Command Armaments Center.

This government file, a Source Control Drawing (DWG NO. 0718A1001), details the specifications and approved sources for "PLIERS, SLIP JOINT, COMBINATION JAW, 6"". The document outlines key characteristics such as a 6-inch nominal size, a minimum of two jaw positions, and special features including combination jaws, straight nose, serrated jaws, regular style, and comfort grips. Applicable standards/specifications like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.500 (B107.23) are referenced. The drawing lists several approved sources, including Snap-On Industrial, Stanley Proto Industrial, American Kal Enterprises, Inc. (DBA Pro America Premium Tools), Channellock Inc, Wilde Tool Co., Inc., and Stanley Black & Decker, Inc. (DBA Mac Tools), along with their CAGE codes, part numbers, and descriptions. The document emphasizes that only items described are approved, and substitutes require prior approval. It also clarifies that the listing of sources does not guarantee continued availability.

This government file is a source control drawing for 9-inch multiple-position electrical connector pliers, detailing their specifications, approved sources, and revisions. The document specifies the tool's length, jaw capacity (3/4 to 2-1/2 inches minimum), and a minimum of four jaw positions, along with the requirement for replaceable non-marring jaws. It lists applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. Approved sources include Stanley Proto Industrial and Stride Tool Inc., providing part numbers and vendor descriptions. The drawing also includes a distribution statement allowing unlimited public release and emphasizes that only described items are approved for use, with no substitutes permitted without prior approval. Revisions track product baseline changes and engineering change proposals.

This government file is a source control drawing for 6-inch long nose pliers with cutters, designated as Drawing No. 0718C0002. It outlines the specifications, approved sources, and design parameters for this tool. The drawing was created by the US Army Combat Capabilities Development Command Armaments Center. Key specifications include a 6-inch nominal size, long nose, cutter, and comfort grips, adhering to ASME B107.500 (B107.13), Type III, Class 1, Style B standards. The document lists multiple approved manufacturers, including American Kal Enterprises, Inc. (DBA Pro America Premium Tools), Snap-On Industrial, Channellock Inc., and Stanley Proto Industrial, along with their respective part numbers and descriptions. The drawing includes revision history, design approvals, and distribution statements, indicating it is approved for public release. It emphasizes that only items described are approved for use and substitutes require prior approval.

This government file details a source control drawing for "PLIERS, NEEDLE NOSE, 6 1/2 INCH" with contract number 0718C0003, managed by the US Army Combat Capabilities Development Command Armaments Center. The document specifies applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It emphasizes that only items described are approved, and substitutes require prior approval. The drawing includes specifications for extra thin needle nose pliers with comfort grips, adhering to ASME B107.500 (B107.13), Type III, Class 4. It also lists an approved source, STANLEY PROTO INDUSTRIAL, with their part number J223G. Revisions to the drawing are noted, including product baseline changes and updates. The document underscores that it was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity.

This government file details the specifications for 7-inch diagonal cutting pliers, identified as "Pliers, Diagonal Cutting, 7"" by the US Army Combat Capabilities Development Command Armaments Center. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only items described are approved for use. It lists specific product characteristics, including a nominal 7-inch size, 1/2-inch minimum jaw opening, regular nose, standard cutting edges, heavy-duty high-leverage design, and comfort grips. The document also provides a list of approved sources, including Snap-On Industrial, Stanley Proto Industrial, American Kal Enterprises, Inc. (DBA Pro America Premium Tools), and Channellock Inc., with their respective part numbers, CAGE codes, and vendor descriptions. The file includes revision history, with updates from 2015 to 2022, indicating ongoing management and updates for this controlled item. This document serves as a Source Control Drawing, crucial for procurement and ensuring standardized equipment within military applications.

This document is a source control drawing for "PLIERS, LOCKING, LONG NOSE, 6.5 INCH" for the US Army Combat Capabilities Development Command Armaments Center. It details the specifications for the locking pliers, including a nominal size of 6.5 inches, a jaw capacity of 2 inches minimum, and special features such as a wire cutter, turn-screw jaw opening adjustment, serrated gripping surfaces, and a lever-style lock release. The drawing references applicable standards and specifications like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.500 (B107.24), TYPE I, CLASS 3, STYLE B. It also lists an approved source of supply, SNAP-ON INDUSTRIAL, with their part number LP5LN. The document emphasizes that only items described are approved, and substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing has undergone revisions, with the latest ECP K23O3002 approved on 2024-03-18.

This document is a Source Control Drawing for Locking Pliers, Curved Jaw, 10 inch, identified by DWG NO. 0718F0001. It outlines the specifications for these pliers, including a 1-7/8 inch minimum jaw capacity and special features such as a wire cutter, turn-screw jaw opening adjustment, serrated gripping surfaces, and a lever-style lock release. The document references applicable standards like ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.500 (B107.24). It also lists approved sources of supply, with Snap-On Industrial as a current vendor. The drawing was generated from a solid model, is CAD maintained, and changes are to be incorporated by the design activity. This technical drawing is approved for public release, with distribution being unlimited. The document serves as a critical reference for procurement and engineering within the US Army Combat Capabilities Development Command Armaments Center.

