Module Kit, SERVO VA
ID: FD20302500203Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8121 AFSC PZAAATINKER AFB, OK, 73145-3303, USA

NAICS

Aircraft Engine and Engine Parts Manufacturing (336412)

PSC

ENGINE FUEL SYSTEM COMPONENTS, AIRCRAFT AND MISSILE PRIME MOVERS (2915)
Timeline
    Description

    The Department of Defense, through the Air Force Sustainment Center, is preparing to procure a Module Kit, SERVO VA, for the F100-PW-220 aircraft engine, with a planned purchase of 204 units. This procurement is a strategic one-time buy, and contractors must be qualified sources to be considered for the award, as the government will not delay the contract award for pending qualification requests. The solicitation is expected to be issued on November 22, 2024, with a closing date of December 22, 2024, and the required delivery date set for January 1, 2026. Interested parties should direct inquiries regarding the source approval process to Ms. Kawika Tse Ah Lo at kawika.ah_lo@us.af.mil or call 405-739-5502, noting that the contract is contingent upon the availability of appropriated funds.

    Point(s) of Contact
    Files
    Title
    Posted
    The Department of the Air Force, through the Air Force Sustainment Center, is preparing to procure a Module Kit, SERVO VA, for the F100-PW-220 aircraft engine, with a single buy planned for 204 units. The estimated solicitation will be issued on November 22, 2024, and will close on December 22, 2024, with the required delivery date set for January 1, 2026. The purchase will be a firm fixed price contract, contingent upon the availability of appropriated funds. Approval as a qualified source is mandatory for contractors wishing to bid, and the government will not delay contract award for pending qualification requests. Any inquiries about the source approval process should be directed to the AFSC Small Business Office, and the solicitation will be available electronically at www.sam.gov. An Ombudsman has been designated to address concerns from offerors during the proposal phase but will not take part in the evaluation process. The procurement adheres to federal regulations and emphasizes the importance of compliance and qualifications in defense contracting.
    Lifecycle
    Title
    Type
    Module Kit, SERVO VA
    Currently viewing
    Presolicitation
    Similar Opportunities
    Module Kit, Servo Valve, NSN 2915012240746NZ (New manufacture)
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is issuing a presolicitation for a one-time Foreign Military Sales (FMS) procurement of the F100 Module Kit, Servo Valve (Part Number: 20105040, NSN: 2915-01-224-0746NZ). The procurement requires the delivery of 67 units of this electro-hydraulic component, which is critical for F100 engines, to Tinker Air Force Base in Oklahoma by January 1, 2026. Interested suppliers must meet qualification requirements as outlined in FAR 52.209-1 and are encouraged to submit Source Approval Requests (SARs) promptly, as contract award is contingent upon the availability of appropriated funds. The estimated solicitation issue date is November 21, 2024, with responses due by December 20, 2024; for further inquiries, interested parties can contact Clifford Darrington at clifford.darrington@us.af.mil or Ms. Kawika Tse Ah Lo at kawika.ahlo@us.af.mil.
    CONTROL UNIT, SUPERV; NSN:2995-01-519-5438NZ
    Active
    Dept Of Defense
    The Department of Defense, through the Air Force Sustainment Center at Tinker Air Force Base, is planning to procure 22 units of the Control Unit, Superv for the F100-PW-220 engine as part of a sole-source strategic one-time buy. This procurement is critical for maintaining and modernizing Air Force capabilities, and it is classified as a Firm Fixed Price contract with a required delivery date set for November 14, 2027. The anticipated solicitation will be issued on November 22, 2024, with a response deadline of December 22, 2024. Interested sources must be qualified in accordance with FAR 52.209-1 and are encouraged to submit Source Approval Requests (SARs) promptly, as the government will not delay the award for SAR reviews. For further inquiries, potential offerors can contact Ms. Kawika Tse Ah Lo at kawika.ahlo@us.af.mil or by phone at 405-739-5502.
    SPRTA1-25-R-0030 (NSN: 2840-01-205-0569)
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is seeking proposals for the acquisition of the F-100 Retainer Compressor, identified by RFP : SPRTA1-25-R-0030 and PR: FD2030-24-01541. The procurement involves supplying aluminum and steel alloy compressors, with an estimated requirement of 30 units, and a quantity range from a minimum of 16 to a maximum of 48 units, specifically for the F-100 engine. This component is critical for securing the 5th stage variable vanes in the rear compressor shroud assembly, underscoring its importance in aircraft engine performance. Interested parties must submit their proposals electronically by December 1, 2024, following the estimated issuance date of November 1, 2024, and can direct inquiries to Alson Dacalio at alson.dacalio@us.af.mil or by phone at 405-739-8448.
    F-100 Case, Diffuser, Aircr
