48--VALVE,ANGLE
ID: N0010424QFE54Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

NAICS

Other Metal Valve and Pipe Fitting Manufacturing (332919)

PSC

VALVES, NONPOWERED (4820)

Original Source

https://sam.gov/opp/b511ffe36b464b3087dcb7ba4cbfa228/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of angle stop globe valves, classified under the NAICS code 332919. The valves are critical components intended for use in shipboard systems, where the use of incorrect or defective materials could lead to severe safety risks, including personnel injury or loss of the ship. Interested vendors should note that this opportunity is set aside for small businesses, and they must adhere to stringent quality assurance and inspection requirements as outlined in the solicitation. For further inquiries, potential bidders can contact Amanda L. Bailey at 717-605-3354 or via email at AMANDA.L.BAILEY50.CIV@US.NAVY.MIL.

    Point(s) of Contact
    Telephone: 7176053354
    AMANDA.L.BAILEY50.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    48--VALVE,ANGLE
    Currently viewing
    Solicitation
    48--VALVE,ANGLE
    Presolicitation
    Similar Opportunities
    48--VALVE,STOP-CHECK
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is seeking suppliers for the procurement of two stop-check valves under the presolicitation notice titled "48--VALVE, STOP-CHECK." The requirement includes National Stock Number (NSN) 7H-4820-015728210-X4, with a total quantity of two units to be delivered to the Norfolk Naval Shipyard in Portsmouth, VA. These valves are critical components in various naval applications, and the government has confirmed that the technical data package is complete, allowing for full and open competition among interested parties. For further inquiries, potential bidders can contact Danny L. Oneal at (717) 605-4954 or via email at DANNY.L.ONEAL1@NAVY.MIL. This opportunity is set aside for small businesses, and interested parties are encouraged to express their capabilities within 15 days of this notice.
    VALVE ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the manufacture of valve assemblies. This procurement aims to fulfill the requirements for valves classified under the NAICS code 332919 and PSC code 4810, which are critical components in various defense applications. The contract will require compliance with specific quality assurance standards, including government source inspection and adherence to packaging and marking protocols as outlined in the solicitation. Interested vendors should contact Ashley Betlock at 717-605-1028 or via email at ASHLEY.BETLOCK@NAVY.MIL for further details, and must be prepared to provide proof of being an authorized distributor of the original manufacturer's items. The solicitation encourages accelerated delivery and includes an option for increased quantity within 365 days of contract award.
    VALVE ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the manufacture of valve assemblies under a federal contract. This procurement requires compliance with specific quality assurance standards and documentation, including the provision of unique identification and valuation for the items. The valve assemblies are critical components used in various defense applications, emphasizing the importance of quality and reliability in their production. Interested contractors must ensure they are authorized distributors of the original manufacturer's items and are encouraged to contact Ashley Betlock at 717-605-1028 or via email at ASHLEY.BETLOCK@NAVY.MIL for further details. The solicitation includes various compliance requirements and is set to be awarded bilaterally, necessitating written acceptance from the contractor prior to execution.
    SAMPLE VALVE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of a commercial product, specifically a sample valve. This procurement is categorized under the NAICS code 332919, which pertains to Other Metal Valve and Pipe Fitting Manufacturing, and involves the supply of non-powered valves as indicated by the PSC code 4820. The valves are critical components for various defense applications, and compliance with specific quality assurance and inspection requirements is mandatory. Interested vendors should direct their inquiries to Zackary Loudon at 717-605-7722 or via email at ZACKARY.LOUDON@NAVY.MIL, with the solicitation details and requirements available for review. The pricing for the request for quotation is valid for 90 days post-closing unless otherwise specified.
    48--VALVE,BALL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the manufacture or refurbishment of ball valves, classified under the NAICS code 332919. The procurement aims to fulfill critical requirements for valves used in various defense applications, emphasizing the importance of quality and compliance with military specifications. Interested contractors should note that the deadline for submitting offers has been extended to 4:30 PM EST on November 27, 2024, and are encouraged to contact Madison M. Gray at 717-605-4056 or via email at MADISON.M.GRAY4.CIV@US.NAVY.MIL for further information.
    Valves
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy's Mid-Atlantic Regional Maintenance Center (MARMC), is seeking qualified sources to provide valves as outlined in the attached Statement of Work (SOW). This procurement is a Combined Synopsis/Solicitation for commercial items, adhering to the Federal Acquisition Regulation (FAR) Part 13 and utilizing Simplified Acquisition Procedures (SAP), with a strict requirement for all parts to be new—refurbished or used parts will not be accepted. The valves are critical components for various naval applications, emphasizing the importance of reliability and quality in their manufacturing. Interested parties should note that the solicitation number is N5005425Q0016, and they can contact Stephanie Forman at stephanie.forman1@navy.mil or 757-400-0263 for further details, with responses expected to be submitted through the System for Award Management (SAM) or Procurement Integrated Enterprise Environment (PIEE).
    VALVE,REGULATING,FL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the repair of the VALVE, REGULATING, FL. This procurement involves the repair and quality assurance of specific valve components, with a required turnaround time of 86 days and government source inspection mandated. The valves are critical components used in various defense applications, emphasizing the importance of timely and quality repairs to maintain operational readiness. Interested contractors should contact Marsha Williams at 717-605-2727 or via email at marsha.williams@navy.mil for further details, and must be prepared to meet the outlined requirements and deadlines as specified in the solicitation.
    48--VALVE,REGULATING,FL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of two regulating valves (NSN: 7RH 1680 016047492 E7). The contract requires the successful contractor to provide repair, testing, and inspection services to ensure the valves meet operational standards, with a focus on compliance with specified quality and inspection protocols. These valves are critical components for military applications, necessitating government source approval prior to award, and all proposals must include the required documentation as outlined in the NAVSUP WSS Source Approval Brochure. Interested parties should contact Ethan Stein at 215-697-2983 or via email at ethan.stein@navy.mil for further details and to ensure compliance with submission requirements.
    48--STEM,FLUID VALVE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of a stem for a 2-inch ball valve, classified under the NAICS code 332919 for Other Metal Valve and Pipe Fitting Manufacturing. This procurement is critical as the material will be utilized in a vital shipboard system, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of the ship. The solicitation includes specific quality assurance requirements and certifications, with a closing date extended to April 4, 2024. Interested vendors can contact Karen Palm at 717-605-4066 or via email at KAREN.PALM@NAVY.MIL for further details.
    48--VALVE,STOP-CHECK
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 15 units of the NSN 4820013322639 Stop-Check Valve. This solicitation is a Total Small Business Set-Aside, aimed at ensuring that small businesses can compete for this contract, which falls under the Industrial Valve Manufacturing industry (NAICS Code 332911). The valves are critical components used in various defense applications, ensuring proper flow control in systems. Interested vendors must submit their quotes electronically, as hard copies will not be available, and all inquiries should be directed to the buyer via the provided email address, DibbsBSM@dla.mil. The deadline for quote submission is 164 days after the award date.