This government file details the specifications for “SNAP RING PLIERS, 0 DEGREE, 0.070 TIP,” identified by contract number 0718G0000. It outlines applicable standards, such as ASME Y14.100-2017 and ASME Y14.5-2020, and specifies that only approved items described in the drawing are permitted for use. The document also provides specific features for the pliers, including a 7-inch nominal size, 0.070-inch tip diameter, 0-degree tip, comfort grips, and a ring size capacity of 1/4 to 1-3/8 inches. Approved sources of supply are listed, including Stanley Proto Industrial and Snap-On Industrial, along with their respective part numbers and descriptions. The file also notes revision history for the product baseline.

This government drawing, 0718J0000, details the specifications for "PLIERS, WIRE TWISTER, REVERSIBLE TWIST, 9 INCH." It is a Source Control Drawing, meaning only the described items or approved substitutes can be used. The document lists approved sources, including STRIDE TOOL INC. and SNAP-ON INDUSTRIAL, along with their respective part numbers and descriptions. Key specifications include a nominal length of 9 inches and special features like a reversible twist mechanism, automatic twist-rod return, serrated wire-clamping jaw, and a wire cutter with a cushion grip throat for Foreign Object Debris (FOD) protection. Applicable standards cited are ASME Y14.100-2017, ASME Y14.5-2020, and ASME B107.500 (B107.18). The drawing also includes revision history and approval dates from the US Army Combat Capabilities Development Command Armaments Center. The document emphasizes that identification of approved sources does not guarantee continued availability.

This government file is a source control drawing for a "FILE, HAND, HALF-ROUND, SMOOTH CUT" with part number 0719B1000, developed by the US Army Armament Research, Development and Engineering Center. The drawing specifies the design, dimensions (6 inches nominal length), and applicable standards (ASME Y14.100-2013, ASME Y14.5-2009, CID A-A-2312A Type II). It identifies multiple approved sources of supply, including ICS Cutting Tools, Inc., Warrensville File & Knife Inc., and Bahco North America Inc., along with their respective part numbers, CAGE codes, and descriptions. The document emphasizes that only described items are approved for use, and substitutes require prior approval. This drawing serves as a critical reference for procurement and manufacturing, ensuring compliance and quality for a specific hand tool within government applications.

This government file is a source control drawing for a hand file, specifically a flat, single-cut, smooth-cut mill file. It outlines the specifications for the file, including nominal length (6 inches), width (5/8 inch), and thickness (1/8 inch), as well as the American pattern type and mill style designator. The document lists three approved sources of supply with their respective part numbers, vendor data, and descriptions. It also details applicable standards and specifications (ASME Y14.100-2013 and ASME Y14.5-2009) and emphasizes that only items described are approved for use. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. It is approved for public release with unlimited distribution.

This government file is a Source Control Drawing for a "FILE, HAND, THREE SQUARE, DOUBLE CUT, SECOND CUT" with contract number 0719B6000. It details the specifications for a 6-inch nominal length, American pattern, double-cut, second-cut, three-square hand file, referencing CID A-A-2322, TYPE II. The document lists three approved sources of supply, including their part numbers, vendor data, and CAGE codes. It also includes drawing approvals, revision history, and notes regarding applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009), the restriction of using only approved items, and the non-guarantee of continued availability from approved sources. This drawing serves as a critical document for procurement and ensures that only specified and approved hand files are used in government applications, maintaining quality and compliance.

This government document is a source control drawing for a Swiss Pattern File Set, 5.5 inch, 12-piece, identified by part number 0719G6000. It details the product specifications, including file length, pattern type, cut number, and contents, which comprise 12 different Swiss pattern files and a storage case. The drawing also lists approved sources of supply, including contact information and vendor part numbers for three different companies. Applicable standards and specifications, such as ASME Y14.100-2017 and ASME Y14.5-2020, are referenced. The document emphasizes that only items described are approved for use and that substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability. The drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. This type of document is crucial for federal government procurements, ensuring that specific, approved components are used.

This document is a Source Control Drawing for an adjustable file handle, part number 0719K0000, manufactured by SNAP-ON INDUSTRIAL. The drawing, maintained by the US Army Combat Capabilities Development Command Armaments Center, specifies design and material requirements, including a nominal length of 4-1/8 inches and a minimum handle diameter of 1 inch. Key features include adjustable clamping jaws with a 3/8-inch maximum opening to securely hold files. The document references ASME Y14.100-2017 and ASME Y14.5-2020 as applicable standards. It also notes that only items described are approved for use and that substitute items require prior approval. Distribution is unlimited, as approved for public release. The drawing was generated from a solid model, with changes to be incorporated by the design activity.

This government file details the specifications for a "FILE CARD AND BRUSH, 10"" as a source control drawing. The document outlines the design, materials, and approved sources for this item, which is used by the US Army Armament Research, Development and Engineering Center. Key specifications include a nominal length of 10 inches, specific dimensions for the file card and brush, and a handle made of straight, close-grained beach, birch, or maple wood. Special features include a fine .25-inch trim steel wire file card and a stiff bristle fiber brush. The drawing also lists applicable standards (ASME Y14.100-2013 and ASME Y14.5-2009), emphasizes that only described items are approved for use, and clarifies that identification of approved sources does not guarantee continued availability. Revisions to the product baseline are also noted.

