Pressure Power Washer
ID: FA812524Q0090-01Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8125 AFSC PZIMATINKER AFB, OK, 73145-3303, USA

NAICS

Air and Gas Compressor Manufacturing (333912)

PSC

SPACE AND WATER HEATING EQUIPMENT (4520)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/1ec2a35f060c42439fccf7161a72675e/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the procurement of seven electric hot water pressure washers, as outlined in the amendment to solicitation FA812524Q0090-01. These pressure washers must meet specific performance standards, including a minimum water output, a pressure of at least 2900 psi, and a temperature of no less than 135 degrees Fahrenheit, along with various safety and operational features to enhance efficiency within the 76th AMXG/569th unit. The acquisition is crucial for maintaining high operational standards and ensuring effective performance in their functions. Proposals are due by September 25, 2024, and interested vendors should contact Jacqueline Henn at Jacqueline.Henn@us.af.mil for further information.

    Point(s) of Contact
    Jacqueline Henn
    Jacqueline.Henn@us.af.mil
    Files
    Title
    Posted
    A24-053 Pressure Washer-Item Description_Revision 01_Redacted.pdf
    The Department of the Air Force's Headquarters Air Force Sustainment Center has issued a memorandum detailing a request for funding to purchase seven electric hot water pressure washers. The specifications for these washers include a minimum water output of gallons per minute, pressure of at least 2900 psi, and a temperature not lower than 135 degrees Fahrenheit. Key requirements involve a ½” pressure reducing valve, 480V input power, a 20-foot electrical cord, a TEFC electric motor, and a NEMA 4 watertight enclosure with operational controls. Additional features sought in the washers include a 150-foot hose, a manual rewind reel, interchangeable wash tips, safety mechanisms, and a steel frame with mobility features. This request aims to enhance operational efficiency within the 76th AMXG/569th unit by obtaining the necessary equipment to maintain high standards in their functions. The detailed list of specifications reflects the rigorous standards expected from the equipment to ensure effective performance for the intended use.
    FA812524Q0090-01.pdf
    The document is an amendment to a solicitation for procurement by the United States Air Force concerning pressure washers. The amendment details the incorporation of UL-1776 safety standards as a requirement for the equipment, correcting an omission in the original solicitation. The proposal due date remains the same: September 25, 2024. Additionally, it updates the evaluation criteria for proposals, emphasizing that vendors must present comprehensive technical descriptions to be deemed acceptable. The acquisition seeks seven electric hot water pressure washers with specific performance and safety characteristics. The government’s evaluation process will focus on technical acceptability and cost, ensuring that proposals meet specified minimum requirements without exceeding budget expectations. The document is designed to ensure that all terms and conditions are maintained while clarifying and updating crucial procurement information, reflecting the government’s effort to conduct transparent and effective acquisition processes.
    Lifecycle
    Title
    Type
    Pressure Power Washer
    Currently viewing
    Solicitation
    Similar Opportunities
    Pressure Power Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting bids for the acquisition of electric hot water pressure washers, aimed at supporting military equipment maintenance and operational readiness at Tinker Air Force Base, Oklahoma. The procurement requires seven units that meet specific technical specifications, including a minimum water output of X gallons per minute at 2900 psi, operational temperatures of at least 135 degrees Fahrenheit, and various safety features and accessories. This initiative underscores the federal government's commitment to inclusivity in contracting, as it is set aside for small businesses, including Women-Owned Small Businesses (WOSB). Interested vendors must submit their quotes and any inquiries in writing by the specified deadlines, with further details available from the primary contact, Jacqueline Henn, at Jacqueline.Henn@us.af.mil.
    Pressure Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking quotes for the procurement of six CoilPro CC-140 pressure washers for use at Malmstrom Air Force Base in Montana. This requirement is set aside for small businesses under the NAICS code 333248, which encompasses all other industrial machinery manufacturing, and aims to enhance operational efficiency through specialized cleaning equipment. Interested vendors must submit their written quotes by 2:00 PM MT on September 19, 2024, with inquiries due by September 16, 2024; for further information, potential bidders can contact Marquis Patton at marquis.patton.1@us.af.mil or Joshua D. Crist at joshua.crist.1@us.af.mil.
    Parts Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking proposals for a Parts Washer under a combined synopsis/solicitation notice. This procurement aims to acquire commercial products or services that align with the requirements outlined in the solicitation, which is designed for small businesses as indicated by the Total Small Business Set-Aside designation. The Parts Washer is essential for maintaining and repairing hand tools, ensuring operational efficiency at Fort McCoy, Wisconsin. Interested vendors can reach out to Marketplace Support at 1.877.933.3243 or via email at MarketplaceSupport@unisonglobal.com for further details, as proposals are currently being requested with no written solicitation to follow.
    Weedtechnics Satusteam Model SW800 Weed Steamer (Brand Name or Equal)
    Active
    Dept Of Defense
