Propulsor Demonstration Hardware Follow-on
ID: N00167-24-R-0049Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNSWC CARDEROCKBETHESDA, MD, 20817-5700, USA

NAICS

Ship Building and Repairing (336611)

PSC

NATIONAL DEFENSE R&D SERVICES; DEFENSE-RELATED ACTIVITIES; APPLIED RESEARCH (AC32)

Original Source

https://sam.gov/opp/ca2b6e5011e24f45b83e49c572e302d5/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NSWC Carderock, is seeking contractors for the Propulsor Demonstration Hardware Follow-on project. The objective of this procurement is to acquire manufacturing design drawings, engineering, fabrication, inspection, and assembly of prototype propulsor, shafting, and bearing components, along with the necessary equipment to support research and development, testing, and evaluation for Department 80. This contract is crucial for the production of both scaled and full-scale hardware, including components suitable for at-sea demonstrations, and may also facilitate vendor qualification of fleet hardware. Interested parties can reach out to Abeer Ameer at abeer.j.ameer.civ@us.navy.mil or call 301-275-4537 for further details, noting that the solicitation will be released on a full and open competition basis.

    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Propulsor Demonstration Hardware Follow-on
    Currently viewing
    Special Notice
    Similar Opportunities
    Block F Basic Ordering Agreement
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center Carderock Division (NSWCCD), intends to establish a Basic Ordering Agreement (BOA) with Rolls Royce Marine North America (RRMNA) to support the Propulsor Program for VIRGINIA Class submarines. This agreement will facilitate the inspection, repair, and alteration of Government-Furnished Property, including propulsor hardware and associated support equipment, in anticipation of production contracts for Block E and Block F scheduled for fiscal year 2026. The decision to pursue this sole-source contract is based on RRMNA's unique capabilities and established expertise, which are critical to meeting urgent production needs and avoiding significant delays and costs associated with seeking alternative suppliers. Interested parties can reach out to Abeer Ameer at abeer.j.ameer.civ@us.navy.mil or Sam Keith at sam.a.keith.civ@us.navy.mil for further information.
    Hull Assembly with Brackets for the Fleet Exercise Section (FES)
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Sea Logistics Center, is soliciting proposals for the production of Hull Assembly with Brackets for the Fleet Exercise Section (FES) in support of the MK48 Heavyweight Torpedo System. The procurement includes one firm fixed price contract for one first article test unit and an initial quantity of 58 production units, with an option for an additional 220 units over four years. This equipment is critical for the operational readiness of the Navy's torpedo systems, and contractors must meet specific security and compliance requirements to access necessary technical data. Interested parties should contact Cody Hutchinson at cody.d.hutchinson.civ@us.navy.mil or call 717-605-1567 for further details and must submit proposals through the PIEE Solicitation Module by the specified deadline.
    30--SHAFT,STRAIGHT
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Navy's NAVSUP Weapon Systems Support, is soliciting proposals for the manufacture of spare parts, specifically a straight shaft, under a federal contract opportunity. The procurement requires compliance with stringent quality assurance standards due to the critical nature of the items, which are essential for shipboard systems involved in aircraft launch and recovery operations. Interested vendors must submit firm fixed-price quotes, evaluated based on lead time, price, past performance, and capacity, with proposals due by 2:00 PM EST on the specified closing date. For further inquiries, potential offerors can contact Alexis Healy at 215-697-1143 or via email at ALEXIS.HEALY@NAVY.MIL.
    Solicitation N6449825R0002
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center Philadelphia Division, is seeking proposals for an Indefinite-Delivery, Indefinite-Quantity (IDIQ), Firm-Fixed-Price (FFP) contract focused on the manufacturing and testing of essential equipment for VIRGINIA Class submarines. The procurement includes Sail Racetracks, Payload Tube Loading Platforms, and various support equipment, along with associated shipping crates, emphasizing the importance of quality assurance and compliance with military specifications. This contract aims to enhance maintenance support for submarines, reflecting the Navy's commitment to operational readiness and engineering capabilities. Interested contractors should submit their technical and cost proposals by the specified deadlines, with a total contract value estimated at $50 million, including a minimum participation requirement of 40% for small businesses, translating to $20 million. For further inquiries, contact Kaitlyn Sawicki at kaitlyn.r.sawicki.civ@us.navy.mil.
    53--KEY COUPLING SHAFT
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of a Key Coupling Shaft, classified under NAICS code 332510 for Hardware Manufacturing. This procurement is critical as the material will be utilized in a vital shipboard system, where the use of incorrect or defective components could lead to severe consequences, including personnel injury or loss of the ship. Interested vendors should note that this opportunity is set aside for small businesses, and they must adhere to strict quality assurance and compliance requirements, including ISO certifications and traceability protocols. For further inquiries, potential bidders can contact Tiana Hammaker at 717-605-8399 or via email at TIANA.HAMMAKER@NAVY.MIL, with proposals due by the specified deadline.
    30--SHAFT,INTERLOCK
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of interlock shafts, identified as "30--SHAFT, INTERLOCK," through NAVSUP Weapon Systems Support Mechanicsburg. The contract requires the manufacturing of these components in accordance with specific Navy drawings and material specifications, emphasizing the critical nature of the items for shipboard systems where failure could result in severe consequences. Interested vendors must adhere to stringent quality assurance and inspection requirements, including compliance with ISO standards and the submission of certification data prior to delivery. For further inquiries, potential bidders can contact Tiana Hammaker at 717-605-8399 or via email at TIANA.HAMMAKER@NAVY.MIL.
    13 - MD99 Divergence Rocket Motor
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is soliciting proposals for the procurement of the MD99 Divergence Rocket Motor. This procurement is restricted to Rockwell Collins and Nammo Defense, and it involves items classified as explosives, necessitating a Safety Survey and adherence to specific explosive weight and class requirements. The opportunity is critical for defense operations, as it pertains to the manufacturing of cartridge and propellant actuated devices and components. Interested parties can reach out to Ashley Leonard via email at ashley.leonard@navy.mil or by facsimile at 717-605-2807 for further details, noting that a limited drawing package is available but not on CD, and paper copies will not be provided.
    SHAFT,LATCH
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting bids for the procurement of a specialized component known as the "Shaft, Latch." This procurement is critical as the item will be utilized in a crucial shipboard system, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of life. The contract is subject to stringent quality assurance requirements and involves compliance with various specifications and certifications, with a closing date for submissions extended to December 3, 2024. Interested parties can reach out to Benjamin Spangler at benjamin.t.spangler.civ@us.navy.mil or by phone at 717-605-2147 for further details.
    25--PROPELLER SHAFT WIT
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 15 units of the Propeller Shaft WIT (NSN 2520015583743). This procurement is part of a potential Indefinite Delivery Contract (IDC) with a term of one year or until the total orders reach $250,000, with an estimated four orders per year and a guaranteed minimum quantity of two. The propeller shaft components are critical for vehicular equipment, and the items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS). Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil. The solicitation is available online, and hard copies will not be provided.
    43--SEAL ASSEMBLY,SHAFT
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting offers for the procurement of 33 units of Seal Assembly, Shaft, intended for use on Navy submarines. This opportunity includes updated requirements for design, manufacturing, and quality control, emphasizing the necessity for materials to be mercury-free to prevent contamination in submarine environments. The solicitation has been extended to November 25, 2024, and interested parties should direct inquiries to Jeffrey Dietrich at jeffrey.dietrich@navy.mil or call 717-605-4078 for further details.