This government file is a source control drawing for a hand-held cold chisel, specifically detailing part number 0720A0001. It outlines the chisel's specifications: a nominal length of 6 inches, a 7/16 inch hex body size, a 1/2 inch blade width, made from heat-treated alloy steel with a black oxide finish, and featuring a flat or convex striking surface. The document lists applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009. It specifies that only described items are approved for use, and substitutes require prior approval. Approved sources of supply are provided, including Mayhew Steel Products, Inc. and Stanley Proto Industrial, along with their part numbers and CAGE codes. Revision history indicates updates from 2016 to 2022. The drawing was generated from a solid model, with the US Army Armament Research, Development and Engineering Center as the design activity. This detailed drawing is crucial for procurement and quality control in federal government applications, ensuring consistency and adherence to military standards.

This government file details the specifications for a "PIN, DRIFT, BRASS, 1/4 INCH," identified by part number 0720B0004. This Source Control Drawing, approved for public release, outlines the design and application of a brass drift pin. Key specifications include a 4-inch nominal length, a 3/8-inch nominal hex body size, and a 1/4-inch tip diameter, with a flat or convex striking surface. The document lists applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. Approved sources of supply are provided, including GRACE USA and MAYHEW STEEL PRODUCTS, INC., along with their respective part numbers, CAGE codes, and addresses. The drawing also notes that only items described are approved for use and that substitutes require prior approval. Revisions to the drawing are documented, with the most recent update in 2024.

This document is a source control drawing (DWG NO. 0720B0005) for a 3/8 inch brass drift pin, outlining its specifications, applicable standards, and approved sources of supply. The drawing details the pin's nominal 6-inch length, 1/2-inch hex body size, and 3/8-inch tip diameter, made from brass with a flat or convex striking surface. It references ASME Y14.100-2017 and ASME Y14.5-2020 as applicable standards. The document identifies two approved vendors: Grace USA and Mayhew Steel Products, Inc., providing their part numbers, CAGE codes, and descriptions. It emphasizes that only items described are approved, and substitutes require prior approval. The drawing, generated from a solid model, is maintained by the US Army Combat Capabilities Development Command Armaments Center. This information is crucial for procurement and quality assurance in federal government contracts.

This government file is a Source Control Drawing (drawing number 0720B0006) for a 1/8 inch drive pin punch, intended for use by the US Army Combat Capabilities Development Command Armaments Center. The document specifies the design, material (alloy steel with black oxide finish), and dimensions of the punch, including a nominal length of 5-1/4 inches, a 1/8 inch hex body size, and a 7/64 inch tip diameter. It also lists applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only items described are approved for use, prohibiting substitutes without prior approval. The drawing includes a distribution statement for public release and identifies approved sources of supply, such as Stanley Proto Industrial and Mayhew Steel Products, Inc., along with their CAGE codes and vendor part numbers. Revisions to the drawing are noted, with the latest dated December 17, 2024.

This document is a Source Control Drawing for a SET, PIN PUNCH, 1/16" TO 1/2", contract number 0720B2000. It outlines the specifications, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and approved sources for the item. The pin punch set includes sizes from 1/16" to 1/2", is made of steel with a black oxide finish, and has a maximum length of 6 inches. It comes with individual punches and a storage case or tool roll. Approved vendors are Mayhew Steel Products, Inc. and Grace USA. The document also includes revision history and states that only items described are approved for use, with no substitutes allowed without prior approval.

This document is a Source Control Drawing (Drawing No. 0720B2001) for a "SET, PIN PUNCH, 1/16" TO 1/4"". It details the specifications for a ball end pin punch set, including sizes (1/16", 3/32", 1/8", 3/16", 1/4", 5/32", 7/32"), a maximum punch length of 6 inches, steel material with a black oxide finish, and special features such as a storage case. The drawing identifies the US Army Combat Capabilities Development Command Armaments Center as the design activity and lists revisions to the product baseline. It also specifies applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and includes notes regarding approved items, substitute items requiring prior approval, and the non-guarantee of continued supply from approved sources. The only approved source listed is STANLEY PROTO INDUSTRIAL, with their CAGE code and part number for a "7 PIECE PIN PUNCH SET".

This document is a source control drawing for a 3/16 inch drift or lining-up punch, detailing its specifications, approved sources, and applicable standards. The punch has a nominal length of 9-1/2 inches, a hex body size of 3/8 to 1/2 inches, and a 3/16 inch tip diameter. It is made of alloy steel with a black oxide finish and features a flat or convex striking surface. Approved sources include Mayhew Steel Products, Inc., and Snap-On Industrial, with specific part numbers and vendor descriptions provided. The drawing references ASME Y14.100-2017 and ASME Y14.5-2020 for applicable standards. It specifies that only items described are approved for use and that substitutes require prior approval. The document also includes revision history and drawing approvals from the US Army Combat Capabilities Development Command Armaments Center.