    The Department of Defense, specifically the 911th Airlift Wing, is seeking quotes for the procurement of a Weedtechnics Satusteam Model SW800 weed steamer or an equivalent model, as outlined in RFQ FA6712Q0050. The requirements include a high-capacity weed abatement unit with specific features such as a heating capability of 247°F, a generator pressure of 1000 psi, and a minimum water tank capacity of 250 gallons, along with necessary training and equipment for effective operation. This procurement is crucial for efficient weed management at the Coraopolis, Pennsylvania facility, emphasizing the importance of advanced technology and proper training for personnel. Interested vendors must submit their quotes by the specified deadline, and inquiries should be directed to Crystal Spurlin at crystal.spurlin@us.af.mil or Paul Davisson at paul.davisson@us.af.mil, with the deadline for questions set for September 18, 2024.
    Amendment 00001 - Pressure Washing Services - Maxwell AFB AL
    Active
    Dept Of Defense
    The Department of Defense, through the 42nd Contracting Squadron at Maxwell Air Force Base, Alabama, is seeking quotations for pressure washing services for three specific buildings at the base. The objective of this procurement is to enhance the appearance of the LeMay Center following recent upgrades, including HVAC repairs and carpet replacements, by ensuring the exterior walls and sidewalks are properly cleaned. This opportunity is a total small business set-aside under NAICS Code 561790, with a contract period of performance lasting 60 days post-award. Interested contractors must submit their quotes by September 23, 2024, at noon CST, and are encouraged to attend a site visit scheduled for September 16, 2024. For further inquiries, potential offerors can contact SrA Chase Flowers at chase.flowers@us.af.mil or Kimberly A. Knott at kimberly.knott.1@us.af.mil.
    49--CLEANER,STEAM,PRESS
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a steam cleaner, specifically NSN 4940013217675, under a Combined Synopsis/Solicitation notice. The requirement includes the delivery of one unit to the Mid Atlantic Regional Maintenance Center within five days after the order is placed, with the approved source being TRAC321-2RPW-M-NSU/FW-M-LHS. This equipment is crucial for maintenance and repair operations, ensuring operational readiness and efficiency. Interested vendors must submit their quotes electronically, as hard copies will not be provided, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.
    Front-Load Aqueous Part Washer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Iowa National Guard, is soliciting quotes for a front-load aqueous part washer along with associated services, including detergent, installation, and on-site training. The procurement aims to enhance operational efficiency within military maintenance facilities by acquiring equipment that meets specific salient characteristics, such as a rugged design and compliance with federal safety regulations. Interested contractors must submit their quotes electronically by 10:00 AM Central Time on September 19, 2024, ensuring compliance with the outlined specifications and including necessary documentation. For inquiries, potential bidders can contact Daniel Collins at daniel.w.collins.civ@army.mil or Megan Kaszinski at megan.r.kaszinski.civ@army.mil.
    100 LRS Warehouse Floor Cleaning Machine
    Active
    Dept Of Defense
    The Department of Defense, specifically the 100th Logistics Readiness Squadron at RAF Mildenhall, is seeking to procure an industrial-sized floor cleaning machine to support their Individual Protective Equipment (IPE) section. The required machine must meet specific salient characteristics, including a scrubbing width of at least 1000mm, a minimum tank capacity of 190 liters, and be powered by a maintenance-free Lithium Ion battery, among other specifications. This procurement is crucial for maintaining clean and safe facilities in compliance with UK Health and Safety regulations. Interested vendors must submit their price quotes via email by September 25, 2024, and ensure they have an active SAM account and a NATO Commercial and Government Entity (NCAGE) number. For further inquiries, vendors can contact Charles Kye at charles.kye.1@us.af.mil or Esther Hamilton at esther.hamilton@us.af.mil.
    PARTS WASHER LEASING WITH SOLVENT RECYCLING
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army, is seeking qualified contractors to lease parts washer machines and provide solvent recycling services at the Tobyhanna Army Depot in Pennsylvania. The procurement involves leasing 17 parts washer machines, supplying cleaning solutions, and ensuring proper installation and maintenance over a contract period of one base year with four optional years. These services are critical for maintaining operational efficiency and safety standards in equipment maintenance, as they involve regular cleaning and compliance with environmental regulations. Interested contractors must submit their quotations electronically by September 25, 2024, and ensure compliance with Federal Acquisition Regulation (FAR) requirements. For further inquiries, contact Michele Dooley at michele.a.dooley.civ@army.mil or Michael J Clark at michael.j.clark238.civ@army.mil.
    AIRCRAFT WASH
    Active
    Dept Of Defense
    The Department of Defense, specifically the Air Force Test Center at Eglin Air Force Base, is soliciting proposals for Aircraft Washing Services under the solicitation FA2823-24-Q-3024. The procurement requires contractors to provide all necessary materials, equipment, labor, and personnel to perform aircraft wash and lubrication services, particularly for F-35 aircraft, ensuring compliance with Air Force regulations and safety standards. This service is critical for maintaining aircraft availability and reducing maintenance workloads, with a focus on high-quality performance and adherence to environmental regulations. Interested small businesses must submit their firm fixed price quotes by 11:00 AM CST on September 10, 2024, and are encouraged to register for a site visit scheduled for August 27, 2024. For further inquiries, contact Lindsey Barrow at 850-305-8708 or via email at LINDSEY.BARROW.1@US.AF.MIL.