C-FRAME HYDRAULIC PRESS
ID: 24-25-2002Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA AVIATIONRICHMOND, VA, 23237, USA

NAICS

Sheet Metal Work Manufacturing (332322)

PSC

HYDRAULIC AND PNEUMATIC PRESSES, POWER DRIVEN (3442)

Set Aside

No Set aside used (NONE)

Original Source

https://sam.gov/workspace/contract/opp/33d52252e90e44188303bb78f921ff4d/view
Timeline
    Description

    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research for the procurement of one C-Frame Hydraulic Press to be installed at the Ship Repair Facility (SRF) in Yokosuka, Japan. The requirement includes a turn-key machine with comprehensive services such as delivery, installation, training for operators, and technical data provision, adhering to various federal and military standards. This hydraulic press is critical for operations requiring a minimum thrust force of 350 metric tons and must be a new, commercially available model, with the contractor responsible for all associated installation services, including foundation work and hazardous material testing. Interested parties should submit their capabilities and responses to the sources sought notice via email to AVN IPE Market Research by the specified deadline, as this is not a request for proposals and no funds are available for response preparation.

    Point(s) of Contact
    Nicolasa Cicero
    avnipemarketresearch@dla.mil
    Files
    Title
    Posted
    24-25-2002.pdf
    This government solicitation outlines the minimum requirements for the acquisition and installation of a C-frame hydraulic press at Bld A-47 SRF-JRMC, Yokosuka, Japan. The document details comprehensive specifications for design, construction, and components, including safety features, hazardous material exclusions, and environmental protection. Key requirements involve adherence to various federal, military, and international standards (OSHA, ISO, NEMA, NFPA, JIS) for safety, electrical systems, and hydraulic/pneumatic components. The press must be a new, commercially available model with specific size and capacity parameters, including a minimum thrust force of 350 metric tons. The contractor is responsible for full installation services, including foundation work, geotechnical surveys, and lead/asbestos testing, and must provide technical data, a Plan of Action and Milestones (POA&M), and an Acceptance Test Plan (ATP). Training for five operators in Japanese is also required. Quality assurance includes origin and destination inspections and tests for alignment, accuracy, operation, performance, and audible noise level.
    Lifecycle
    Title
    Type
    C-FRAME HYDRAULIC PRESS
    Currently viewing
    Sources Sought
    Similar Opportunities
    ONE (1) C-FRAME HYDRAULIC PRESS
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one C-Frame Hydraulic Press. This equipment is required to meet specific operational needs and must be delivered with training, technical data, an IUID tag, shipping, installation, and foundation support. The hydraulic press is crucial for various manufacturing processes, emphasizing the importance of reliable machinery in defense logistics. Interested vendors should note that the solicitation is expected to be issued on December 20, 2024, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, potential bidders can contact Edmund Quee at edmund.quee@dla.mil or by phone at 804-279-2589.
    Plasma Cutting Machine
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for a Computer Numerically Controlled (CNC) Plasma Cutting Machine to be delivered and installed at the Ship Repair Facility (SRF) in Yokosuka, Japan. The procurement requires a turn-key solution that includes the machine itself, technical data, delivery, installation, and comprehensive training for operators and maintenance personnel, adhering to various federal and Japanese industrial standards. This machine is critical for enhancing the capabilities of the U.S. Naval Ship Repair Facility, ensuring efficient and precise metal cutting operations. Interested vendors should submit their capabilities and comments on the draft statement of work by emailing AVN IPE Market Research at AVNIPEMarketResearch@dla.mil, with responses due by the closing date listed on SAM.gov.
    Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center outfitted with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or equivalent 6-Axis Universal Floor Type Milling Center with active dampening system equivalent to the DAS+.
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research to identify vendors capable of supplying a Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center equipped with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or an equivalent system. This procurement includes not only the milling center but also comprehensive turnkey services such as installation, removal of existing equipment, foundation work, shipping, tooling, training, and technical documentation. The equipment will be utilized at the Fleet Readiness Center-EAST in Cherry Point, North Carolina, highlighting its significance in supporting military readiness and operational capabilities. Interested parties are encouraged to submit their capabilities by emailing avnipemarketresearch@dla.mil, with responses due by the closing date of the SAM.gov posting, as this is a sources sought notice and not a formal solicitation.