This government file, identified as a Source Control Drawing 0720C1001, details the specifications for a "PUNCH, STARTING, 1/16"". The document outlines critical engineering and design parameters, including applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), material (alloy steel), finish (black oxide), and dimensions such as a 5-inch nominal length, 5/16-inch nominal hex body size, and a 1/16-inch tip diameter. It also specifies a flat or convex striking surface. The drawing was created by the US Army Combat Capabilities Development Command Armaments Center and includes revision history. Crucially, it lists approved sources of supply, including Mayhew Steel Products, Inc. (CAGE Code 39068) and Stanley Proto Industrial (CAGE Code 1CV05), along with their respective part numbers and descriptions. The document emphasizes that only items described are approved for use, and substitutes require prior approval. This file is essential for procurement and manufacturing within government contracts, ensuring adherence to precise specifications and approved vendors for this specific tool.

The document details a Source Control Drawing for a 1/8" starting punch, identified as contract number 0720C1002, originating from the US Army Combat Capabilities Development Command Armaments Center. It outlines the specifications for the punch, including a 5-inch nominal length, 5/16-inch hex body size, 1/8-inch tip diameter, alloy steel material, and a black oxide finish with a flat or convex striking surface. The drawing references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. It also lists approved sources of supply, including Mayhew Steel Products, Inc., Snap-On Industrial, and Stanley Proto Industrial, along with their respective part numbers and CAGE codes. The document emphasizes that only items described are approved for use and that substitute items require prior approval. It also clarifies that the identification of approved sources does not guarantee continued availability.

This government file, identified as Source Control Drawing 0720C1003, details the specifications and approved sources for a "PUNCH, STARTING, 3/32"". The document outlines the physical characteristics of the punch, including a 5-inch nominal length, a 5/16-inch hex body size, and a 3/32-inch tip diameter. It specifies the material as alloy steel with a black oxide finish and requires a flat or convex striking surface. The drawing references applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. Importantly, it emphasizes that only items described are approved for use, prohibiting substitutes without prior approval. The file also lists approved sources of supply, including Mayhew Steel Products, Inc., Snap-On Industrial, and Stanley Proto Industrial, providing their CAGE codes, part numbers, and descriptions. This document ensures standardization and quality control for this specific tool within government applications.

This government file details the specifications for a "PUNCH, CENTER, 5 INCH" under contract number 0720D0000. It includes engineering drawings, applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and notes regarding approved items and sources of supply. Key specifications define the punch's length (5 inches nominal), hex body size (5/16 - 3/8 inches), tip angle (60 to 90 degrees), steel alloy material, black oxide finish, and special features like a flat or convex striking surface. The document lists approved sources, including Snap-On Industrial, Mayhew Steel Products, Inc., and Stanley Proto Industrial, along with their part numbers and vendor descriptions. Revisions to the document are also noted.

This government file details the specifications for a "PUNCH, CENTER, SOLID 5 INCH," identified by drawing number 0720D0002. It serves as a source control drawing, indicating that only the described items are approved for specified applications, and substitutes require prior approval. The document outlines key specifications, including a 5-inch nominal length, a 5/16 - 3/8 inch hex body size, a 60 to 90-degree tip angle, steel alloy material, black oxide finish, and a flat or convex striking surface. Approved sources of supply are listed with their respective part numbers, vendor data, names, addresses, and CAGE codes. The file also references applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. This drawing was generated from a solid model and is CAD maintained, with changes to be incorporated by the design activity. It is approved for public release with unlimited distribution.

This government document is a Source Control Drawing (No. 0720F0001) for a brass drift punch, .5 x 7.5 inch, approved for public release. It details applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), and specifies that only items described are approved, with no substitutes without prior approval. The drawing lists approved sources, including Snap-On Industrial, Stanley Black & Decker, Inc. DBA Mac Tools, Mayhew Steel Products Inc, and Stanley Proto Industrial, along with their part numbers, CAGE codes, and descriptions. Key specifications for the punch include a nominal length of 7.5 inches, a point diameter of .50 inches, brass material, and special features such as a knurled body and a flat or convex striking surface. The document also includes revision history and drawing approvals by various engineers and quality personnel.

This document is a Source Control Drawing (SCD) for a .75 x 8 inch brass drift punch, detailing its specifications and approved manufacturers. It outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020) and emphasizes that only specified items are approved for use. The drawing provides a description of the drift punch, including its nominal length of 8 inches, point diameter of .75 inches, brass material, and special features like a knurled body and flat or convex striking surface. It lists several approved sources, including Snap-On Industrial and Stanley Black & Decker, Inc. DBA Mac Tools, along with their part numbers, CAGE codes, and vendor descriptions. The document also includes revision history and drawing approvals, indicating its use by the US Army Combat Capabilities Development Command Armaments Center. This SCD serves to control the procurement and use of this specific tool, ensuring quality and compatibility within government applications.