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is preparing to issue a Request for Proposal (RFP) for the acquisition of F-100 Case, Diffuser, Aircraft components, specifically NSN: 2840-01-545-3268NZ. The procurement aims to acquire five units of these critical aircraft components, which are essential for the operation of military aircraft, with an estimated RFP issue date of November 20, 2024, and a close date of December 20, 2024. RTX Corporation is the approved source for this acquisition, and while the procurement is not set aside for small businesses, all responsible sources are encouraged to submit capability statements within 45 days of the announcement. Interested parties may contact Jeremy Bryant at jeremy.bryant@us.af.mil or by phone at 405-855-7112 for further information.
    Seal, Air, Aircraft G (F-100)
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency at DLA Aviation in Oklahoma City, is seeking proposals for the acquisition of a critical aircraft component, specifically a seal for the F100 engine. The procurement requires five units, including two for non-destructive testing and one for destructive testing, with the first delivery anticipated by May 4, 2026. This acquisition is classified as a critical safety item, emphasizing its importance in military and aerospace applications, and the government intends to negotiate with a limited number of sources, primarily General Electric Company, while remaining open to proposals from all responsible vendors. Interested parties should note that the Request for Proposal (RFP) is expected to be issued on October 17, 2024, with a closing date of November 18, 2024; for further inquiries, contact David Todd Isaac at david.isaac.4@us.af.mil or call 405-855-3000.
    SEAL, AIR, AIRCRAFT G (F-100)
    Active
    Dept Of Defense
    The Department of Defense seeks proposals for a federal contract to supply and deliver 85 units of the AIRCRAFT G (F-100) SEAL, a critical safety item used in aircraft engines. The seals must pass qualification testing and adhere to the delivery deadline of September 1st, 2025. This procurement is solicited under the justification of FAR 6.302, with the government intending to negotiate with a limited number of experienced suppliers. The Request for Proposal (RFP) FD2030-24-01460 will be hosted on www.fbo.gov, with a submission deadline of August 30th, 2024. The scope of work for the successful awardee will involve the manufacturing and delivery of the specialized seals, with a strong emphasis on price, technical expertise, and past performance. Todd Isaac, the buyer, should be contacted for any inquiries.
    NSN 1560-016807725, AIRCRAFT, F- 16 FLANGE,SPECIAL KIT
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is seeking proposals for the procurement of 36 units of the F-16 Flange Special Kit, identified by NSN 1560-016807725. This solicitation is for a Firm Fixed Price Contract, with delivery expected 274 days after receipt of order, and will be conducted as a 100% Small Business Set-Aside. The F-16 Flange Special Kit is critical for maintaining the operational readiness of military aircraft, and the solicitation is anticipated to be issued around November 25, 2024. Interested parties should direct inquiries to Ive Allen at ive.allen@dla.mil, and proposals must be submitted within 45 days of the notice publication to be considered.
    F101 DEC Repair
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the repair of the F101 Digital Electronic Control (DEC) under a requirements contract that includes one base year and four option years. This contract is expected to be sole sourced to Hamilton Sundstrand Corporation, indicating specialized repair needs that require contractor-furnished materials, as no Government Furnished Material will be provided. The repair services are critical for maintaining the operational readiness of military systems, ensuring that essential electronic components are functioning effectively. Interested vendors must submit their proposals by December 6, 2024, at 4:00 PM CST, and can direct inquiries to Brandi Bridgett at brandi.bridgett@us.af.mil or Tara Parker at tara.parker.4@us.af.mil.
    F-100 Case, Compressor, Air
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is seeking proposals for the acquisition of F-100 compressor air cases under the presolicitation notice SPRTA1-24-R-1845. This procurement aims to secure a minimum of 3 and a maximum of 18 units, with a delivery schedule of 2 units per month starting before June 16, 2025, and is not classified as a critical safety item. The solicitation will be available electronically, and proposals will be evaluated based on price, technical merit, and past performance, with submissions due within 45 days of publication. Interested parties can direct inquiries to Jeremy Bryant at jeremy.bryant@us.af.mil or by phone at 405-855-7112.
    Seal, Air, Aircraft G, NSN 2840016338198NZ - New manufacture
    Active
    Dept Of Defense
    The Department of Defense, through the Air Force Sustainment Center, is soliciting proposals for the manufacture of the Seal, Air, Aircraft G, specifically for the F100 engine, under a total small business set-aside contract. This procurement involves a one-time Foreign Military Sales (FMS) spares buy, requiring qualified sources to adhere to stringent quality assurance protocols and first article testing as outlined in the associated documentation. The goods are critical for maintaining operational readiness in military aviation, emphasizing the importance of compliance with safety and quality standards throughout the manufacturing process. Proposals must be submitted by December 4, 2024, at 2:00 PM CST, to the designated contacts, Clifford Darrington and Ms. Kawika Tse Ah Lo, via email.