    MIN QTY Two (2) hard bearing, dual drive, horizontal balance machines with potential option for QTY 2
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking responses from interested parties for the procurement of two hard bearing, dual drive, horizontal balance machines, with a potential option for two additional units. The machines must meet or exceed the Society of Automotive Engineering (SAE) 1000 class specifications and be capable of balancing aerospace jet engine rotors, with specific requirements for each machine regarding weight handling and operational capabilities. This procurement is critical for maintaining the operational efficiency of aerospace components at Tinker Air Force Base in Oklahoma, and interested vendors are encouraged to submit their capabilities and comments on the statement of work by the specified deadline. For further inquiries, interested parties can contact Christopher Bara at avnipemarketresearch@dla.mil, ensuring to include the notice ID number in their submissions.
    Request for Interested Manufacturers C-5 Direct Linear Valve - NSN: 4810001164496UC
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Warner Robins, Georgia, is conducting market research to identify manufacturers capable of producing the C-5 Direct Linear Valve, National Stock Number (NSN) 4810001164496UC, Part Number 36190-1. This hydraulic directional control valve assembly is critical for the C-5 Aircraft, operating at a pressure of 3000 PSIG and measuring 6.88 inches in length, 3.18 inches in width, and 4.18 inches in height. The government intends to award a sole source contract to Eaton Aerospace LLC, the original equipment manufacturer, due to their exclusive knowledge and possession of the necessary technical data. Interested manufacturers must express their capabilities by emailing Trent Miller or Todd Stimus by February 2, 2026, although this announcement does not constitute a solicitation or commitment to award a contract.
    FD2030-25-01729
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation Oklahoma City, is issuing a special notice for the procurement of a hydraulic drive unit, specifically NSN 1650-01-308-0839. The requirement includes the provision of the drive unit as per the top drawing 16VM003001-5, with the latest revision dated January 26, 2023. This component is critical for aircraft hydraulic systems, ensuring operational efficiency and safety in military aviation. Interested vendors should refer to the solicitation information for further details and await the approval of the contracting officer for submission of quotes.
    Request for Interested Manufacturers for C-5 Direct Linear Valve - NSN: 4820001614098UC
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation at Warner Robins, Georgia, is conducting market research to identify manufacturers capable of producing the C-5 Direct Linear Valve, identified by National Stock Number (NSN) 4820001614098UC. This dual shuttle hydraulic valve, essential for controlling hydraulic fluid direction on the C-5 aircraft, is made of steel and aluminum, with specific dimensions and weight requirements. The DLA intends to award a sole source contract to ITT Aerospace Controls LLC, as the original equipment manufacturer, PneuDraulics Inc., is the only known source with the necessary technical data and capabilities. Interested parties must express their interest and capability by emailing Kaleb Medders or Todd Stimus by January 5, 2026, to be considered for this opportunity.
    30--CONTROL ASSEMBLY,HY
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a Control Assembly, Hydraulic (NSN 3040016658014) intended for delivery to the USS John F. Kennedy (CVN-79). The solicitation requires the submission of quotes for one unit, with a delivery deadline of five days after award. This component is crucial for mechanical power transmission applications within naval operations, ensuring the reliability and functionality of critical systems. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    22-25-1009 two(2) Fives Giddings & Lewis PT 1500 Plain Table CNC Horizontal Boring Mills (HBM) with Integrated Contouring Heads (ICH)
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one Fives PT 1500 Plain Table CNC Horizontal Boring Mill (HBM) with an Integrated Contouring Head (ICH), with an option to purchase a second unit at a later date. This procurement aims to fulfill the government's requirements for advanced machining capabilities, which are critical for operations at the Puget Sound Naval Shipyard, including tooling, training, foundation work, and equipment removal. The solicitation has been amended to extend the closing date to December 29, 2025, and requires offers to remain valid for 120 days. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil for further details.
    51--JACK,HYDRAULIC,HAND
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of hydraulic hand jacks, specifically NSN 5120005445647, under a total small business set-aside. The requirement includes a quantity of two units to be delivered to DLA Distribution within 171 days after order placement. Hydraulic hand jacks are critical tools used in various military and industrial applications for lifting and moving heavy loads safely and efficiently. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be available, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.