This document is a Source Control Drawing for a "Pry Bar, Rolling Head, 16 Inch" produced by the US Army Combat Capabilities Development Command Armaments Center. It details the specifications, dimensions, and approved sources for this specific tool, identified by part number 0720H0000. Key features include a 9/16 inch nominal diameter, 16-inch nominal length, chisel point, aligning point, and a rounded rolling head with a black oxide finish. The drawing lists applicable standards like ASME Y14.100-2017 and ASME Y14.5-2020. It also specifies that only items described are approved for use, and substitutes require prior approval. Approved sources include Mayhew Steel Products, Inc. and Snap-On Industrial, with their respective part numbers and CAGE codes. Revisions to the drawing are documented, indicating changes and product baselines. This document ensures standardization and control over the procurement and use of this specific pry bar within government applications.

This government file is a Source Control Drawing for a 16 oz. ball-peen hammer, part number 0721B0000. The document details specifications such as a length of 13-16 inches, a 16 oz. head weight, and special features including a fiberglass handle with cushioned grip and a hammer head with one ball-peen face and one convex striking face. It lists Snap-On Industrial as an approved source of supply with their part number BPN16B. The drawing also includes applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and notes regarding the approval of items, the use of substitute items, and the guarantee of supply. This document is crucial for procurement and quality control within government applications, ensuring that only approved and compliant tools are utilized.

This government file details the specifications for a "HAMMER, HAND, DEAD BLOW" under contract number 0721B0001, issued by the US Army Combat Capabilities Development Command Armaments Center. The document specifies design approvals, applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), and notes regarding approved items and sources of supply. Key specifications for the dead blow hammer include a 9-inch nominal handle length, 9-ounce nominal weight, steel material, and a urethane coating. The file lists approved sources, including TRUSTY-COOK CORP and SNAP-ON INDUSTRIAL, along with their respective part numbers and descriptions. It also includes revision history, indicating product baseline and subsequent updates.

This government file, a Source Control Drawing (SCD), details the specifications for a "HAMMER, HAND, DEAD BLOW" for the US Army Combat Capabilities Development Command Armaments Center. The document outlines applicable standards (ASME Y14.100-2017, ASME Y14.5-2020), and emphasizes that only items described are approved, with no substitutions without prior approval. Key specifications include a nominal 12-inch handle length, 21-ounce nominal weight, steel material, and a urethane coating. The drawing lists approved sources, including SNAP-ON INDUSTRIAL and TRUSTY-COOK CORP, with their respective part numbers and descriptions. Revisions to the product baseline are also noted. This SCD ensures that only specific, approved tools are used, maintaining quality and compatibility for military applications, typical for federal RFPs involving specialized equipment.

This government file details a Source Control Drawing for a 4-ounce hand hammer, specifically identified as part number 0721J0000. The document, originating from the US Army Armament Research, Development and Engineering Center, specifies the hammer's design, materials (brass or copper head, wood handle), and dimensions (8-inch nominal handle length). It outlines applicable standards (ASME Y14.100-2013, ASME Y14.5-2009) and emphasizes that only items described are approved, with no substitutes allowed without prior approval. The drawing also identifies Grace Metal Products as an approved source of supply, including their address, CAGE code (3F492), and vendor part number (CH-4) for a 4-ounce copper hammer. This document is approved for public release, indicating its role in federal procurement and supply chain management for military equipment.

The document is a source control drawing for a Flexible Extension Magnetic Mount Flashlight, identified by part numbers 0725C0000-1 and 0725C0000-2. It details specifications for the flashlight, including a 15-inch flexible extension cable, 21-inch overall length, aluminum case, 65 lumens minimum LED bulb, and a power requirement of AA batteries providing no less than 7 hours of burntime. Special features include water resistance, a rare earth magnetic clip, and an on-off switch. The document lists approved sources of supply: Pelican Products, Inc. (CAGE Code 65442) and Snap-On Industrial (CAGE Code 55719). It also outlines applicable standards such as ASME Y14.100-2017 and ASME Y14.5-2020. This drawing is crucial for government procurement, ensuring that only approved items are used and providing a clear reference for contractors and suppliers.

The document is a Source Control Drawing for a 32-blade Thickness Gauge (Part No. 0728E0000). This drawing outlines the specifications, approved sources, and relevant standards for the gauge, which is used by the US Army Combat Capabilities Development Command Armaments Center. Key specifications include a nominal blade length of 3 inches, a nominal blade width of 0.5 inches, and a minimum of 32 blades. The material composition specifies a minimum of 31 steel blades and 1 brass blade, with detailed thicknesses provided for each material. Approved sources include A and E Mfg Co. The document emphasizes adherence to ASME Y14.100-2017 and ASME Y14.5-2020 standards and notes that only items described are approved for use, requiring prior approval for substitutes. This drawing serves as a critical reference for procurement and manufacturing, ensuring that the thickness gauge meets specific military requirements.

This government file, identified as Source Control Drawing 0728J0000, details the specifications and approved sources for a 6-inch machinists' rule. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020), emphasizing that only items described are approved for use and substitutes require prior approval. It provides detailed specifications for the rule, including a 6-inch length, 1/2-inch nominal width, flexible steel material, and graduations in 10ths, 32nds, 64ths, and 100ths. Approved sources of supply are listed with part numbers, vendor data, CAGE codes, and vendor descriptions. The drawing also includes revision history, with updates in 2015, 2017, and 2024. This document serves as a critical reference for procurement and quality assurance of this specific tool within government applications.

