Windtunnel Piping Installation
ID: W15QKN-25-X-13I9Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW4MK CCDC ARMAMENTS CENTERPICATINNY ARSENAL, NJ, 07806-5000, USA

NAICS

Plumbing, Heating, and Air-Conditioning Contractors (23822)

PSC

MAINT/REPAIR/REBUILD OF EQUIPMENT- PLUMBING, HEATING, AND WASTE DISPOSAL EQUIPMENT (J045)
Timeline
    Description

    The Department of Defense, specifically the Army Combat Capabilities Development Command (DEVCOM), is seeking information from qualified contractors for a project titled "Windtunnel Piping Installation." This Sources Sought notice aims to gather capability statements from firms experienced in installing high-powered industrial air and pipe systems, which are critical for upgrading a hypersonic wind tunnel. The project involves extensive piping requirements, including the installation of air compressors, coolers, wet tanks, and desiccant dryers, all of which must be properly mounted, supported, and sealed to ensure safe operation. Interested contractors should submit their capability statements, including company name, Cage Code, website, contact information, and business size status, to Mark Zator at mark.zator.civ@army.mil or by phone at 973-724-8121.

    Point(s) of Contact
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Sources Sought
    Similar Opportunities
    Industrial High Temperature Heater System
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army's Combat Capabilities Development Command - Armaments Center (DEVCOM-AC), is seeking to procure an Industrial High Temperature Heater System to upgrade the supersonic wind tunnel located in Building 266 at Picatinny Arsenal, NJ. The primary objective of this procurement is to acquire the heater element and ancillary equipment necessary for transitioning the wind tunnel's capabilities from supersonic to hypersonic, focusing solely on the hardware required for this upgrade. This equipment is critical for simulating the actions of objects in flight, which is essential for various defense applications. Interested small businesses are encouraged to reach out to Gloria Thoguluva at gloria.thoguluva.civ@army.mil or by phone at 520-669-8575 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    TINKER AFB MAC BOA WWYK200323 REPAIR HVAC DIFFUSER AND DUCTWORK B3001
    Active
    Dept Of Defense
    The Department of Defense, specifically the Air Force Materiel Command, is soliciting proposals from qualified contractors for the repair of HVAC diffusers and ductwork at Building 3001, Tinker Air Force Base, Oklahoma, under project number WWYK200323. The project entails the demolition of corroded ductwork, replacement of diffusers, and redesign of the existing duct system to enhance energy efficiency and indoor air quality, adhering to various safety and building codes. This initiative is crucial for maintaining operational excellence and safety in military facilities, ensuring that HVAC systems function effectively while minimizing environmental impact. Interested contractors must have attended a mandatory site visit and can direct inquiries to Richard Brush or Tamra Torres via email, with proposals due by the specified deadline.
    HVAC Tunnel Cooling System Rehabilitation, Table Rock Powerhouse
    Active
    Dept Of Defense
    The Department of Defense, through the U.S. Army Corps of Engineers, is soliciting bids for the HVAC Tunnel Cooling System Rehabilitation project at the Table Rock Powerhouse in Taney County, Missouri. This project aims to enhance the cooling system's efficiency and reliability, with a construction magnitude estimated between $1,000,000 and $5,000,000. The selected contractor will be responsible for installation and upgrades in accordance with industry standards, specifically under NAICS Code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. Interested small businesses must submit inquiries via the ProjNet system by December 20, 2024, and attend a site visit scheduled for December 17, 2024, with the bid opening taking place virtually on January 10, 2025. For further details, bidders can contact Shelby Henson at Shelby.m.henson@usace.army.mil or Sarah Hagood at sarah.n.hagood@usace.army.mil.
    Coaxial Thermocouple Requirement
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking vendors capable of supplying coaxial thermocouples for the AEDC Tunnel 9, as outlined in a Sources Sought notice. The procurement aims to gather information on vendors who can meet specific requirements regarding dimensions, installation methods, and operational characteristics of these sensors, which are critical for hypervelocity testing environments. This opportunity may lead to a potential five-year indefinite delivery/indefinite quantity contract, contingent on vendor capabilities and compliance with the outlined specifications. Interested vendors must submit their capabilities statements, including compliance details, past applications, available contract vehicles, and estimated pricing by January 17, 2025, to Robert Mosley at robert.mosley.3@us.af.mil or Noah Bean at noah.bean.1@us.af.mil.
    Generator Cooling Water Piping Replacement Kit
