0015 - Dust Ignition Layer Tester
ID: 1605C1-24-Q-00130Type: Solicitation
Overview

Buyer

LABOR, DEPARTMENT OFOFFICE OF THE ASSISTANT SECRETARY FOR ADMINISTRATION AND MANAGEMENTDOL - CAS DIVISION 1 PROCUREMENTWASHINGTON, DC, 20210, USA

NAICS

Other Scientific and Technical Consulting Services (541690)

PSC

LABORATORY EQUIPMENT AND SUPPLIES (6640)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/b6eada93141b4ad0984c2a4f4e8b2d55/view
Timeline
    Description

    The Department of Labor, specifically the Office of the Assistant Secretary for Administration and Management, is seeking proposals for the procurement of a Dust Ignition Layer Tester. The contractor will be responsible for providing all necessary personnel, equipment, tools, materials, supervision, and non-personal services as outlined in the Request for Quotation (RFQ) and the attached Statement of Work (SOW). This equipment is crucial for ensuring compliance with OSHA standards regarding hazardous materials, thereby enhancing workplace safety through accurate classification of combustible dusts. Interested parties must submit their quotes by September 20, 2024, at 2:00 PM EST, and any questions should be directed to Benyamin Dehghani at Dehghani.Benyamin@dol.gov, with a copy to Maria Britton at britton.maria.m@dol.gov, by September 18, 2024, at 8:00 AM EST.