This government file is a source control drawing for a 12-foot tape measure, detailing its specifications, materials, and approved sources. The document outlines requirements such as a steel blade, ABS plastic case, and English and metric graduations, along with special features like a self-retracting blade and a push-button lock. It lists the U.S. Tape Company, Inc. as an approved vendor. The drawing emphasizes adherence to ASME standards and notes that only items described are approved for use. This file is crucial for procurement and quality control within federal government applications, ensuring that only specified and approved tape measures are utilized, aligning with the stringent requirements often found in federal RFPs.

This government file details a Source Control Drawing for an Oval Sash Brush, #10, identified by contract number 0733A0000. It specifies the brush's dimensions (11.25 inches nominal length, 2.75 inches nominal brush length, 1.125 inches nominal brush width), materials (wood handle, polyester bristles), and application for multiple uses. The drawing was approved by the US Army Combat Capabilities Development Command Armaments Center. Applicable standards include ASME Y14.100-2017 and ASME Y14.5-2020. The document lists an approved source of supply: Jason Incorporated DBA Osborn International, with part number 0733A0000-1. It emphasizes that only items described are approved, and substitutes require prior approval. This drawing ensures quality and standardization for a specific tool within government applications.

This government file details the specifications for an inspection mirror, identified as part number 0733B0000, under a Source Control Drawing. The document outlines applicable standards (ASME Y14.100-2017 and ASME Y14.5-2020) and emphasizes that only described items are approved for use, requiring prior approval for any substitutes. It also states that the identification of approved sources does not guarantee continued availability. The mirror is a telescoping, hinged, stainless steel inspection mirror with a nominal size of 2 x 3-1/2 inches, a telescoping length of 7 to 28-1/2 inches, and a mirror that rotates 180 degrees. Approved sources include Industrial Magnetics Inc., Mayhew Steel Products Inc., and Snap-On Industrial. The drawing was generated from a solid model and is CAD maintained by the US Army Combat Capabilities Development Command Armaments Center. Revisions to the drawing are also noted.

The document details the specifications and approved sources for a multi-tool, identified by contract number DAI 0733C0000 and drawing number 0733C0000. This source control drawing, approved for public release, outlines a multi-tool with an overall length of 6.61 inches nominal, a closed length of 4.92 inches nominal, and a maximum weight of 9 oz. It is constructed from stainless steel with a ballistic nylon sheath. Key features include needle-nose pliers, wire cutters with replaceable inserts, straight and serrated blade knives, Phillips-tip and various flat-tip screwdrivers, and a sheath. The approved source is Fiskars Brands, Inc., with part number 07530G, described as a "Multi-Plier 600 - Needlenose Stainless w/Carbide Insert Cutters, Sheath." The document specifies applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009, and states that only items described are approved for use, prohibiting substitutes without prior approval. It also clarifies that listed sources do not guarantee continued availability. This document is crucial for procurement and ensures adherence to design and material specifications for this government-approved multi-tool.

This government document is a Source Control Drawing for a 1.5-inch blade putty knife, identified by part number 0733E0000. It details the product's specifications, including a stainless steel blade and a two-material or texture single-piece-design handle. The drawing specifies applicable standards such as ASME Y14.100-2013 and ASME Y14.5-2009. It also lists an approved source, Warner Manufacturing Co Inc., along with their CAGE Code, vendor part number, and description for a 1-1/2" stiff putty knife with a hammer cap. The document emphasizes that only items described are approved for use, and substitutes require prior approval. It also clarifies that the identification of approved sources does not guarantee their continued availability. This drawing, generated and maintained via CAD, is approved for public release and distribution is unlimited.

This government file is a Source Control Drawing for a "RETRIEVING TOOL, MAGNETIC, TELESCOPING" with contract number DAI and drawing number 0733F0000. It details the specifications for a magnetic retrieving tool, including its telescoping length (16-3/4 to 26-1/2 inches), minimum lift capacity (1-1/2 lbs), and special features like a flexible head and vinyl or cushion grip. The document lists approved sources of supply, including Snap-On Industrial, Stanley Proto Industrial, and Ullman Devices Corporation, along with their part numbers and descriptions. It also outlines applicable standards/specifications (ASME Y14.100-2017, ASME Y14.5-2020) and notes regarding approved items, substitute items, and the guarantee of supply. The drawing was created by the US Army Combat Capabilities Development Command Armaments Center in Rock Island, Illinois, and includes revision history.

This government file is a Source Control Drawing for "Tweezers, Craftsman, 4.5"" (Drawing Number 0733L0000), approved for public release. It outlines the specifications for the tweezers, including a length of 4.5 inches nominal, a jaw opening of 5/16 inch minimum, a chromium finish, and special features such as smooth jaws and a slim tip. The document identifies the US Army Armament Research, Development and Engineering Center as the design activity. It lists Swanstrom Corp as an approved source of supply for the item (Part No. 0733L0000-1). The drawing also references applicable standards/specifications like ASME Y14.100-2013 and ASME Y14.5-2009. Key notes emphasize that only items described are approved for use, and substitutes require prior approval. The document clarifies that identifying an approved source does not guarantee continued availability. Revisions to the drawing are detailed, with the latest dated 2019-03-14.

