66--CALIBRATOR, DIGITAL
ID: N0010424QEB70Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

PSC

ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS (6625)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/3fa39da3109945ff8a264551894fd6f7/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of a digital calibrator. This opportunity involves the supply of electrical and electronic properties measuring and testing instruments, categorized under the NAICS code 334412, which pertains to Bare Printed Circuit Board Manufacturing. The digital calibrator is crucial for ensuring the accuracy and reliability of various electronic systems used in defense applications. Interested vendors must submit their quotes prior to the specified closing date, and for further inquiries, they can contact Colin O'Brien at 717-605-5769 or via email at COLIN.OBRIEN1@NAVY.MIL.

    Point(s) of Contact
    COLIN OBRIEN, N9434.25, PHONE (717)605-5769, EMAIL COLIN.OBRIEN1@NAVY.MIL
    COLIN.OBRIEN1@NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    66--CALIBRATOR, DIGITAL
    Solicitation
    66--CALIBRATOR, DIGITAL
    Currently viewing
    Presolicitation
    Similar Opportunities
    Calibrate and Repair Serial Number 1040C
    Active
    Dept Of Defense
    The U.S. Navy seeks quotes for repairing and calibrating specific serial number panel meter calibrators, issued through Solicitation N00421-24-Q-0371. These calibrators, manufactured by Arbiter Systems Inc., are vital for ensuring accurate measurements in electrical and electronic testing, and the Navy requires prompt quotations for a quick turnaround. The total contract value is approximately $10,000, with responses due by 1:00 pm EST on August 13, 2024, to the procurement group at Patuxent River.
    METER,SPECIAL SCALE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of a specialized meter, referred to as the "METER, SPECIAL SCALE." This contract requires the manufacture and design of the meter to meet specific technical requirements, including adherence to standards set by Hughes Corporation and exclusion of mercury in the materials used. The meter is critical for electrical and electronic properties measuring and testing, which plays a vital role in ensuring the operational readiness of naval systems. Interested vendors should direct inquiries to Duana Cloyd at 717-605-5722 or via email at DUANA.G.CLOYD.CIV@US.NAVY.MIL, with pricing valid for 60 days post-quotation submission.
    PANEL,TEST,ELECTRIC
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of electric test panels. This procurement falls under the NAICS code 334412, which pertains to Bare Printed Circuit Board Manufacturing, and involves the provision of electrical and electronic properties measuring and testing instruments as classified under PSC code 6625. The items are critical for ensuring the operational readiness and reliability of naval systems, emphasizing the importance of compliance with stringent quality and technical specifications outlined in the solicitation. Interested vendors should direct inquiries to Breanne R. Clippinger at 717-605-4893 or via email at BREANNE.R.CLIPPINGER.CIV@US.NAVY.MIL, and are advised that pricing for quotations is valid for 60 days post-closing date.
    66--INDICATOR,DIGITAL D
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Navy's NAVSUP Weapon Systems Support, is soliciting offers for the procurement of new manufacture spare parts, specifically for the item titled "66--INDICATOR, DIGITAL D." This procurement is focused on bare printed circuit board manufacturing and requires submissions that will be evaluated based on lead time, price, past performance, and capacity. The goods are critical for maintaining operational readiness and supporting various defense systems. Interested vendors must submit their quotes via email by 2:00 PM EST on the specified closing date, and any inquiries can be directed to Brian T. Kent at 215-697-0000 or via email at BRIAN.T.KENT.CIV@US.NAVY.MIL.
    METER,ELECTRICAL FR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of electrical meters under the title "METER, ELECTRICAL FR." This contract involves the manufacturing of bare printed circuit boards and the provision of electrical and electronic properties measuring and testing instruments, which are critical for various defense applications. The procurement is governed by specific quality assurance and inspection requirements, and interested vendors must comply with detailed technical documentation and standards outlined in the solicitation. For further inquiries, potential bidders can contact Joseph Darcy at 717-605-6696 or via email at JOSEPH.DARCY@NAVY.MIL. The solicitation details and requirements are available for review, and vendors are encouraged to submit their proposals within the specified timeframe.
    Vacuum Sensor Calibrators
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center, is seeking proposals for the procurement of Vacuum Sensor Calibrators under a Combined Synopsis/Solicitation notice. The contract will cover a minimum of one and up to eight units, with a duration of two years, aimed at enhancing the calibration capabilities necessary for operational standards in vacuum measurement. This acquisition is critical for ensuring compliance with Department of Defense standards and includes provisions for associated training services and technical documentation. Proposals must be submitted by October 3, 2024, at 12 PM PDT, to Brian Staub at brian.a.staub2.civ@us.navy.mil, with evaluations based on technical merit, past performance, and price.
    66--METER,SPECIAL SCALE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of a specialized meter, referred to as the "METER, SPECIAL SCALE." This contract requires the manufacture of this item in compliance with stringent quality and security standards, including the necessity for a valid U.S. security clearance due to the inclusion of classified information. The meter is critical for use on submarines and surface ships, emphasizing the importance of adhering to specific material requirements, such as being mercury-free. Interested contractors should reach out to Alison Bruker at 717-605-6447 or via email at ALISON.BRUKER@NAVY.MIL for further details, as the procurement process is governed by the Defense Priorities and Allocations System regulations, with a focus on timely delivery and compliance with all outlined specifications.
    66--DGTL RCVR, I/F
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of Digital Receiver Interface (DGTL RCVR, I/F) components. The contract requires the manufacture of these components in accordance with specified quality and inspection standards, including compliance with military specifications and the provision of traceability documentation for authorized distributors. These components are critical for various defense applications, ensuring reliable electronic performance and measurement capabilities. Interested vendors must provide proof of authorization as distributors and are encouraged to contact Prabit Dhital at 717-605-4358 or via email at prabit.dhital.civ@us.navy.mil for further details, with a minimum quotation validity of 45 days and a desired 60 days.
    Multifunction Calibrator
    Active
    Dept Of Defense
    The Department of Defense, specifically the Air Force Metrology Calibration Program (AFMETCAL), is conducting market research to identify potential sources for a Multifunction Calibrator. This device is intended to calibrate a variety of electrical test equipment, including digital multimeters and power analyzers, and must meet rigorous performance standards for high-precision electrical calibration. The Multifunction Calibrator will be a laboratory-grade instrument capable of sourcing DC and AC volts, resistance, and current, with specific operational features and compliance with ISO/IEC 17025 standards. Interested vendors are encouraged to submit their capabilities and relevant documentation by September 19, 2024, at 2:00 PM ET, and should direct inquiries to Megan Moretti or Frank Capuano via the provided contact details.
    AMMETER
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of ammeters under a federal contract. The primary objective of this procurement is to acquire electrical and electronic properties measuring and testing instruments, which are critical for various defense applications. The contract is set aside for small businesses, emphasizing the importance of supporting the small business sector in defense contracting. Interested vendors should direct inquiries to Trisha J. Wertz at 717-605-4142 or via email at TRISHA.J.WERTZ.CIV@US.NAVY.MIL, with proposals expected to be valid for 60 days post-submission.