    Point(s) of Contact
    Benyamin Dehghani
    Dehghani.Benyamin@dol.gov
    Maria Britton
    britton.maria.m@dol.gov
    Files
    Title
    Posted
    QA Log.xlsx
    The document outlines the process for submitting proposals in response to Requests for Proposals (RFPs) and outlines eligibility for federal grants. It emphasizes the importance of clearly defined project objectives, eligibility conditions, and submission timelines. The document specifies that applicants must present detailed budgets, project plans, and demonstrate capacity to execute project goals effectively. It also underscores the need for compliance with federal guidelines and evaluation criteria used in the selection process. State and local governments may offer additional opportunities for funding and collaboration. Overall, the document serves as a guide for potential applicants navigating the complexities of government funding processes, aiming to foster informed and competitive proposals while ensuring accountability and transparency in the use of federal and state resources.
    Sol_1605C1-24-Q-00130.pdf
    The document outlines a Request for Proposal (RFP) by the U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) for the procurement of a Dust Layer Ignition Tester. The primary purpose of this acquisition is to ensure compliance with OSHA standards regarding hazardous materials. The criteria for selection will follow a Lowest Priced Technically Acceptable (LPTA) basis with a fixed-price contract approach. The offer deadline is set for September 20, 2024, and the delivery of the product is expected within 154 days after receipt of order. The specifications demand an instrument operational up to 450° C, compatible with computers for data transfer, and the supplier must provide calibration support along with training for equipment maintenance. Additionally, liability for shipping costs lies with the supplier, who must also handle warranties and repairs. This RFP highlights OSHA's focus on using modern testing equipment to classify combustible dusts accurately, ensuring workplace safety. The document elaborates on the evaluation process, contractual terms, and compliance requirements, directing potential contractors to direct inquiries to specified contacts. Overall, it emphasizes the government’s commitment to maintaining safety standards through precise measurement and assessment tools in hazardous environments.
    Lifecycle
    Title
    Type
    0015 - Dust Ignition Layer Tester
    Currently viewing
    Solicitation
    Similar Opportunities
    0014 -Laboratory Gas Services
    Active
    Labor, Department Of
    The Department of Labor (DOL) is soliciting proposals for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide Laboratory Gas Services, specifically for the Salt Lake Technical Center (SLTC) in Sandy, Utah. The contractor will be responsible for delivering high-quality laboratory gases, including liquid nitrogen and argon, within three days of order, and must implement a robust quality control program to ensure compliance with contract standards. This procurement is critical for analytical testing and safety compliance, emphasizing reliability and adherence to federal regulations. Quotes are due by September 23, 2024, with questions accepted until September 19, 2024; interested parties should contact Benyamin Dehghani at Dehghani.Benyamin@dol.gov or Maria Britton at britton.maria.m@dol.gov for further information.
    0020 - Hazardous Waste Removal
    Active
    Labor, Department Of
    The Department of Labor is seeking proposals for hazardous waste removal services at the OSHA Technical Center in Sandy, Utah. The contractor will be responsible for providing comprehensive hazardous waste management, including collection, packaging, labeling, transportation, and disposal, in compliance with federal and state regulations. This procurement is crucial for maintaining environmental safety and public health, as the agency has disposed of over 500 chemicals in the last two years and aims to manage hazardous materials responsibly. Quotes are due by September 24, 2024, at 08:00 AM EST, and interested parties should direct inquiries to Maria Britton at britton.maria.m@dol.gov or Deborah Worrells at worrells.deborah@dol.gov.
    Detector, Combined C
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Troop Support, is seeking proposals for the procurement of 300 units of the Combined Detector, NSN 6630-01-013-5279. This solicitation, identified as SPE2DH24Q0116, is a request for quotations for commercial products and services, with a delivery requirement of 90 days after receipt of order (ARO). The detectors are critical for chemical analysis and measurement of electrical signals, underscoring their importance in defense operations. Proposals are due by October 3, 2024, at 3:00 PM EST, and interested parties should contact Zahkiyah Taylor at Zahkiyah.Taylor@dla.mil for further information.
    DUST COLLECTOR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Rock Island, is soliciting proposals for a dust collector to support operations at the Rock Island Arsenal’s Joint Manufacturing and Technology Center. The procurement aims to acquire a system that effectively manages nuisance dust generated during rubber manufacturing processes, ensuring compliance with safety and operational standards. This initiative is critical for maintaining air quality and operational readiness within specialized manufacturing environments. Proposals must be submitted by September 20, 2024, with a mandatory site visit scheduled for September 12, 2024. Interested vendors can contact John Jacobsen at JOHN.E.JACOBSEN16.CIV@ARMY.MIL for further details.
    49--TESTER,DIESEL FUEL
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of seven diesel fuel testers under solicitation number NSN 4910012490151. This procurement aims to establish an Indefinite Delivery Contract (IDC) for a term of one year or until the total orders reach $250,000, with an estimated four orders anticipated annually. The items will be delivered to various DLA depots both within the continental United States (CONUS) and outside (OCONUS), highlighting the importance of these testers in maintaining military vehicle operations. Interested vendors must submit their quotes electronically, and for any inquiries, they can contact the DLA at DibbsBSM@dla.mil.
    Automated Distillation Tester
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking to procure an Automated Distillation Tester, specifically the Tanaka Brand, Model AD-7, or an equivalent product. The procurement aims to acquire equipment that meets critical specifications, including a fire containment system, automatic overheat protection, an internal touch screen for user-friendliness, and compliance with ASTM D86 standards, which are essential for ensuring operational readiness and safety protocols. Interested vendors must register in the System for Award Management (SAM) and submit their quotations by September 24, 2024, with evaluations based on technical acceptability and lowest price. For inquiries, potential bidders can contact Alaina Hill at alaina.hill@us.af.mil or Kyle Newcomb at Kyle.newcomb@us.af.mil.
    29--DETECTOR,METALLIC P
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 12 units of the Detector, Metallic P (NSN 2995013545754). This solicitation is part of an RFQ process, and the approved source for this item is identified as 97484 4J2743. The detectors are critical components used in aircraft engine and engine parts manufacturing, highlighting their importance in maintaining operational readiness and safety. Interested vendors must submit their quotes electronically, as hard copies of the solicitation are not available, and all inquiries should be directed to the buyer via email at DibbsBSM@dla.mil. The deadline for delivery is set for 168 days after the award of the contract.
    66--DETECTOR KIT,GAS
    Active
    Dept Of Defense
    The Defense Logistics Agency, under the Department of Defense, is seeking quotes for the procurement of 12 units of a Gas Detector Kit (NSN 6665016278952). This solicitation aims to fulfill the need for reliable detection equipment, which is crucial for various military and defense applications. Interested vendors are required to submit their quotes electronically, as hard copies of the solicitation will not be provided, and the deadline for delivery is set for 165 days after the order. For inquiries, potential bidders can reach out via email to DibbsBSM@dla.mil, and further details can be accessed through the DLA's Digital Bid Board System.
    42--EXTINGUISHER,FIRE
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 26 fire extinguishers under solicitation number NSN 4210015156844. The extinguishers are critical safety equipment intended for use in various defense operations, ensuring compliance with safety regulations and protecting personnel and assets. Interested vendors must submit their quotes electronically, as hard copies will not be available, and all submissions should be directed to the buyer listed in the solicitation document. For inquiries, potential bidders can contact the DLA at DibbsBSM@dla.mil, with a delivery deadline set for 168 days after order approval.
    42--EXTINGUISHER,FIRE
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 79 fire extinguishers under solicitation number NSN 4210015156844. The extinguishers are critical for fire safety and emergency response, ensuring the protection of personnel and assets in various operational environments. Interested vendors must submit their quotes electronically, as hard copies will not be provided, and the deadline for delivery to DLA Distribution San Joaquin is set for 114 days after award. For inquiries, potential bidders can contact the buyer via email at DibbsBSM@dla.mil.