This government file is a Source Control Drawing for a "MAGNIFYING GLASS, MONOCULAR," identified by part number 0733L0001 and CAGE Code 59678, for use by the US Army Armament Research, Development and Engineering Center. The drawing specifies a "MONOCULAR MAGNIFYING GLASS" with a minimum 12X combined magnification level and special features including three pivoted lenses and a case. It lists Bausch and Lomb (CAGE Code 6J776) as an approved source, providing their part number (812367) and description ("FOLDING POCKET MAGNIFIER, 5X - 20X"). The document includes engineering approvals, revision history, and notes regarding applicable standards (ASME Y14.100-2013, ASME Y14.5-2009), the restriction of substitute items without prior approval, and that the listing of approved sources does not guarantee continued availability. The drawing is approved for public release with unlimited distribution.

This document is a Source Control Drawing for a Mechanical Bench Block, part number 0739F0000. It outlines the specifications for a 3-inch diameter, 1.5-inch width block with oversized holes (1/8 to 5/8 inch diameter) and one V-groove. The drawing identifies the US Army Combat Capabilities Development Command Armaments Center as the design activity. Applicable standards include ASME Y14.100-2017 and ASME Y14.5-2020. The approved source of supply is The L.S. Starrett Company, DBA Coordinate Measuring Machine Division Tool Division. The document emphasizes that only items described are approved for use and substitutes require prior approval. It also clarifies that identification of a source does not guarantee continued availability. The drawing includes revision history, with the latest revision from 2024-12-17.

The document is a Source Control Drawing for "SAFETY GLASSES, CLEAR, OVER-THE-GLASSES," with a contract number DAI 0742A0000. It details the specifications, design approvals, and approved sources for these safety glasses, which are intended for use by the US Army Armament Research, Development and Engineering Center. Key specifications include a clear polycarbonate lens with a minimum thickness of 2mm, impact, scratch, and chemical resistance, and the ability to fit over prescription glasses, complying with ANSI Z87 standards. The drawing lists Honeywell Safety Products as an approved source, providing their address, CAGE code, and part number (S2500 UVEX ASTRO OTG 3001) for the item. The document also outlines applicable standards like ASME Y14.100-2013 and ASME Y14.5-2009, and emphasizes that only described items are approved for use. This document is crucial for procurement and quality control within government contracts, ensuring adherence to strict safety and material standards for military equipment.

The document is a Technical Data Package List (TDPL) for the ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND at Picatinny Arsenal, New Jersey, dated 02/26/2025, with Document Number D 0631A0000:59678 and National Stock No. 5180-01-670-9469. The TDPL, identified as SARTK (Small Arms Repairman Tool Kit), outlines the technical data required for the manufacture and acceptance inspection of the material. It details various sections including product drawings (0001-0014), inspection drawings (0015), specifications and standards (0016), and TDPL note legend (0017). Packaging drawings, hazardous component safety data statements, and outstanding approved engineering changes are not applicable. The document specifies that manufacture and inspection must comply with all listed technical data, drawings, and specifications. It also clarifies that unlisted specifications referred to in listed documents still apply, with their revisions determined by the latest DOD Index of Specifications and Standards. All references to former arsenals are updated to Commander, DEVCOM Armaments Center, Picatinny, NJ. The package is non-classified and approved for public release with unlimited distribution. A 3D model is available for reference. The latter part of the document provides an extensive list of individual components and tools included in the SARTK, such as various types of sockets, screwdrivers, wrenches, hex keys, and pliers, with their respective document numbers, revision symbols, and dates.

The document is a Technical Data Package List (TDPL) for the ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND at Picatinny Arsenal, New Jersey, dated 02/26/2025, with Document Number D 0631A0000:59678 and National Stock No. 5180-01-670-9469. The TDPL, identified as SARTK (Small Arms Repairman Tool Kit), outlines the technical data required for the manufacture and acceptance inspection of the material. It details various sections including product drawings (0001-0014), inspection drawings (0015), specifications and standards (0016), and TDPL note legend (0017). Packaging drawings, hazardous component safety data statements, and outstanding approved engineering changes are not applicable. The document specifies that manufacture and inspection must comply with all listed technical data, drawings, and specifications. It also clarifies that unlisted specifications referred to in listed documents still apply, with their revisions determined by the latest DOD Index of Specifications and Standards. All references to former arsenals are updated to Commander, DEVCOM Armaments Center, Picatinny, NJ. The package is non-classified and approved for public release with unlimited distribution. A 3D model is available for reference. The latter part of the document provides an extensive list of individual components and tools included in the SARTK, such as various types of sockets, screwdrivers, wrenches, hex keys, and pliers, with their respective document numbers, revision symbols, and dates.