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army through the W076 Endist Tulsa office, is soliciting bids for a Generator Cooling Water Piping Replacement Kit. The procurement involves supplying and delivering a specific craft labor kit, identified as Victaulic Craft Labor Part24U-6683C, which is essential for maintaining operational efficiency in generator systems. This opportunity is set aside for small businesses under the SBA guidelines, emphasizing the importance of supporting small enterprises in government contracting. Interested vendors can reach out to C Thayer at colleen.thayer@usace.army.mil or by phone at 918-669-7657 for further details regarding the solicitation process.
    F100-PW-220 Sprayring Manifold Assemblies
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the procurement of F100-PW-220 Sprayring Manifold Assemblies, with a focus on repair and overhaul services. This sole source requirement is directed towards Woodward FST, Inc., which is uniquely qualified due to its licensing and prior experience with these components, critical for atomizing fuel in military aircraft engines. The estimated quantity for this procurement is 376 units, with delivery expected to commence within 90 days after order receipt, at a rate of 20 units per month. Interested contractors must submit their proposals by January 7, 2025, and can direct inquiries to Contracting Officer William Heckenkemper at william.heckenkemper@us.af.mil or Contracting Specialist Savannah Mincey at savannah.mincey@us.af.mil.
    Helium Recovery and Liquid Helium
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking sources for a Helium Recovery and Liquid Helium Generation System at Arnold Air Force Base in Tennessee. This Sources Sought Notice aims to assess the capabilities of both small and large businesses to fulfill the government's requirements, which may lead to a firm-fixed-price contract. The helium recovery and generation system is critical for various defense applications, emphasizing the strategic importance of helium in military operations. Interested vendors must submit their responses, including company information and a proposed cost estimate, by January 10, 2025, and can contact Andrew Waggoner or Erica Anglin for further inquiries.
    B1130 HVAC Study Commissioning
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the retro-commissioning of the HVAC system in Building 1130 at Shaw Air Force Base, South Carolina. The project aims to optimize the HVAC system's performance by assessing cooling and airflow needs for the first and second floors, requiring the contractor to provide all necessary management, tools, labor, and compliance with various federal and state regulations. This procurement is part of the government's initiative to promote opportunities for Women-Owned Small Businesses (WOSB), with a total award amount of $25,500,000. Interested contractors must submit their proposals by January 22, 2025, and can direct inquiries to Kishauna Goodman at kishauna.goodman@us.af.mil or Shaunannette Watson at shaunannette.watson@us.af.mil.
    Offutt AFB HVAC Control System Upgrade
    Active
    Dept Of Defense
    The Department of Defense, through the 55th Contracting Squadron at Offutt Air Force Base, Nebraska, is seeking potential sources for the upgrade of HVAC control systems, specifically the replacement of outdated Excel 5000 series controllers. The project involves replacing these controllers with compatible Honeywell Tridium N4 products, updating the control system's programming and database, and ensuring compliance with cybersecurity standards while minimizing disruption to facility operations. This upgrade is critical for maintaining the functionality of HVAC systems that support mission-critical operations, as failures can lead to delays and emergency repairs. Interested parties are encouraged to submit their capabilities by 1:00 PM (CST) on November 14, 2024, to the primary contacts, Jose Buenaventura and Austin D. Palrang, via their provided email addresses. Note that this is a sources sought notice for planning purposes only, and no funds are currently available for this effort.
    HVOF Spray Cell Model Number SE10473B from Oerlikon Metco
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting a Sources Sought notice for the procurement of an HVOF Spray Cell model number SE10473B from Oerlikon Metco, intended for installation at Tinker Air Force Base in Oklahoma. This procurement involves the removal of an existing spray booth and the installation of a new unit that includes advanced features such as a Fanuc 6-axis robot, an integrated turntable, and extensive safety systems compliant with OSHA standards. The initiative is crucial for upgrading operational capabilities and ensuring adherence to federal and military safety and environmental standards. Interested parties are encouraged to express their interest and capabilities by responding to this notice by January 8, 2025; however, this is not a request for proposals, and the government is under no obligation to award a contract based on the responses received. For further inquiries, interested vendors may contact Patrick Hansen at patrick.hansen@dla.mil or by phone at 804-489-8759.