This government file, identified as PRON EH4L0188EH, is a Technical Data Package List (TDPL) from CAGE 59678, detailing various documents related to military equipment and maintenance. The documents are primarily "DR" (Drawing) type files in PDF format, all marked with a "N" security level, indicating they are unclassified. Key items include a "SMALL ARMS REPAIRMAN" document, "IDENTIFICATION PLATE," "WARNING MARKING," "INVENTORY AND WARRAN" (likely warranty), "DRAWER LABELS," "PADLOCK," "TOOL CHEST," "FOAM ORGANIZING LINE," and a "COMPONENTS LIST, SAR." Additionally, there are numerous documents for "JEWELERS SCREWDRIVER," various "SCREWDRIVER SET" configurations, and multiple "SOCKET SET" assemblies, including 1/4", 3/8", and 1/2" drive sizes, and hex configurations. This TDPL provides a comprehensive overview of documentation pertinent to small arms repair and associated tools and equipment.

This government file, identified as PRON EH4L0188EH, is a Technical Data Package List (TDPL) from CAGE 59678, detailing various documents related to military equipment and maintenance. The documents are primarily "DR" (Drawing) type files in PDF format, all marked with a "N" security level, indicating they are unclassified. Key items include a "SMALL ARMS REPAIRMAN" document, "IDENTIFICATION PLATE," "WARNING MARKING," "INVENTORY AND WARRAN" (likely warranty), "DRAWER LABELS," "PADLOCK," "TOOL CHEST," "FOAM ORGANIZING LINE," and a "COMPONENTS LIST, SAR." Additionally, there are numerous documents for "JEWELERS SCREWDRIVER," various "SCREWDRIVER SET" configurations, and multiple "SOCKET SET" assemblies, including 1/4", 3/8", and 1/2" drive sizes, and hex configurations. This TDPL provides a comprehensive overview of documentation pertinent to small arms repair and associated tools and equipment.

This instruction document outlines how to navigate and interpret a Technical Data Package (TDP) presented as a 3Di PDF, a format derived directly from 3D CAD models. It functions as a viewable, similar to traditional drawings, but includes an interactive, maneuverable 3D model. The document details how to open a 3Di PDF, adjust settings for 3D content, and understand its layout for both part and assembly models. Key features include model space manipulation, combined views for organizing technical information, annotation highlighting, and a Bill of Material (BOM) pane for assemblies. It also covers additional tools like the built-in 3D toolbar for viewing, commenting, measuring, and cross-sectioning, as well as printing options for selected views or the current display. This guide ensures users can fully utilize the interactive capabilities of 3Di PDFs for technical analysis.

The provided file contains only three numerical values: 280, 20250227191009, and 0. Without additional context or descriptive text, it is impossible to determine the main topic, key ideas, or purpose of this document within the scope of government RFPs, federal grants, or state/local RFPs. The file lacks the necessary information to create a meaningful summary or analysis.

The provided text,

This government file outlines the Quality Assurance Provisions (QAP) for Socket Set Assemblies, issued by the COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER. It details inspection requirements, applicable documents, and procedures to ensure product quality. Key provisions include the supplier's responsibility for inspection, a mandatory first article inspection of one sample per item, and quality conformance inspections covering all characteristics in Parts III and IV of the document. The QAP specifies the "Socket Rail Drop" test (STM-1) as a critical inspection method, involving visual examination, physical removal and replacement of sockets, and a drop test from 30 inches onto concrete, with specific failure criteria. The document emphasizes adherence to engineering drawing practices and dimensioning standards (ASME Y14.100-2017 and ASME Y14.5).

The document outlines the Quality Assurance Provisions (QAP) for the Small Arms Repairman Tool Kit (SARTK), contract C0631A0000. It specifies inspection requirements, applicable documents like ASME standards, and detailed test methods. Key provisions include the supplier's responsibility for all inspections, mandatory first article inspection using the exact production methods, and comprehensive quality conformance inspections covering various characteristics. Part III lists inspection requirements such as Tool Chest Interface, Packing Instructions, and Markings, while Part IV details certification requirements for Adhesion and Chemical Resistance. Part V provides extensive test methods and procedures (STMs) for each characteristic, ensuring the SARTK meets stringent quality standards for functionality, durability, and compliance. This QAP ensures the SARTK's reliability and adherence to specified design and performance criteria.

The Army Contracting Command – Detroit Arsenal (ACC-DTA) has issued a Sources Sought Notice/Market Research Survey to gather information from businesses, both small and large, for the potential future production of Small Arms Tool Kits (SARTK) (NSN 5180-01-670-9469, Part No. 0631A0000/59678). The estimated quantities over five years are 2269 in Year 1, followed by 500 units for Years 2-5. This is for planning purposes only and does not guarantee a solicitation or contract award. Responses are due by December 23, 2025, 11 AM EST, and should be emailed to Lyndsey Pena. The notice provides instructions for marking proprietary information and includes a questionnaire covering vendor profiles (company name, address, CAGE code, POC, email, website, business type, and non-manufacturer rule status) and requirement-specific information (past manufacturing experience, current capability, experience with product verification testing, production rates, price breaks, drawing review, and any other pertinent information).